1-800-387-4081
New Dim to Deep Warm White EvenBright LED Flex Strip adjusts Color Temperature upon dimming (No Controllers required). Requires a PWM dimmable power supply. Smooth dimming transition between two warm white color temperatures with one dimmer. 3000K at full brightness then adjustable up to optional 2500K or 1800K based on strip selection via PWM dimming (mimics the tungsten lighting). EvenBright™ strip packs 68 2016 SMD LEDs per foot. It allows a very even and bright light (unlike the older 5050 SMD LEDs caused spotting). In addition, The Quattro Bright series 24VDC LED strip features a high powered 2016 LED. Features coloring rendering index (CRI) of 90 or better (100 is best).
Type A Flex Strip is suitable for dry locations use and comes in 5 meters long (16.4 feet) long rolls. Ideal lighting where LED dots are not wanted to be seen when mounted in the optional Aluminum Profile.
Note: Use only with our Multi-Dim Drivers featuring PWM dimming capability. See Power Supplies section.
EvenBright CCT Dimmable LED Flex Strip is used for applications such as architectural lighting, Restaurants, Cabinet lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation. Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply.
The 10mm (3/8”) wide LED Strip can be easily mounted into LED World’s Aluminum Channel profiles. Hence, Its small size and low voltage makes this lighting ideal for a wide range of applications. Strip can be cut to size by at each 14 LEDs (24VDC) intervals at marking points only.
It is recommended to use EvenBright FA224M20-5M-24V-WW LED Strip with LED World’s Aluminum profiles for better heat dissipation and longer LED life.
Note: Accessories are not included with this product. See accessories tab.
Features
| Dim to Warm White using PWM dimming |
| 3000K at full brightness then dim down to a optional 2500K or 1800K warmer white |
| Choose the perfect shade of warm white light by turning a dimmer switch. |
| Double sided 3M tape backing, UL recognized PCBs |
| Ultra bright surface mount LEDs |
| CRI 90 or better |
| Epistar super bright LEDs, perfect color consistency |
| Smooth dimming transition between two warm white color temperatures with one dimmer |
| Even lighting, continuous length |
| Can be cut to size at marked intervals (14 LEDs apart) |
Product Video
Product Description
New Dim to Deep Warm White EvenBright LED Flex Strip adjusts Color Temperature upon dimming (No Controllers required). Requires a PWM dimmable power supply. Smooth dimming transition between two warm white color temperatures with one dimmer. 3000K at full brightness then adjustable up to optional 2500K or 1800K based on strip selection via PWM dimming (mimics the tungsten lighting). EvenBright™ strip packs 68 2016 SMD LEDs per foot. It allows a very even and bright light (unlike the older 5050 SMD LEDs caused spotting). In addition, The Quattro Bright series 24VDC LED strip features a high powered 2016 LED. Features coloring rendering index (CRI) of 90 or better (100 is best).
Type A Flex Strip is suitable for dry locations use and comes in 5 meters long (16.4 feet) long rolls. Ideal lighting where LED dots are not wanted to be seen when mounted in the optional Aluminum Profile.
Note: Use only with our Multi-Dim Drivers featuring PWM dimming capability. See Power Supplies section.
EvenBright CCT Dimmable LED Flex Strip is used for applications such as architectural lighting, Restaurants, Cabinet lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation. Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply.
The 10mm (3/8”) wide LED Strip can be easily mounted into LED World’s Aluminum Channel profiles. Hence, Its small size and low voltage makes this lighting ideal for a wide range of applications. Strip can be cut to size by at each 14 LEDs (24VDC) intervals at marking points only.
It is recommended to use EvenBright FA224M20-5M-24V-WW LED Strip with LED World’s Aluminum profiles for better heat dissipation and longer LED life.
Note: Accessories are not included with this product. See accessories tab.
