Your cart is currently empty!
Deep Red LED Grow Strip and Blue Grow LED have a Nano-meter wavelength. LED Grow Strip is ideal for a specific range Laboratory growth. Red comes in 660nm and Blue in 450-460nm wavelength. The LED Grow Strip allows for specific Spectrum with minimal light loss while combining the Blue and Red.
LED World’s optional Bendable Channel and Linear adjustable Channel system used for ease of installation. Cut LED Grow strip at marked intervals and shape to create different grow structures. Thus delivers maximum power and precise lighting to areas that are difficult to reach with traditional light fixture.
Moreover, LED Grow strips™ come with lead wires to enable easy connection to the Class 2 LED Power supply. Easily mountable into LED World’s Aluminium Channel profiles. Hence, Its small size and low voltage makes this lighting ideal for a wide range of grow applications. Cut to size by at each 6 LED (24VDC) intervals at marking points for custom length lighting.
The strip comes in 24VDC and produces very little added heat, reducing the cost of cooling. This saves energy over standard HPS lighting solutions and reduces cost of operations in indoor grow operations.
24V Triple Bright LED Grow Light roll comes in 16.4ft (5 meters) length.
Note: This product requires an optional Class 2 regulated Power Supply (not included). See Accessory tab for optional drivers.
Trademark Notice: LED Grow Strip™ is a registered Trademark of LED World Inc.
| Shapes and bends to plant with optimized light spectrum. Use optional channel system for custom shapes |
| Low power consumption and little heat generated |
| 24VDC operation, reduces hazards, UL/CSA Standards, ETL listed (indoor use only). |
| LED Grow Strip™ seamlessly operates independently or alongside other lighting |
| Can be cut to length at marked intervals for custom shapes and sizes |
| IP22 rated for indoor use. |
Grow Strip spectrum graph
| Watts | 4.4 watts/ft |
| Length | 16.4 feet (5 meters) |
| Wavelength | 660nm(Red), 450-460(Blue) |
| IP Rating | IP22 Indoor Type A |
$94.75
Deep Red LED Grow Strip and Blue Grow LED have a Nano-meter wavelength. LED Grow Strip is ideal for a specific range Laboratory growth. Red comes in 660nm and Blue in 450-460nm wavelength. The LED Grow Strip allows for specific Spectrum with minimal light loss while combining the Blue and Red.
LED World’s optional Bendable Channel and Linear adjustable Channel system used for ease of installation. Cut LED Grow strip at marked intervals and shape to create different grow structures. Thus delivers maximum power and precise lighting to areas that are difficult to reach with traditional light fixture.
Moreover, LED Grow strips™ come with lead wires to enable easy connection to the Class 2 LED Power supply. Easily mountable into LED World’s Aluminium Channel profiles. Hence, Its small size and low voltage makes this lighting ideal for a wide range of grow applications. Cut to size by at each 6 LED (24VDC) intervals at marking points for custom length lighting.
The strip comes in 24VDC and produces very little added heat, reducing the cost of cooling. This saves energy over standard HPS lighting solutions and reduces cost of operations in indoor grow operations.
24V Triple Bright LED Grow Light roll comes in 16.4ft (5 meters) length.
Note: This product requires an optional Class 2 regulated Power Supply (not included). See Accessory tab for optional drivers.
Trademark Notice: LED Grow Strip™ is a registered Trademark of LED World Inc.
| Shapes and bends to plant with optimized light spectrum. Use optional channel system for custom shapes |
| Low power consumption and little heat generated |
| 24VDC operation, reduces hazards, UL/CSA Standards, ETL listed (indoor use only). |
| LED Grow Strip™ seamlessly operates independently or alongside other lighting |
| Can be cut to length at marked intervals for custom shapes and sizes |
| IP22 rated for indoor use. |
Grow Strip spectrum graph
| Roll Size | 5 Meters (16.4 Feet) |
| Max Voltage | 24 VDC (Regulated/Class 2) |
| Watts/foot | 4.4 Watts |
| AMPs/Roll | 3A |
| Max Current/Ft | 185mA |
| Light Source | 60pcs/meter (39.37″) 5050 SMD LED |
| Dimensions | 5000(L) x 10(W) x 2.5(H)mm (16.4′ x 25/64″ x 3/32″) |
| LEDs Type | 5050 SMD LED |
| LED Angle | 120° |
| Brightness | 396-418 Lumens / ft (30.5cm) |
| Bend Radius | 4″(100mm) Max, one flat plane |
| Lamp Life | >25,000 hours estimated average* |
| Mount | Smooth Surface/burrows free |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ 140°F) |
| Max Continuous Load | 96 W |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 60 W |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 30 W |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 192W (2 Tap x 96W) |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 288W (3 Tap x 96W) |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 90 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3.75A |
S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
Reviews
There are no reviews yet.