1-800-387-4081
The LED Color Decoder LT-995 DMX Zone Controller is a 5 channel low voltage DMX512 Decoder. Required supply voltage 12VDC ~ 24VDC, 6A per channel.
LT-995 DMX must be used in conjunction with a master controller (Such as a HUEDA™) to control low voltage RGB and RGBW LED lighting strips and modules.
Multiple runs can be coordinated to work together in perfect synchronicity or be configured in zones, when used with other DMX decoders.
5 Channel LED DMX Decoder & Zone Controller uses universal standard DMX512.
Uses 5 channels 256 shades of brightness per channel. Indoor use only.
LT-995 DMX Decoder Features
| 5 output channels, Max 6A per channel. Up to 720W output |
| Easy operation with digital display and touch buttons |
| 3-pin XLR, Rj45 and green terminal DMX interfaces |
| With RDM remote management protocol, the operations can be completed via RDM master console such as parameters browsing and setting, DMX address setting and equipment recognition |
| Short circuit, Over temperature and Over current protection |
| Optional High/Low PWM frequency |
| Optional 16 bit (65536 levels) / 8 bit (256 levels) grey level |
Product Description
The LED Color Decoder LT-995 DMX Zone Controller is a 5 channel low voltage DMX512 Decoder. Required supply voltage 12VDC ~ 24VDC, 6A per channel.
LT-995 DMX must be used in conjunction with a master controller (Such as a HUEDA™) to control low voltage RGB and RGBW LED lighting strips and modules.
Multiple runs can be coordinated to work together in perfect synchronicity or be configured in zones, when used with other DMX decoders.
5 Channel LED DMX Decoder & Zone Controller uses universal standard DMX512.
Uses 5 channels 256 shades of brightness per channel. Indoor use only.
LT-995 DMX Decoder Features
| 5 output channels, Max 6A per channel. Up to 720W output |
| Easy operation with digital display and touch buttons |
| 3-pin XLR, Rj45 and green terminal DMX interfaces |
| With RDM remote management protocol, the operations can be completed via RDM master console such as parameters browsing and setting, DMX address setting and equipment recognition |
| Short circuit, Over temperature and Over current protection |
| Optional High/Low PWM frequency |
| Optional 16 bit (65536 levels) / 8 bit (256 levels) grey level |
Technical Specifications
| Supply voltage | 12V – 24V DC Regulated Class 2 |
| Max Current Load | 6A x 5CH (Max. 30A) |
| Max Output Power | (0~72W…144W) x 5CH |
| Photoelectric Isolation | Yes |
| Grey Level | 8 bit (256 levels) / 16 bit (65536 levels) |
| Protection | Short circuit/ Over temperature / Over current protection, Automatic recovery |
| Output DMX Channel | 5 CH/RDM |
| DMX512 Socket | XLR-3, RJ45, Green Terminal |
| Dimension | L 169mm x W 80mm x H 39mm (6.65” x 3.14” x 1.53”) |
| Operating temperature | -30°C ~ 50°C (-22°F ~ 122°F) |
12VDC Power Supplies
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 LED Power Supply YHY-12005000
| Max Continuous Load | 60 W (48 W continuous) |
| Voltage | 12 VDC Output / 100~240 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2
| Max Continuous Load | 180W (3 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
24VDC Power Supplies
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Master DMX Controllers
DMX Touch Panel RGB/RGBW LED Master Controller HUEDA LW-2814DMX
HUEDA™ multi-zone DMX Touch Panel Master Color controller features easy to touch and control colors, brightness and color changing speed effects.
DMX Color Master Controller HUEDA™ Hub H-2818WIN
The H-2818WIN HUEDA™ Hub (master) is a Wi-Fi/RF color controller that allows you to control color changing of RGB and RGBW LED Lighting through DMX standard or wireless HUEDA RF color receivers.
Product Accessories
DMX512 Signal Amplifier/Repeater – SR-2100AMP
SR-2100AMP is a DMX512 signal amplifier complies with standard protocol DMX512 (1990). With DMX signal input and DMX signal output, the signal amplifier works with DMX decoder to expand DMX signals in parallel up to 100m (328ft) range.
