1-800-387-4081
The new LED Flex Strip Bright Plus series 24VDC FA60M28-10M-24V-X LED strips features the new high power 2835 SMD LED. It is 40% brighter than the 3528 SMD LED. Moreover it has a high lumen output of up to 100 lumens per watt. The dimmable LED Strip is available in Neutral white (4000K~4200K) and Warm White (3100K). Cut-able at marked intervals (6 LED cutting points) for custom length install. Available in 10 meter (32.8 feet) length roll.
Moreover, It is suitable for dry locations and has a 3M tape backing for easy installation. Easily mountable LED Strip into LED World’s Aluminum Channel profiles. All of our Flex Strips come with 12″ (30.5cm) lead wires to be powered with our Class 2 power supply.
Size of roll and maximum length: 10 meter (32.8 feet) roll
LED World’s LED Strip Lighting can be used for under counter lighting, architectural lighting, cove lighting, toe kick lighting and many other applications. Its small size and low voltage makes this lighting ideal for a wide range of applications.
LED Strip available in Warm White, Neutral White Color and Blue.
Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories are not included with this product. See Accessories tab above
Features
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat produced |
| Flexible LED light strips |
| Long life of high output LEDs |
| No RF interference |
| Solid state lighting |
| Super Bright 2835 SMD LEDs |
Product Description
The new LED Flex Strip Bright Plus series 24VDC FA60M28-10M-24V-X LED strips features the new high power 2835 SMD LED. It is 40% brighter than the 3528 SMD LED. Moreover it has a high lumen output of up to 100 lumens per watt. The dimmable LED Strip is available in Neutral white (4000K~4200K) and Warm White (3100K). Cut-able at marked intervals (6 LED cutting points) for custom length install. Available in 10 meter (32.8 feet) length roll.
Moreover, It is suitable for dry locations and has a 3M tape backing for easy installation. Easily mountable LED Strip into LED World’s Aluminum Channel profiles. All of our Flex Strips come with 12″ (30.5cm) lead wires to be powered with our Class 2 power supply.
Size of roll and maximum length: 10 meter (32.8 feet) roll
LED World’s LED Strip Lighting can be used for under counter lighting, architectural lighting, cove lighting, toe kick lighting and many other applications. Its small size and low voltage makes this lighting ideal for a wide range of applications.
LED Strip available in Warm White, Neutral White Color and Blue.
Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories are not included with this product. See Accessories tab above
Features
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat produced |
| Flexible LED light strips |
| Long life of high output LEDs |
| No RF interference |
| Solid state lighting |
| Super Bright 2835 SMD LEDs |
Technical Specifications
| Watt foot | 2.2 W/ft |
| Max Voltage | 24 VDC (regulated) |
| AMPs/Roll | 3 Amps |
| Brightness | 200-220 Lumens / ft |
| Roll Size | 10 Meters (32.8 feet) |
| Light Source | 60pcs/meter (39.37″) 2835 SMD LED |
| Dimensions | 10000(L) x 10(W) x 1(H)mm (32.8′ x 25/64″ x 0.03″) |
| Max Length | 10 Meters (32.8 feet) |
| LED Angle | 120° |
| Lamp Life | >40,000 hours estimated average* |
| IP Rating | IP20 Type A |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ +104°F) |
Dimmable LED Drivers
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
2 Pin Strip to Power Clear Connectors – BCI10XB-2W
BCI10XB-2W clear connector makes it easy to connect single color 10mm wide LED strip to power in a narrow space. Connector length is 6.29″ (160mm). Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Strip Clear Connectors – BCI10BB-2
BCI10BB-2 Clear connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Power Clamp Connector – CL10XB-2G
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
2 Pin Strip to Strip Clamp Connector – CL10BB-2G
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Single Color Strip T Connector – S10-T2A
S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
1 review for LED Flexstrip Bright Plus FA60M28-10M-24V-X
Product Description
The new LED Flex Strip Bright Plus series 24VDC FA60M28-10M-24V-X LED strips features the new high power 2835 SMD LED. It is 40% brighter than the 3528 SMD LED. Moreover it has a high lumen output of up to 100 lumens per watt. The dimmable LED Strip is available in Neutral white (4000K~4200K) and Warm White (3100K). Cut-able at marked intervals (6 LED cutting points) for custom length install. Available in 10 meter (32.8 feet) length roll.
Moreover, It is suitable for dry locations and has a 3M tape backing for easy installation. Easily mountable LED Strip into LED World’s Aluminum Channel profiles. All of our Flex Strips come with 12″ (30.5cm) lead wires to be powered with our Class 2 power supply.
Size of roll and maximum length: 10 meter (32.8 feet) roll
LED World’s LED Strip Lighting can be used for under counter lighting, architectural lighting, cove lighting, toe kick lighting and many other applications. Its small size and low voltage makes this lighting ideal for a wide range of applications.
LED Strip available in Warm White, Neutral White Color and Blue.
Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories are not included with this product. See Accessories tab above
Features
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat produced |
| Flexible LED light strips |
| Long life of high output LEDs |
| No RF interference |
| Solid state lighting |
| Super Bright 2835 SMD LEDs |
Technical Specifications
| Watt foot | 2.2 W/ft |
| Max Voltage | 24 VDC (regulated) |
| AMPs/Roll | 3 Amps |
| Brightness | 200-220 Lumens / ft |
| Roll Size | 10 Meters (32.8 feet) |
| Light Source | 60pcs/meter (39.37″) 2835 SMD LED |
| Dimensions | 10000(L) x 10(W) x 1(H)mm (32.8′ x 25/64″ x 0.03″) |
| Max Length | 10 Meters (32.8 feet) |
| LED Angle | 120° |
| Lamp Life | >40,000 hours estimated average* |
| IP Rating | IP20 Type A |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ +104°F) |
Dimmable LED Drivers
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
2 Pin Strip to Power Clear Connectors – BCI10XB-2W
BCI10XB-2W clear connector makes it easy to connect single color 10mm wide LED strip to power in a narrow space. Connector length is 6.29″ (160mm). Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Strip Clear Connectors – BCI10BB-2
BCI10BB-2 Clear connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered).
2 Pin Strip to Power Clamp Connector – CL10XB-2G
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
2 Pin Strip to Strip Clamp Connector – CL10BB-2G
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Single Color Strip T Connector – S10-T2A
S10-T2A 10mm T shape connector with cut marks for easy custom angle connection. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 3.5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
1 review for LED Flexstrip Bright Plus FA60M28-10M-24V-X
These LEDS look awesome in my kitchen! Look really good throughout the dimming range, ordered Warm White and it is a great color match to fill out the kitchen.
Greg (verified owner) –
These LEDS look awesome in my kitchen! Look really good throughout the dimming range, ordered Warm White and it is a great color match to fill out the kitchen.