1-800-387-4081
The new High Efficiency Quattro Bright Constant Current IC Regulated LED Strip light features color consistency on long runs. The LED Strip HH-S2835X-120-24V-C features high bright 2835 LEDs for a light output exceeding 540lm per foot lumens and even light output. High a coloring rendering index (CRI) of 90 or better. High CRI means better color definition.
LED Strip requires a constant voltage 24VDC (optional) LED Driver and can be dimmable with a one of LED World’s Dimmable Class 2 LED Driver. Each interval section on the LED Strip has a IC chip to regulate the current allowing for long runs of the strip without voltage drops. The 5.5 watts per foot, is a high output lumen LED strip with even light output. The Type A (indoor rated) Flex Strip comes in 5 meters long (16.4 feet) roll. Ideal for LED lighting in cove applications where longer runs of lighting are needed.
With Constant Current IC for each section, there is no need for constant current driver. IC Regulated LED Strip HH-S2835X-120-24V-C works with Standard Class 2 DC24V constant voltage power supply. In addition. it also compatible with Dimmable LED Drivers. The LED Strip IC will convert 24VDC to CC (Constant Current) for the LEDs. The CC Strip can be cut like Standard Constant voltage strips.
LED Flex Strip Lighting has a 3M tape backing for easy installation.
Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The LED Strip can be easily mounted into LED World’s Aluminum Channel profiles.
Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories are not included with this product. See Accessories section.
Features
| Constant Current IC (regulated for long Life of LEDs) |
| High density of LEDs for even light output (36 LEDs/foot) |
| View Angle 120° |
| 5 meters (16.4ft) roll |
| 2835 SMD (Quattro Bright Series) |
| Can be cut to size at marked intervals |
| Flexible LED Light Strips |
| Solid-state, high vibration resistant |
| Dimmable |
| cULus Standard |
Product Description
The new High Efficiency Quattro Bright Constant Current IC Regulated LED Strip light features color consistency on long runs. The LED Strip HH-S2835X-120-24V-C features high bright 2835 LEDs for a light output exceeding 540lm per foot lumens and even light output. High a coloring rendering index (CRI) of 90 or better. High CRI means better color definition.
LED Strip requires a constant voltage 24VDC (optional) LED Driver and can be dimmable with a one of LED World’s Dimmable Class 2 LED Driver. Each interval section on the LED Strip has a IC chip to regulate the current allowing for long runs of the strip without voltage drops. The 5.5 watts per foot, is a high output lumen LED strip with even light output. The Type A (indoor rated) Flex Strip comes in 5 meters long (16.4 feet) roll. Ideal for LED lighting in cove applications where longer runs of lighting are needed.
With Constant Current IC for each section, there is no need for constant current driver. IC Regulated LED Strip HH-S2835X-120-24V-C works with Standard Class 2 DC24V constant voltage power supply. In addition. it also compatible with Dimmable LED Drivers. The LED Strip IC will convert 24VDC to CC (Constant Current) for the LEDs. The CC Strip can be cut like Standard Constant voltage strips.
LED Flex Strip Lighting has a 3M tape backing for easy installation.
Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The LED Strip can be easily mounted into LED World’s Aluminum Channel profiles.
Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories are not included with this product. See Accessories section.
