1-800-387-4081
12VDC Multi-bend LED Flex Strip is an angle bendable LED Strip for custom shape lighting applications. Unlike standard LED Strips, Multi-bend LED Flex Strip can bend on two Axis allowing shaping to non-linear surfaces. Moreover, the strips features the new high power 2835 SMD LED (50% brighter than the 3528 SMD LED). It has a high lumen output of 1 watt to 100 lumens. Cut-able low voltage (12VDC) LED strip at marked intervals (3 LED intervals at indicated cutting points). It is suitable for dry locations use. LED Flex Strip Lighting has a 3M tape backing for easy installation. In addition, it is easily mountable onto most flat, clean dry surfaces free of burrows. All of our Flex Strips come with lead wires to make a hard-wired connection with our Class 2 power supply.
Size of roll and maximum length: 5 meter (16.4 feet) roll
Ideal LED Strip for applications such as sign letter lighting, architectural lighting, perimeter lighting and many more. Moreover, Its small size and low voltage makes this lighting ideal for a wide range of applications.
Multi-bend LED Strip available in Red and Blue Color.
Note: This product requires an optional Class 2 Power Supply (not included).
Features
| Angle bendable for custom shape lighting |
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat produced |
| Flexible LED light strips |
| Long life of high output LEDs |
| No RF interference |
| Solid state lighting |
| Super Bright 2835 SMD LEDs |
Product Description
12VDC Multi-bend LED Flex Strip is an angle bendable LED Strip for custom shape lighting applications. Unlike standard LED Strips, Multi-bend LED Flex Strip can bend on two Axis allowing shaping to non-linear surfaces. Moreover, the strips features the new high power 2835 SMD LED (50% brighter than the 3528 SMD LED). It has a high lumen output of 1 watt to 100 lumens. Cut-able low voltage (12VDC) LED strip at marked intervals (3 LED intervals at indicated cutting points). It is suitable for dry locations use. LED Flex Strip Lighting has a 3M tape backing for easy installation. In addition, it is easily mountable onto most flat, clean dry surfaces free of burrows. All of our Flex Strips come with lead wires to make a hard-wired connection with our Class 2 power supply.
Size of roll and maximum length: 5 meter (16.4 feet) roll
Ideal LED Strip for applications such as sign letter lighting, architectural lighting, perimeter lighting and many more. Moreover, Its small size and low voltage makes this lighting ideal for a wide range of applications.
Multi-bend LED Strip available in Red and Blue Color.
Note: This product requires an optional Class 2 Power Supply (not included).
Features
| Angle bendable for custom shape lighting |
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat produced |
| Flexible LED light strips |
| Long life of high output LEDs |
| No RF interference |
| Solid state lighting |
| Super Bright 2835 SMD LEDs |
Technical Specifications
| Watt foot | 1.8 W/ft |
| Max Voltage | 12 VDC (regulated) |
| AMPs/Roll | 2.5 Amps |
| Brightness | 200-220 Lumens / ft |
| Roll Size | 5 Meters (16.4 feet) |
| Max Current/Ft | 180~185mA |
| Light Source | 60pcs/meter (39.37″) 2835 SMD LED |
| Dimensions (8mm wide) | 5000(L) x 8(W) x 1(H)mm (16.4′ x 0.31″ x 0.03″) |
| Max Length | 5 Meters (16.4 feet) |
| LED Angle | 120° |
| Lamp Life | >25,000 hours estimated average* |
| IP Rating | IP20 type A |
| Mount | Smooth Clean Surface – burrows free |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ +104°F) |
Dimmable LED Drivers
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2
| Max Continuous Load | 180W (3 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
Product Description
12VDC Multi-bend LED Flex Strip is an angle bendable LED Strip for custom shape lighting applications. Unlike standard LED Strips, Multi-bend LED Flex Strip can bend on two Axis allowing shaping to non-linear surfaces. Moreover, the strips features the new high power 2835 SMD LED (50% brighter than the 3528 SMD LED). It has a high lumen output of 1 watt to 100 lumens. Cut-able low voltage (12VDC) LED strip at marked intervals (3 LED intervals at indicated cutting points). It is suitable for dry locations use. LED Flex Strip Lighting has a 3M tape backing for easy installation. In addition, it is easily mountable onto most flat, clean dry surfaces free of burrows. All of our Flex Strips come with lead wires to make a hard-wired connection with our Class 2 power supply.
Size of roll and maximum length: 5 meter (16.4 feet) roll
Ideal LED Strip for applications such as sign letter lighting, architectural lighting, perimeter lighting and many more. Moreover, Its small size and low voltage makes this lighting ideal for a wide range of applications.
Multi-bend LED Strip available in Red and Blue Color.
Note: This product requires an optional Class 2 Power Supply (not included).
Features
| Angle bendable for custom shape lighting |
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat produced |
| Flexible LED light strips |
| Long life of high output LEDs |
| No RF interference |
| Solid state lighting |
| Super Bright 2835 SMD LEDs |
Technical Specifications
| Watt foot | 1.8 W/ft |
| Max Voltage | 12 VDC (regulated) |
| AMPs/Roll | 2.5 Amps |
| Brightness | 200-220 Lumens / ft |
| Roll Size | 5 Meters (16.4 feet) |
| Max Current/Ft | 180~185mA |
| Light Source | 60pcs/meter (39.37″) 2835 SMD LED |
| Dimensions (8mm wide) | 5000(L) x 8(W) x 1(H)mm (16.4′ x 0.31″ x 0.03″) |
| Max Length | 5 Meters (16.4 feet) |
| LED Angle | 120° |
| Lamp Life | >25,000 hours estimated average* |
| IP Rating | IP20 type A |
| Mount | Smooth Clean Surface – burrows free |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ +104°F) |
Dimmable LED Drivers
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2
| Max Continuous Load | 180W (3 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.