www.ledworldlighting.com
Call 1-800-387-4081
(403)256-0074
...it's what we do with light!
 

HOME · LINKS ·EMAIL
 

 EMAIL




Questions?
1-800-387-4081

Call,
we can help!
LED Ribbon: Animated new button #1
 LED RIBBON LIGHT (A.K.A FLEXSTRIP LIGHTING) is a low  voltage (12 volt) Super Bright LED lighting in a flexible thin PCB strip that is available in there varieties; regular Flexstrip type A, suitable for dry location and two other types featuring water resistance (IP 68). Type C has a protective Silicone jacket and Type B has a encapsulated plastic Gel.

Designed for the lighting professional, this lighting can be used for architectural lighting, sign letter light, concealed lighting perimeter lighting and many other applications. Available in red, green, blue, yellow and white colors including RGB that allows you to change colors with the optional controller. LED Flex Strip Lighting is available with a clip (Silicone Type) on or tape base for easy install. The base is flat and flexible and can be easily mount onto most flat surfaces. It's small size and low voltage makes this lighting ideal for a wide range of applications. Typically it is twice as bright as LED rope lighting. Can be cut to size by at each 3 LED (12V model) intervals at marking points  (by electricians) and rejoined by soldering at marked soldering points.
  • Applications
  • Border or perimeter lighting.
  • Architectural decorative lighting .
  • Use indoor and outdoors (Silicone or Gel Type only) use  to highlight areas.
  • Concealed lighting
  • Cove and under cabinet lighting.
      
  • Features
  • Available in 12 or 24 volts.
  • Super Bright 3528 & 5060 SMD LEDS.
  • Little or no heat, low power consumption.
  • Can be cut to size at marked intervals and rejoined by electricians.
  • Operating temperature: -10 C ~ 40 heat C.
  • Long life span of LED lights, 30,000 hours plus.
  • RGB Color changing available.
  • Continuous length flexible LED light strips
  • Solid-state, high vibration resistant SMD chips.
  • Small & powerful LED!
  • Single color includes indoor type barrel connector.
    •

    Three varieties of LED Flex Strip
    Type A: Regular LED FLEXSTRIP:  PCB (Printed Circuit board) material with double sided tape. For dry locations (INDOOR). Easy to access solder points to rejoin. Recommend for use with channel track. Type B: Like type A, except it PCB material is encapsulated with a plastic Gel and double sided tape. Water resistant coat (IP68). Type C: Like type A, except PCB material is encapsulated with a Silicone jacket. Water resistant coat (IP68). Easy to access solder points to rejoin.
    Note that the connectors (power source) for type A, B and C are for dry locations only. If FLEXSTRIP is cut or rejoined, it is no longer water resistant. Certain electrical precautions must be taken. Consulted with a licensed electrician before proceeding with install and read all instructions enclosed in packaging.
    Single Color feature the Super Bright 3528 & 5060 (3 LEDS in 1) SMD LED CHIP
    Note that you need a 12 volt  power supply to power one roll of the 12 volt Flex Strip below. It is NOT included.

    Item

    Roll 5M (16.4FT)

    LED Qty Roll

    Color

    Type

    View Angle

    Luminous flux (lm)

    L*W*H (mm) Roll

    Price
    Roll
    16.4 Ft

    		 Cart

    Volts

    Watts

    Amps

    FSC-5M-12V-60-R

    		  

    12VDC

    24W

    2

    300

    Red

     C

    140

    30

    5000*8*2 (16.4FT)

    $169.00

    FSC-5M-12V-60-Y

    		  

    12VDC

    24W

    2

    300

    Yellow

     C

    140

    30

    5000*8*2 (16.4FT)

    $169.00

    		 -

    FSC-5M-12V-60-B

    		  

    12VDC

    24W

    2

    300

    Blue

     C

    140

    18

    5000*8*2 (16.4FT)

    $169.00

    FSC-5M-12V-60-G

    12VDC

    24W

    2

    300

    Green

     C

    140

    48

    5000*8*2 (16.4FT)

    $169.00

    FSA-5M-300-12V-W

    		  

    12VDC

    24W

    2

    300

    Pure White

    A

    140

    48

    5000*8*2 (16.4FT)

    $139.00

    FSC-5M-300-12V-W

    		  

    12VDC

    24W

    2

    300

    Pure-White

    C

    140

    52

    5000*12*4 (16.4FT)

    $149.00

    FSC-5M-300-12V-WW

    12VDC

    24W

    2

    300

    Warm-White

    C

    140

    52

    5000*12*4 (16.4FT)

    $159.00

    FSB-5060-5M-150-12V-W

    		  

    12VDC

    36W

    3

    150x3

    Pure-White

    B

    140

    80

    5000*14*5 (16.4FT)

    $188.00

    		 IN STOCK
    Note that you need a 12 volt  power supply to power one roll of the 12 volt Flex Strip. It is NOT included.
    RPT4012P5A: Indoor AC/DC Adapter - 12VDC 3.3A Switching Power Supply. Lightweight, compact desktop switching power supply for indoor use. Features a universal input voltage of 100-240VAC 50/60Hz and includes a barrel type (coaxial) output connector as indicated. Can power one roll (6 meters max) of LED Flex strip. Not dimmable.
    $45.00  
    COLOR CHANGING RGB 5060 SMD LED CHIP (3 LED (RED, GREEN, BLUE) inside of each chip)

