1-800-387-4081
New Cinco Bright LED Strip is our brightest LED strip that can output up to 900 lumens per foot (30.5cm). It disperse the evenly for a (Evenbright) no spotting lighting when mounted in our Standard LED aluminum channel. Although, It is highly recommended to use LED Cinco Bright LED Strip with LED World’s dimmable LED driver (power source) for applications such as under cabinet lighting as it is a very bright light. One foot of LED Cinco Bright LED Strip is equal to a 60 watt standard in incandescent light bulb.
The 24VDC (low voltage) Cinco Bright LED Strip comes in a flexible ultra-sleek thin white PCB strip. The IC regulated design (Constant Current) allows for better regulation of power and higher light output efficiency of up to 130LM per watt. The Cinco Bright LED Strip works with Standard Class 2 24VDC constant voltage driver (power supply).
Cinco series LED Flex Strip that packs 128 super bright Epistar 5730 SMD LEDs per meter (39.4”). Hence, more even light (unlike the older 5050 SMD LEDs that caused spotting).
The Cinco Bright LED Strip is available in a Deep warm White (2700K), Warm White (3000K), Neutral white (4000K) and Pure white (5000K). Featuring coloring rendering index (CRI) of 80 or better (LM-80 tested). Hence, High CRI means better color definition in Jewelry display cases, food display cabinets and under cabinet lighting.
The Cinco Bright LED Strip comes with special 3M ceramic tape backing for easy installation into Aluminum channel. However, The tape is cut-able to size at each 8 LED intervals at marking points.
The strip must be mounted into LED World’s optional Aluminum Channel profiles for better heat dissipation.
Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories are not included with this product. See Accessories section.
Features
| CINCO Bright. Up to 900 lm/ft strip light |
| 130 LM/W even bright no spot lighting |
| With Constant Current IC for each sections, there is no need of constant current driver |
| View Angle 120° |
| Ceramic Tape backing |
| Ultra bright surface – mount LEDs |
| CRI 80 or better |
| Epistar super bright 5730 SMD LEDs |
| Flexible LED Light Strips, LM-80 tested |
| Can be cut to size at marked intervals (at each 8 LEDs) |
| Dimmable via any 24VDC PWM Control System or Dimmer |
| cULus Standard |
Product Description
New Cinco Bright LED Strip is our brightest LED strip that can output up to 900 lumens per foot (30.5cm). It disperse the evenly for a (Evenbright) no spotting lighting when mounted in our Standard LED aluminum channel. Although, It is highly recommended to use LED Cinco Bright LED Strip with LED World’s dimmable LED driver (power source) for applications such as under cabinet lighting as it is a very bright light. One foot of LED Cinco Bright LED Strip is equal to a 60 watt standard in incandescent light bulb.
The 24VDC (low voltage) Cinco Bright LED Strip comes in a flexible ultra-sleek thin white PCB strip. The IC regulated design (Constant Current) allows for better regulation of power and higher light output efficiency of up to 130LM per watt. The Cinco Bright LED Strip works with Standard Class 2 24VDC constant voltage driver (power supply).
Cinco series LED Flex Strip that packs 128 super bright Epistar 5730 SMD LEDs per meter (39.4”). Hence, more even light (unlike the older 5050 SMD LEDs that caused spotting).
The Cinco Bright LED Strip is available in a Deep warm White (2700K), Warm White (3000K), Neutral white (4000K) and Pure white (5000K). Featuring coloring rendering index (CRI) of 80 or better (LM-80 tested). Hence, High CRI means better color definition in Jewelry display cases, food display cabinets and under cabinet lighting.
The Cinco Bright LED Strip comes with special 3M ceramic tape backing for easy installation into Aluminum channel. However, The tape is cut-able to size at each 8 LED intervals at marking points.
The strip must be mounted into LED World’s optional Aluminum Channel profiles for better heat dissipation.
Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories are not included with this product. See Accessories section.
