RGB-W LED Wall Washer (4 LEDs in 1 Chip) with High Power LEDs for Indoor/Outdoor use. Color control available via standard DMX or built-in color settings. Use for lighting outside building perimeters, casinos, feature walls, bridges, shopping centers, theme parks, entertainment plazas and more.
The high-powered 4 in 1 LED (Red, Green, Blue and white) uses a single LED lens to produce even and consistence color effects with an added a white LED to create accurate white hues. The LWW-W80-L12 4 in 1 RGBW Wall Washers features Angle adjustable mounting brackets with the 25 degrees lens for accurate color and washes on building walls.
LWW-W80-L12 4 in 1 RGBW Wall Washers come with three different control methods: Independent Mode, DMX Mode and Master/Slave Mode. Independent Mode allows to choose pre-programmed lighting effects; while under DMX Mode Wall washer will be compatible with any DMX512 console to meet requirements from lighting designers. Master/Slave mode allows auto online and synchronization working.
Use the optional HUEDA™ controller to control the RGBW LED Wall Washers VIA software and smart phone app.
Building façade lighting Flood lighting and wall washing light |
Indoor lighting for special events, concerts, clubs & hotels |
Landscape lighting for gardens, theme parks and entertainment plazas |
With the dimension of L1240 x W78 x H118 (mm), it can illuminate large areas |
Each Red, Green, Blue and Warm White LED has a color depth of 256 shades. The Warm White LED can be mixed with the other colors to provide a cooler white. |
Includes mounting brackets that can rotate for easy installation and color wash angle. |
180° rotary angle makes directing light to the right angle |
25° degrees lens for accurate color washing |
RGBW color-changing modes operating through our DMX controller |
IP65 rated, applicable for outdoor and indoor applications |
High quality Epistar LEDs used, ensuring a long life span of over 40,000 hours |
RGB-W LED Wall Washer (4 LEDs in 1 Chip) with High Power LEDs for Indoor/Outdoor use. Color control available via standard DMX or built-in color settings. Use for lighting outside building perimeters, casinos, feature walls, bridges, shopping centers, theme parks, entertainment plazas and more.
The high-powered 4 in 1 LED (Red, Green, Blue and white) uses a single LED lens to produce even and consistence color effects with an added a white LED to create accurate white hues. The LWW-W80-L12 4 in 1 RGBW Wall Washers features Angle adjustable mounting brackets with the 25 degrees lens for accurate color and washes on building walls.
LWW-W80-L12 4 in 1 RGBW Wall Washers come with three different control methods: Independent Mode, DMX Mode and Master/Slave Mode. Independent Mode allows to choose pre-programmed lighting effects; while under DMX Mode Wall washer will be compatible with any DMX512 console to meet requirements from lighting designers. Master/Slave mode allows auto online and synchronization working.
Use the optional HUEDA™ controller to control the RGBW LED Wall Washers VIA software and smart phone app.
Building façade lighting Flood lighting and wall washing light |
Indoor lighting for special events, concerts, clubs & hotels |
Landscape lighting for gardens, theme parks and entertainment plazas |
With the dimension of L1240 x W78 x H118 (mm), it can illuminate large areas |
Each Red, Green, Blue and Warm White LED has a color depth of 256 shades. The Warm White LED can be mixed with the other colors to provide a cooler white. |
Includes mounting brackets that can rotate for easy installation and color wash angle. |
180° rotary angle makes directing light to the right angle |
25° degrees lens for accurate color washing |
RGBW color-changing modes operating through our DMX controller |
IP65 rated, applicable for outdoor and indoor applications |
High quality Epistar LEDs used, ensuring a long life span of over 40,000 hours |
Input Voltage | 120V~240VAC |
Size | L 1240 x W 78 x H 118mm (48.81″ x 3.07″ x 4.64″) |
Body | Extruded Aluminium/6063 |
LED Qty | 48 pcs power LED/1W (4 in 1 chip) |
Color | R-12, G-12, B-12, W/WW-12 |
Working Volt | 24VDC Driver |
Power Consumption | 52W (Max.) |
LEDs | 25° (4 in 1) |
Operation Temp. | -20°C~40°C (-4°F~104°F) |
Work Environment | IP65 (applicable for dry, wet, damp environment) |
DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting. Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 5 channels 256 shades of brightness.
DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures. Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.
H-2102B(W) is the water resistant standard DMX512 compliant control interface, allows you to set DMX address via digital numeric display. Compatible with DMX Master HUEDA™.
Wireless DMX 3-pin XLR Female connector- Receiver. LC-512x-F works with H-DMX2108A-5M-3 and receives signal from LC-512x-M.
Wireless DMX 3-pin XLR Male connector- Transceiver. LC-512x-M works with H-DMX2108A-5M-3 and transmits signal to LC-512x-F.
RGB-W LED Wall Washer (4 LEDs in 1 Chip) with High Power LEDs for Indoor/Outdoor use. Color control available via standard DMX or built-in color settings. Use for lighting outside building perimeters, casinos, feature walls, bridges, shopping centers, theme parks, entertainment plazas and more.
The high-powered 4 in 1 LED (Red, Green, Blue and white) uses a single LED lens to produce even and consistence color effects with an added a white LED to create accurate white hues. The LWW-W80-L12 4 in 1 RGBW Wall Washers features Angle adjustable mounting brackets with the 25 degrees lens for accurate color and washes on building walls.
LWW-W80-L12 4 in 1 RGBW Wall Washers come with three different control methods: Independent Mode, DMX Mode and Master/Slave Mode. Independent Mode allows to choose pre-programmed lighting effects; while under DMX Mode Wall washer will be compatible with any DMX512 console to meet requirements from lighting designers. Master/Slave mode allows auto online and synchronization working.
Use the optional HUEDA™ controller to control the RGBW LED Wall Washers VIA software and smart phone app.
Building façade lighting Flood lighting and wall washing light |
Indoor lighting for special events, concerts, clubs & hotels |
Landscape lighting for gardens, theme parks and entertainment plazas |
With the dimension of L1240 x W78 x H118 (mm), it can illuminate large areas |
Each Red, Green, Blue and Warm White LED has a color depth of 256 shades. The Warm White LED can be mixed with the other colors to provide a cooler white. |
Includes mounting brackets that can rotate for easy installation and color wash angle. |
180° rotary angle makes directing light to the right angle |
25° degrees lens for accurate color washing |
RGBW color-changing modes operating through our DMX controller |
IP65 rated, applicable for outdoor and indoor applications |
High quality Epistar LEDs used, ensuring a long life span of over 40,000 hours |
Input Voltage | 120V~240VAC |
Size | L 1240 x W 78 x H 118mm (48.81″ x 3.07″ x 4.64″) |
Body | Extruded Aluminium/6063 |
LED Qty | 48 pcs power LED/1W (4 in 1 chip) |
Color | R-12, G-12, B-12, W/WW-12 |
Working Volt | 24VDC Driver |
Power Consumption | 52W (Max.) |
LEDs | 25° (4 in 1) |
Operation Temp. | -20°C~40°C (-4°F~104°F) |
Work Environment | IP65 (applicable for dry, wet, damp environment) |
DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting. Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 5 channels 256 shades of brightness.
DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures. Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.
H-2102B(W) is the water resistant standard DMX512 compliant control interface, allows you to set DMX address via digital numeric display. Compatible with DMX Master HUEDA™.
Wireless DMX 3-pin XLR Female connector- Receiver. LC-512x-F works with H-DMX2108A-5M-3 and receives signal from LC-512x-M.
Wireless DMX 3-pin XLR Male connector- Transceiver. LC-512x-M works with H-DMX2108A-5M-3 and transmits signal to LC-512x-F.
There are no reviews yet.
Reviews
There are no reviews yet.