Features
| Dim to Warm White using PWM dimming |
| 3000K at full brightness then dim down to a optional 2500K or 1800K warmer white |
| Choose the perfect shade of warm white light by turning a dimmer switch. |
| Double sided 3M tape backing, UL recognized PCBs |
| Ultra bright surface mount LEDs |
| CRI 90 or better |
| Epistar super bright LEDs, perfect color consistency |
| Smooth dimming transition between two warm white color temperatures with one dimmer |
| Even lighting, continuous length |
| Can be cut to size at marked intervals (14 LEDs apart) |
Product Video
Technical Specifications
| Watts/foot | 5.5 W/ft |
| Max Voltage | 24 VDC (Regulated/Class 2) |
| Amps/Roll | 3.75 |
| Brightness | 530-550 Lumens / ft (30.5cm) |
| Roll Size | 5 Meters (16.4 Feet) |
| Light Source | 224pcs/meter (39.37″) 2016 SMD LED |
| Dimensions | 5000(L) x 12(W) x 1.0(H)mm (16.4′ x 0.47″ x 3/100″) |
| LEDs Type | 2016 SMD LED |
| CRI | >90 |
| LED Angle | 120° |
| Bend Radius | 4″(100mm) Max, one flat plane |
| Lamp Life | >30,000 hours estimated average* |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ 104°F) |
Dimmable LED Drivers
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Product Description
New Dim to Deep Warm White EvenBright LED Flex Strip adjusts Color Temperature upon dimming (No Controllers required). Requires a PWM dimmable power supply. Smooth dimming transition between two warm white color temperatures with one dimmer. 3000K at full brightness then adjustable up to optional 2500K or 1800K based on strip selection via PWM dimming (mimics the tungsten lighting). EvenBright™ strip packs 68 2016 SMD LEDs per foot. It allows a very even and bright light (unlike the older 5050 SMD LEDs caused spotting). In addition, The Quattro Bright series 24VDC LED strip features a high powered 2016 LED. Features coloring rendering index (CRI) of 90 or better (100 is best).
Type A Flex Strip is suitable for dry locations use and comes in 5 meters long (16.4 feet) long rolls. Ideal lighting where LED dots are not wanted to be seen when mounted in the optional Aluminum Profile.
Note: Use only with our Multi-Dim Drivers featuring PWM dimming capability. See Power Supplies section.
EvenBright CCT Dimmable LED Flex Strip is used for applications such as architectural lighting, Restaurants, Cabinet lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation. Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply.
The 10mm (3/8”) wide LED Strip can be easily mounted into LED World’s Aluminum Channel profiles. Hence, Its small size and low voltage makes this lighting ideal for a wide range of applications. Strip can be cut to size by at each 14 LEDs (24VDC) intervals at marking points only.
It is recommended to use EvenBright FA224M20-5M-24V-WW LED Strip with LED World’s Aluminum profiles for better heat dissipation and longer LED life.
Note: Accessories are not included with this product. See accessories tab.
Features
| Dim to Warm White using PWM dimming |
| 3000K at full brightness then dim down to a optional 2500K or 1800K warmer white |
| Choose the perfect shade of warm white light by turning a dimmer switch. |
| Double sided 3M tape backing, UL recognized PCBs |
| Ultra bright surface mount LEDs |
| CRI 90 or better |
| Epistar super bright LEDs, perfect color consistency |
| Smooth dimming transition between two warm white color temperatures with one dimmer |
| Even lighting, continuous length |
| Can be cut to size at marked intervals (14 LEDs apart) |
Product Video
Technical Specifications
| Watts/foot | 5.5 W/ft |
| Max Voltage | 24 VDC (Regulated/Class 2) |
| Amps/Roll | 3.75 |
| Brightness | 530-550 Lumens / ft (30.5cm) |
| Roll Size | 5 Meters (16.4 Feet) |
| Light Source | 224pcs/meter (39.37″) 2016 SMD LED |
| Dimensions | 5000(L) x 12(W) x 1.0(H)mm (16.4′ x 0.47″ x 3/100″) |
| LEDs Type | 2016 SMD LED |
| CRI | >90 |
| LED Angle | 120° |
| Bend Radius | 4″(100mm) Max, one flat plane |
| Lamp Life | >30,000 hours estimated average* |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ 104°F) |
Dimmable LED Drivers
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.