    Item

    Roll 6M (19.7FT)

    LED Qty Roll

    Color

    Type

    View Angle

    Luminous flux (lm)

    L*W*H (mm) Roll

    Price
    Roll

    		 Cart

    Volts

    Watts

    Amps

    FSB-5060-6M-180-12V-RGB

    		  

    12VDC

    39W

    3.3

    180 x 3

    RGB

    B

    140

    -

    (6000*14*5)
    19.7FT

    $210.00

    		  

    FSC-5060-5M-150-12V-RGB

    		  

    12VDC

    36W

    3.0

    150 x 3

    RGB

    C

    140

    -

    (5000*14*5)
    16.4FT

    $189.00
     

    CT-308 RGB LOW VOLTAGE LED CONTROLLER (RGB color changer):
     Controller is used to change colors of the RGB Flex Strip and can be used to control other low voltage RGB LED lighting. Changes LED lighting gradually or in a pattern from white, green, blue, red, orange, cyan and many more. Can also be used as a dimmer. Maximum voltage 24 volts & maximum amps is 3.

    Specification:
     Working Temperature: -10 to 40 degrees Celsius
    MAX In/output Voltage: 12VDC OR 24VDC
    Dimension: 8.5" X 1.5" X 1.5"
    Connecting Mode: Common anode
    Max Current:3A for each color
    Working current: 3 amps.
    For Indoor use.
    $98.00

     
    RP-306 LOW VOLTAGE DATA REPEATER:
     The Data repeater is used in combination with the RGB LED controller to repeat the signal coming from the RGB controller. Required every 20 feet. With this repeater you can extend the LED RGB lighting and have color changing effect continue.  Maximum voltage 24 volts & maximum amps is 3.
    Specification:
     Working Temperature: -10 to 40 degrees Celsius
    MAX In/output Voltage: 12VDC OR 24VDC
    Dimension: 6.5" X 1.5" X 1.0"
    Connecting Mode: Common anode
    Max Current:3A for each color
    Working current: 3 amps.
    For Indoor use.
    $88.00

     

    INSTALLATION: CHANNEL TRACK:
    Channel track allows you to to create straight perimeter outlines on most surfaces while protection the Flex Strip. Channel is a plastic material that can be easily attached to most surfaces such as wood, metal and brick. After the channel is in place and installed, simply peel off the adhesive backing from Flex Strip and install into the track. Not required for LED Flex Strip model with Silicone jacket or type B. Comes in 3 foot  (36" x 5/8" x 3/8") long pieces that can be cut  to size ($3.89 ea).

    Install fuse between power supply and Flex Strip Lighting to avoid damage or hazards.
    This product is for industrial use only for installation by locally licensed electricians, engineers and electrical professionals. Advance wiring and soldering skills required. Sold in rolls only. Prices in USD. Specifications subject to change without notice. Note: 1 inch = 25.4mm. Not for mission critical mission or aircraft use.

    • Technical Data:
    • Standard Length: 5 & 6 Meters per Reel
    • Printed Circuit Board Width: 8mm for Single Color (12mm for Silicone), 10mm for RGB Color excluding covering.
    • Printed Circuit Board thickness: 0.2-0.25mm.
    • Working Voltage: 12VDC
      •
    • 3 LEDs each as one series.
    • Maximum working Current: 2A for Single Color at 5 meters, 3.3 amps at 6 meters.
    • Caution:
    • Connection soldering can be only made on selected soldering area.
    • Max. soldering temperature can not exceed 260 Celsius degree for a max of 10 seconds.
    • The Min. bending radius is 2cm. The light and all its components can not be mechanically pressed.
    • During installation, do not damage the printed circuit.
    • Only qualified electrician or engineer can perform installation. Correct polarity is imperative.
    • Parallel connection only.
    • Keep away from flammable materials and fire.
    • Safety fuse is required for each roll before connection to power source.
    • When install on conductive surface, needs isolation point between light and surface.
    • Damage from corrosion is NOT subject to material defect claims.
    • Voltage must not exceed 12VDC and must be regulated.
    • Tape may damage surface when removing.
    • Do not cross PCB strip or power on when in a roll (it will damage the LEDS). Roll out completely straight before applying power.
      •
    • For professional and commercial use only.
    • Maximum length is 5 meters (16.4 feet), for 3528 SMD and 6 meters for 5060 SMD. Do NOT exceed.
    • Never power when on reel.
    • Static electricity will damage LEDS!
    • Install using Channel Track for type A. Flex Strip must be protected after install by a non-conductive surface.

    LED FLEX STRIP LIGHTING: is for commercial use and sale only. Qualified trades people that are familiar and knowledgeable with general construction and electrical installation techniques should only do the installation. Licensed electricians should provide all installation and hook-up of both the primary input and secondary outputs of the Power Supply. All installation and hook-up should be done in accordance with all national and local codes. Transformers that may be required should be provided by the licensed electrician in accordance electrical codes and laws.