Wireless DMX Receiver Pen
Wireless DMX 3-pin XLR Female connector- Receiver. LC-512x-F works with H-DMX2108A-5M-3 and receives signal from LC-512x-M.
Wireless DMX Transmitter Pen
Wireless DMX 3-pin XLR Male connector- Transceiver. LC-512x-M works with H-DMX2108A-5M-3 and transmits signal to LC-512x-F.
RGBW 2464 Wire – 16.4ft (5m) length
Low voltage 20 Gauge / Meter cord. Comes in 16.40 feet length. RGBW Power cord with pigtail wires on both ends
Product Description
The LED Color Decoder LT-995 DMX Zone Controller is a 5 channel low voltage DMX512 Decoder. Required supply voltage 12VDC ~ 24VDC, 6A per channel.
LT-995 DMX must be used in conjunction with a master controller (Such as a HUEDA™) to control low voltage RGB and RGBW LED lighting strips and modules.
Multiple runs can be coordinated to work together in perfect synchronicity or be configured in zones, when used with other DMX decoders.
5 Channel LED DMX Decoder & Zone Controller uses universal standard DMX512.
Uses 5 channels 256 shades of brightness per channel. Indoor use only.
LT-995 DMX Decoder Features
| 5 output channels, Max 6A per channel. Up to 720W output |
| Easy operation with digital display and touch buttons |
| 3-pin XLR, Rj45 and green terminal DMX interfaces |
| With RDM remote management protocol, the operations can be completed via RDM master console such as parameters browsing and setting, DMX address setting and equipment recognition |
| Short circuit, Over temperature and Over current protection |
| Optional High/Low PWM frequency |
| Optional 16 bit (65536 levels) / 8 bit (256 levels) grey level |
Technical Specifications
| Supply voltage | 12V – 24V DC Regulated Class 2 |
| Max Current Load | 6A x 5CH (Max. 30A) |
| Max Output Power | (0~72W…144W) x 5CH |
| Photoelectric Isolation | Yes |
| Grey Level | 8 bit (256 levels) / 16 bit (65536 levels) |
| Protection | Short circuit/ Over temperature / Over current protection, Automatic recovery |
| Output DMX Channel | 5 CH/RDM |
| DMX512 Socket | XLR-3, RJ45, Green Terminal |
| Dimension | L 169mm x W 80mm x H 39mm (6.65” x 3.14” x 1.53”) |
| Operating temperature | -30°C ~ 50°C (-22°F ~ 122°F) |
12VDC Power Supplies
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 LED Power Supply YHY-12005000
| Max Continuous Load | 60 W (48 W continuous) |
| Voltage | 12 VDC Output / 100~240 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2
| Max Continuous Load | 180W (3 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
24VDC Power Supplies
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Master DMX Controllers
DMX Touch Panel RGB/RGBW LED Master Controller HUEDA LW-2814DMX
HUEDA™ multi-zone DMX Touch Panel Master Color controller features easy to touch and control colors, brightness and color changing speed effects.
DMX Color Master Controller HUEDA™ Hub H-2818WIN
The H-2818WIN HUEDA™ Hub (master) is a Wi-Fi/RF color controller that allows you to control color changing of RGB and RGBW LED Lighting through DMX standard or wireless HUEDA RF color receivers.
Product Accessories
DMX512 Signal Amplifier/Repeater – SR-2100AMP
SR-2100AMP is a DMX512 signal amplifier complies with standard protocol DMX512 (1990). With DMX signal input and DMX signal output, the signal amplifier works with DMX decoder to expand DMX signals in parallel up to 100m (328ft) range.
Wireless DMX Receiver Pen
Wireless DMX 3-pin XLR Female connector- Receiver. LC-512x-F works with H-DMX2108A-5M-3 and receives signal from LC-512x-M.
Wireless DMX Transmitter Pen
Wireless DMX 3-pin XLR Male connector- Transceiver. LC-512x-M works with H-DMX2108A-5M-3 and transmits signal to LC-512x-F.
RGBW 2464 Wire – 16.4ft (5m) length
Low voltage 20 Gauge / Meter cord. Comes in 16.40 feet length. RGBW Power cord with pigtail wires on both ends
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.