Features
| CINCO Bright. Up to 900 lm/ft strip light |
| 130 LM/W even bright no spot lighting |
| With Constant Current IC for each sections, there is no need of constant current driver |
| View Angle 120° |
| Ceramic Tape backing |
| Ultra bright surface – mount LEDs |
| CRI 80 or better |
| Epistar super bright 5730 SMD LEDs |
| Flexible LED Light Strips, LM-80 tested |
| Can be cut to size at marked intervals (at each 8 LEDs) |
| Dimmable via any 24VDC PWM Control System or Dimmer |
| cULus Standard |
Technical Specifications
| Max Voltage | 24VDC (Class 2 Type power) |
| Watts/foot | 7 Watts |
| Amps/Roll | 3.8 Amps |
| Light Source | 128 pcs/meter (39.37″) 5630 LED |
| Dimensions | 4000(L) x 10(W) x 1.2(H)mm (13.12′ x 3/8″ x 0.04″) |
| LEDs Type | 5730 Epistar SMD LEDs |
| Max Length | 4 meters (13.12 feet) |
| CRI | >80 |
| LED Angle | 120° |
| Brightness | 900 Lumens / ft (30.5 cm) |
| Bend Radius | Max 100mm (4″) |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Lamp Life | >35,000 hours estimated average* |
| IP Rating | IP22 Type A |
Dimmable LED Drivers
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
2 Pin Strip to Power Clear Connectors – BCI10XB-2W
BCI10XB-2W clear connector makes it easy to connect single color 10mm wide LED strip to power in a narrow space. Connector length is 6.29″ (160mm). Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Strip Clear Connectors – BCI10BB-2
BCI10BB-2 Clear connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Power Clamp Connector – CL10XB-2G
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
2 Pin Strip to Strip Clamp Connector – CL10BB-2G
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Single Color Strip T Connector – S10-T2A
S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Product Description
New Cinco Bright LED Strip is our brightest LED strip that can output up to 900 lumens per foot (30.5cm). It disperse the evenly for a (Evenbright) no spotting lighting when mounted in our Standard LED aluminum channel. Although, It is highly recommended to use LED Cinco Bright LED Strip with LED World’s dimmable LED driver (power source) for applications such as under cabinet lighting as it is a very bright light. One foot of LED Cinco Bright LED Strip is equal to a 60 watt standard in incandescent light bulb.
The 24VDC (low voltage) Cinco Bright LED Strip comes in a flexible ultra-sleek thin white PCB strip. The IC regulated design (Constant Current) allows for better regulation of power and higher light output efficiency of up to 130LM per watt. The Cinco Bright LED Strip works with Standard Class 2 24VDC constant voltage driver (power supply).
Cinco series LED Flex Strip that packs 128 super bright Epistar 5730 SMD LEDs per meter (39.4”). Hence, more even light (unlike the older 5050 SMD LEDs that caused spotting).
The Cinco Bright LED Strip is available in a Deep warm White (2700K), Warm White (3000K), Neutral white (4000K) and Pure white (5000K). Featuring coloring rendering index (CRI) of 80 or better (LM-80 tested). Hence, High CRI means better color definition in Jewelry display cases, food display cabinets and under cabinet lighting.
The Cinco Bright LED Strip comes with special 3M ceramic tape backing for easy installation into Aluminum channel. However, The tape is cut-able to size at each 8 LED intervals at marking points.
The strip must be mounted into LED World’s optional Aluminum Channel profiles for better heat dissipation.
Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories are not included with this product. See Accessories section.
Features
| CINCO Bright. Up to 900 lm/ft strip light |
| 130 LM/W even bright no spot lighting |
| With Constant Current IC for each sections, there is no need of constant current driver |
| View Angle 120° |
| Ceramic Tape backing |
| Ultra bright surface – mount LEDs |
| CRI 80 or better |
| Epistar super bright 5730 SMD LEDs |
| Flexible LED Light Strips, LM-80 tested |
| Can be cut to size at marked intervals (at each 8 LEDs) |
| Dimmable via any 24VDC PWM Control System or Dimmer |
| cULus Standard |
Technical Specifications
| Max Voltage | 24VDC (Class 2 Type power) |
| Watts/foot | 7 Watts |
| Amps/Roll | 3.8 Amps |
| Light Source | 128 pcs/meter (39.37″) 5630 LED |
| Dimensions | 4000(L) x 10(W) x 1.2(H)mm (13.12′ x 3/8″ x 0.04″) |
| LEDs Type | 5730 Epistar SMD LEDs |
| Max Length | 4 meters (13.12 feet) |
| CRI | >80 |
| LED Angle | 120° |
| Brightness | 900 Lumens / ft (30.5 cm) |
| Bend Radius | Max 100mm (4″) |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Lamp Life | >35,000 hours estimated average* |
| IP Rating | IP22 Type A |
Dimmable LED Drivers
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
2 Pin Strip to Power Clear Connectors – BCI10XB-2W
BCI10XB-2W clear connector makes it easy to connect single color 10mm wide LED strip to power in a narrow space. Connector length is 6.29″ (160mm). Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Strip Clear Connectors – BCI10BB-2
BCI10BB-2 Clear connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Power Clamp Connector – CL10XB-2G
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
2 Pin Strip to Strip Clamp Connector – CL10BB-2G
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Single Color Strip T Connector – S10-T2A
S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.