1-800-387-4081
New LED Grow Strip™ II with clear Nano coating that protects the LED in damp and wet environments but allows the full optimized LED light Spectrum through with minimal light loss. The flexible Grow light strip is ideal for use in horticulture applications where lighting can be precisely directed for optimal plant growth and is ideal for Micro greens and seedling (plants under 12″).
The Super Bright LED Grow Strip™ features LED technology that has an optimized light spectrum for plant (4 to 1 ratio of Deep Red to Blue ). The Grow Strip™ can be used for all stages of plant growth, especially the vegetative and seedling stage. LED Grow Strip™ can be used as a primary lighting or as a supplemental lighting source or supplemental lighting in dark areas in an indoor grow room environment. The strip comes in 24VDC and produces very little added heat, reducing the cost of cooling. This saves energy over standard Non LED lighting solutions and reduces cost of operations in indoor grow operations.
With conventional indoor lighting such compact fluorescent and LED, the rigid light fixture is on the top of the plant projecting the lighting down onto the plant with great light loss and light efficiency at the side and bottom of the plant. However with the LED Grow Strip™ can shape around a plant to deliver lighting in all areas with the optional Bendable Channel and Linear adjustable Channel system. The strip can be cut at marked intervals and shaped to create different grow structures for side lighting plant material. This delivers maximum power and precise lighting to areas that are difficult to reach with traditional light fixture.
24V Triple Bright LED Grow Light roll comes in 2pcs of 2.5 meter (8.2 feet) long strip.
Note: This product requires an optional Class 2 regulated Power Supply (not included). See Accessory tab for optional drivers
Click here to get more information about LED horticulture lights from our grow speciality website.
Trademark Notice: LED Grow Strip™ is a registered Trademark of LED World Inc.
Features & Benefits
| Ideal for Micro greens and seedling. |
| Shapes and bends to plant with optimized light spectrum. Use optional channel system for custom shapes. |
| Low power consumption and little heat generated |
| 24VDC operation, reduces hazards, UL/CSA Standards, ETL listed (indoor use only). |
| LED Grow Strip™ seamlessly operates independently or alongside other lighting |
| Can be cut to length at marked intervals for custom shapes and sizes |
| Spectrum Optimized LED Strip Light : 450-475nm (blue) and 625-660nm (deep red) wavelengths 4 to 1 |
| IP64 rated for use in damp locations, indoor use. |
Why LED Grow Strips™ are better for plants!
Comparison of Conventional Lighting and LED Grow Strip
LED Grow Strip™ light optimizes light output by not outputting the Green color range which plants little use for their growth. This saves unused Light Energy compared to other traditional indoor lighting used for plant growth.
Optional Channel for LED Grow Strip™
Optional bendable channel for light direction
Product Description
New LED Grow Strip™ II with clear Nano coating that protects the LED in damp and wet environments but allows the full optimized LED light Spectrum through with minimal light loss. The flexible Grow light strip is ideal for use in horticulture applications where lighting can be precisely directed for optimal plant growth and is ideal for Micro greens and seedling (plants under 12″).
The Super Bright LED Grow Strip™ features LED technology that has an optimized light spectrum for plant (4 to 1 ratio of Deep Red to Blue ). The Grow Strip™ can be used for all stages of plant growth, especially the vegetative and seedling stage. LED Grow Strip™ can be used as a primary lighting or as a supplemental lighting source or supplemental lighting in dark areas in an indoor grow room environment. The strip comes in 24VDC and produces very little added heat, reducing the cost of cooling. This saves energy over standard Non LED lighting solutions and reduces cost of operations in indoor grow operations.
With conventional indoor lighting such compact fluorescent and LED, the rigid light fixture is on the top of the plant projecting the lighting down onto the plant with great light loss and light efficiency at the side and bottom of the plant. However with the LED Grow Strip™ can shape around a plant to deliver lighting in all areas with the optional Bendable Channel and Linear adjustable Channel system. The strip can be cut at marked intervals and shaped to create different grow structures for side lighting plant material. This delivers maximum power and precise lighting to areas that are difficult to reach with traditional light fixture.
24V Triple Bright LED Grow Light roll comes in 2pcs of 2.5 meter (8.2 feet) long strip.
Note: This product requires an optional Class 2 regulated Power Supply (not included). See Accessory tab for optional drivers
Click here to get more information about LED horticulture lights from our grow speciality website.
Trademark Notice: LED Grow Strip™ is a registered Trademark of LED World Inc.
Features & Benefits
| Ideal for Micro greens and seedling. |
| Shapes and bends to plant with optimized light spectrum. Use optional channel system for custom shapes. |
| Low power consumption and little heat generated |
| 24VDC operation, reduces hazards, UL/CSA Standards, ETL listed (indoor use only). |
| LED Grow Strip™ seamlessly operates independently or alongside other lighting |
| Can be cut to length at marked intervals for custom shapes and sizes |
| Spectrum Optimized LED Strip Light : 450-475nm (blue) and 625-660nm (deep red) wavelengths 4 to 1 |
| IP64 rated for use in damp locations, indoor use. |
Why LED Grow Strips™ are better for plants!
