Controllers: Controllers are
mostly used to control RGB lighting. RGB controllers
we provide a easy way to control color for your low
voltage LED RGB lights. Each controller has a easy to use
interface and comes with installation instructions. Please call
us if you have any questions?
The LW-0DMX-D4-01 controller has two
function capabilities. It can be used as a simple RGB color
controller with an IR (infrared) remote or as a DMX decoder;
receiving commands from a master controller.
Input voltage: DC 12V/24V (Class two Input
Max Input power: 60W (12VDC) 100W (24VDC)
Control distance: 9m (29.5 Feet) front of
the infrared receiver
Output channel: Three-way constant PWM
Infrared extension cable length: 1.2m (48”)
CIncludes: infrared cable and remote.
The third generation STICK
with a Integrated a color display. It is compatibility
with all Nicolaudie computer software and mobile apps. The
controller has been designed to accept the most challenging
projects with ease. This complete stand alone wall-mounted DMX
controller is the perfect answer to interior lighting control
expectations. Along with a state of the art design, the product
comes with amazing features such as 1024 DMX channels, touch
sensitive panel, clock/calendar, remote control, Ethernet
facilities, and much much more....
The STICK-DE3 can be adapted to any
environment. Control dynamic lighting inside a house, bar,
office block, shopping center, hotel or even a landmark. With
1024 DMX output channels and the ability to store 500 scenes
across 10 zones, the DE3 is one of the best value controllers on
the market today.
The STICK-DE3 includes an Ethernet network
connector allowing you to connect your STICK to a Local Area
Network (LAN). Once connected, the unit can be controlled from
the STICK remote app or programmed using the
*Arcolis app for *Apple iOS and
*Google Android devices.Easily controls the LN-DMXTCON-4CH-LV
DMX decoder (below).
PAVO-DIAL-DMX-12V (DMX Master)
to use PAVO
DIAL DMX Controller with 7 mode settings: red, green, blue,
white, fade 1, fade 2 and random flash. Mode setting can be set
by turning the dial to the right or left when it is in the first
of four positions. When the dial is pushed in, the mode color
will shift to the second position which allows the user to
adjust the single color or the speed of fade 1, fade 2 or random
flash. Push and hold for two seconds to turn off. Can be used to
control with DMX on channel 1,2 and 3.
Unit can be a master DMX controller and control multiple
3CH LOW VOLTAGE DMX DECODERDMX512 Decoder, 12/24V, 5 AMP MAX, 3 Per channel. Converts to
the universal standard DMX512/1990 signal into analog signal.
Features easy DMX channel setting using rotary numbers settings.