Features
| Constant Current IC (regulated for long Life of LEDs) |
| High density of LEDs for even light output (36 LEDs/foot) |
| View Angle 120° |
| 5 meters (16.4ft) roll |
| 2835 SMD (Quattro Bright Series) |
| Can be cut to size at marked intervals |
| Flexible LED Light Strips |
| Solid-state, high vibration resistant |
| Dimmable |
| cULus Standard |
Technical Specifications
| Max Voltage | 24 VDC (Class 2 Type power) |
| Watts/foot | 5.5 Watts |
| Amps/Roll | 3.6 Amps |
| Brightness | 540 Lumens / ft (30.5 cm) |
| Color Temp. | 3200K(Warm White), 4200K(Neutral White), 5500K (Pure White) |
| Light Source | 120pcs/meter (39.37″) 2835 LED |
| Dimensions | 5000(L) x 10(W) x 1.2(H)mm (16.4′ x 3/8″ x 0.04″) |
| LEDs Type | 2835 SMD LED |
| Max Length | 5 meters (16.4 feet) |
| LED Angle | 120° |
| Bend Radius | Max 100mm (4″) |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Lamp Life | >35,000 hours estimated average* |
| IP Rating | IP20 Type A |
Dimmable LED Drivers
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
2 Pin Strip to Power Clear Connectors – BCI10XB-2W
BCI10XB-2W clear connector makes it easy to connect single color 10mm wide LED strip to power in a narrow space. Connector length is 6.29″ (160mm). Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Strip Clear Connectors – BCI10BB-2
BCI10BB-2 Clear connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Power Clamp Connector – CL10XB-2G
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
2 Pin Strip to Strip Clamp Connector – CL10BB-2G
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Single Color Strip T Connector – S10-T2A
S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Product Description
The new High Efficiency Quattro Bright Constant Current IC Regulated LED Strip light features color consistency on long runs. The LED Strip HH-S2835X-120-24V-C features high bright 2835 LEDs for a light output exceeding 540lm per foot lumens and even light output. High a coloring rendering index (CRI) of 90 or better. High CRI means better color definition.
LED Strip requires a constant voltage 24VDC (optional) LED Driver and can be dimmable with a one of LED World’s Dimmable Class 2 LED Driver. Each interval section on the LED Strip has a IC chip to regulate the current allowing for long runs of the strip without voltage drops. The 5.5 watts per foot, is a high output lumen LED strip with even light output. The Type A (indoor rated) Flex Strip comes in 5 meters long (16.4 feet) roll. Ideal for LED lighting in cove applications where longer runs of lighting are needed.
With Constant Current IC for each section, there is no need for constant current driver. IC Regulated LED Strip HH-S2835X-120-24V-C works with Standard Class 2 DC24V constant voltage power supply. In addition. it also compatible with Dimmable LED Drivers. The LED Strip IC will convert 24VDC to CC (Constant Current) for the LEDs. The CC Strip can be cut like Standard Constant voltage strips.
LED Flex Strip Lighting has a 3M tape backing for easy installation.
Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The LED Strip can be easily mounted into LED World’s Aluminum Channel profiles.
Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories are not included with this product. See Accessories section.
Features
| Constant Current IC (regulated for long Life of LEDs) |
| High density of LEDs for even light output (36 LEDs/foot) |
| View Angle 120° |
| 5 meters (16.4ft) roll |
| 2835 SMD (Quattro Bright Series) |
| Can be cut to size at marked intervals |
| Flexible LED Light Strips |
| Solid-state, high vibration resistant |
| Dimmable |
| cULus Standard |
Technical Specifications
| Max Voltage | 24 VDC (Class 2 Type power) |
| Watts/foot | 5.5 Watts |
| Amps/Roll | 3.6 Amps |
| Brightness | 540 Lumens / ft (30.5 cm) |
| Color Temp. | 3200K(Warm White), 4200K(Neutral White), 5500K (Pure White) |
| Light Source | 120pcs/meter (39.37″) 2835 LED |
| Dimensions | 5000(L) x 10(W) x 1.2(H)mm (16.4′ x 3/8″ x 0.04″) |
| LEDs Type | 2835 SMD LED |
| Max Length | 5 meters (16.4 feet) |
| LED Angle | 120° |
| Bend Radius | Max 100mm (4″) |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Lamp Life | >35,000 hours estimated average* |
| IP Rating | IP20 Type A |
Dimmable LED Drivers
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
2 Pin Strip to Power Clear Connectors – BCI10XB-2W
BCI10XB-2W clear connector makes it easy to connect single color 10mm wide LED strip to power in a narrow space. Connector length is 6.29″ (160mm). Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Strip Clear Connectors – BCI10BB-2
BCI10BB-2 Clear connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Power Clamp Connector – CL10XB-2G
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
2 Pin Strip to Strip Clamp Connector – CL10BB-2G
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Single Color Strip T Connector – S10-T2A
S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.