Comparison of Conventional Lighting and LED Grow Strip
LED Grow Strip™ light optimizes light output by not outputting the Green color range which plants little use for their growth. This saves unused Light Energy compared to other traditional indoor lighting used for plant growth.
Optional Channel for LED Grow Strip™
Optional bendable channel for light direction
Technical Specifications
| Roll Size | 2 pcs of 2.5 meter (8.2ft) Grow strip |
| Max Voltage | 24 VDC (regulated) |
| Watt foot | 3.7 Watts |
| Light Source | 60pcs/meter (39.37″) 2835 SMD RRRB LED |
| Dimensions | 5000(L) x 10(W) x 1(H)mm (16.4′ x 0.39″ x 0.039″) |
| Max Length | 5 Meters (16.4 feet) |
| LED Angle | 120° |
| Max Current | 0.54 Amps/Meter |
| Bend Radius | 4 inches (100mm) Max. one flat plane |
| Lamp Life | >25,000 hours estimated average* |
| IP Rating | IP64 Water Resistant |
| Mount | Smooth Clean Surface – burrows free |
| Operating Environment | -25°C ~ +40°C (-13°F ~ +104°F) |
Power Supplies
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Product Description
New LED Grow Strip™ II with clear Nano coating that protects the LED in damp and wet environments but allows the full optimized LED light Spectrum through with minimal light loss. The flexible Grow light strip is ideal for use in horticulture applications where lighting can be precisely directed for optimal plant growth and is ideal for Micro greens and seedling (plants under 12″).
The Super Bright LED Grow Strip™ features LED technology that has an optimized light spectrum for plant (4 to 1 ratio of Deep Red to Blue ). The Grow Strip™ can be used for all stages of plant growth, especially the vegetative and seedling stage. LED Grow Strip™ can be used as a primary lighting or as a supplemental lighting source or supplemental lighting in dark areas in an indoor grow room environment. The strip comes in 24VDC and produces very little added heat, reducing the cost of cooling. This saves energy over standard Non LED lighting solutions and reduces cost of operations in indoor grow operations.
With conventional indoor lighting such compact fluorescent and LED, the rigid light fixture is on the top of the plant projecting the lighting down onto the plant with great light loss and light efficiency at the side and bottom of the plant. However with the LED Grow Strip™ can shape around a plant to deliver lighting in all areas with the optional Bendable Channel and Linear adjustable Channel system. The strip can be cut at marked intervals and shaped to create different grow structures for side lighting plant material. This delivers maximum power and precise lighting to areas that are difficult to reach with traditional light fixture.
24V Triple Bright LED Grow Light roll comes in 2pcs of 2.5 meter (8.2 feet) long strip.
Note: This product requires an optional Class 2 regulated Power Supply (not included). See Accessory tab for optional drivers
Click here to get more information about LED horticulture lights from our grow speciality website.
Trademark Notice: LED Grow Strip™ is a registered Trademark of LED World Inc.
Features & Benefits
| Ideal for Micro greens and seedling. |
| Shapes and bends to plant with optimized light spectrum. Use optional channel system for custom shapes. |
| Low power consumption and little heat generated |
| 24VDC operation, reduces hazards, UL/CSA Standards, ETL listed (indoor use only). |
| LED Grow Strip™ seamlessly operates independently or alongside other lighting |
| Can be cut to length at marked intervals for custom shapes and sizes |
| Spectrum Optimized LED Strip Light : 450-475nm (blue) and 625-660nm (deep red) wavelengths 4 to 1 |
| IP64 rated for use in damp locations, indoor use. |
Why LED Grow Strips™ are better for plants!
Comparison of Conventional Lighting and LED Grow Strip
LED Grow Strip™ light optimizes light output by not outputting the Green color range which plants little use for their growth. This saves unused Light Energy compared to other traditional indoor lighting used for plant growth.
Optional Channel for LED Grow Strip™
Optional bendable channel for light direction
Technical Specifications
| Roll Size | 2 pcs of 2.5 meter (8.2ft) Grow strip |
| Max Voltage | 24 VDC (regulated) |
| Watt foot | 3.7 Watts |
| Light Source | 60pcs/meter (39.37″) 2835 SMD RRRB LED |
| Dimensions | 5000(L) x 10(W) x 1(H)mm (16.4′ x 0.39″ x 0.039″) |
| Max Length | 5 Meters (16.4 feet) |
| LED Angle | 120° |
| Max Current | 0.54 Amps/Meter |
| Bend Radius | 4 inches (100mm) Max. one flat plane |
| Lamp Life | >25,000 hours estimated average* |
| IP Rating | IP64 Water Resistant |
| Mount | Smooth Clean Surface – burrows free |
| Operating Environment | -25°C ~ +40°C (-13°F ~ +104°F) |
Power Supplies
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.