1-800-387-4081
The 90W DriveTone LED driver utilizes a wireless signal. It requires only the same wire set as a standard LED Driver, reducing labor time and installation cost. Providing smooth, dimming down to 0.1% before total darkness, and softly tuning color temperature.
This UL listed Class 2 Driver line has an integrated junction box with a separate input and output wiring compartment each with three ⅞” knockouts for easy and safe installation.
DriveTone Dimmable LED Driver Features
| Smooth Color Temperature Control |
| No Extra Components Necessary |
| UL Listed Class 2 |
| Superior Flicker-Free Dimming to 0.1% |
| No Compatibility Issues |
| Current Limit Overload Protection |
| Auto-Reset Short Circuits Protection |
Product Description
The 90W DriveTone LED driver utilizes a wireless signal. It requires only the same wire set as a standard LED Driver, reducing labor time and installation cost. Providing smooth, dimming down to 0.1% before total darkness, and softly tuning color temperature.
This UL listed Class 2 Driver line has an integrated junction box with a separate input and output wiring compartment each with three ⅞” knockouts for easy and safe installation.
DriveTone Dimmable LED Driver Features
| Smooth Color Temperature Control |
| No Extra Components Necessary |
| UL Listed Class 2 |
| Superior Flicker-Free Dimming to 0.1% |
| No Compatibility Issues |
| Current Limit Overload Protection |
| Auto-Reset Short Circuits Protection |
Technical Specifications
| Rated Power | 90W |
| Rated Current | 3.75A |
| Rated Voltage | 24VDC |
| No Load Voltage | 25.2VDC |
| Voltage Ripple and Noise | 300mV (Vp-p) |
| Input Voltage | 120VAC +/- 10% |
| Input Frequency | 60Hz |
| Power Factor | 0.96 |
| Efficiency (Max Load) | 89% |
| Over Current | CC Mode |
| Short Circuit | Hiccup mode, auto-recovery after short circuit removed |
| Size | L 8”(213mm) x W 4.1”(104mm) x H 1.5”(38mm) |
| Certifications | cULus Listed |
Product Accessories
DimTone Dynamic White Wall Switch System
| Input | 120VAC-60Hz |
| max Load | 700W |
| Load Type | CCT Dimmable LEDs |
Product Description
The 90W DriveTone LED driver utilizes a wireless signal. It requires only the same wire set as a standard LED Driver, reducing labor time and installation cost. Providing smooth, dimming down to 0.1% before total darkness, and softly tuning color temperature.
This UL listed Class 2 Driver line has an integrated junction box with a separate input and output wiring compartment each with three ⅞” knockouts for easy and safe installation.
DriveTone Dimmable LED Driver Features
| Smooth Color Temperature Control |
| No Extra Components Necessary |
| UL Listed Class 2 |
| Superior Flicker-Free Dimming to 0.1% |
| No Compatibility Issues |
| Current Limit Overload Protection |
| Auto-Reset Short Circuits Protection |
Technical Specifications
| Rated Power | 90W |
| Rated Current | 3.75A |
| Rated Voltage | 24VDC |
| No Load Voltage | 25.2VDC |
| Voltage Ripple and Noise | 300mV (Vp-p) |
| Input Voltage | 120VAC +/- 10% |
| Input Frequency | 60Hz |
| Power Factor | 0.96 |
| Efficiency (Max Load) | 89% |
| Over Current | CC Mode |
| Short Circuit | Hiccup mode, auto-recovery after short circuit removed |
| Size | L 8”(213mm) x W 4.1”(104mm) x H 1.5”(38mm) |
| Certifications | cULus Listed |
Product Accessories
DimTone Dynamic White Wall Switch System
| Input | 120VAC-60Hz |
| max Load | 700W |
| Load Type | CCT Dimmable LEDs |
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.