1-800-387-4081
24VDC Multi-bend LED Flex Strip is an angle bendable LED Strip for custom shape lighting applications. Unlike standard LED Strips, Multi-bend LED Flex Strip can bend on two Axis allowing shaping to non-linear surfaces. Moreover, the strips features the new high power 2835 SMD LED (50% brighter than the 3528 SMD LED). It has a high lumen output of 1 watt to 100 lumens. Cut-able low voltage (24VDC) LED strip at marked intervals (6 LED intervals at indicated cutting points). It is suitable for dry locations use. LED Flex Strip Lighting has a 3M tape backing for easy installation. In addition, it is easily mountable onto most flat, clean dry surfaces free of burrows. All of our Flex Strips come with lead wires to make a hard-wired connection with our Class 2 power supply.
Size of roll and maximum length: 5 meter (16.4 feet) roll.
Ideal LED Strip for applications such as sign letter lighting, architectural lighting, perimeter lighting and many more. Moreover, Its small size and low voltage makes this lighting ideal for a wide range of applications.
Multi-bend LED Strip available in Warm White/Neutral White Color.
Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories are not included with this product. See Accessories tab above
Features
| Angle bendable for custom shape lighting |
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat produced |
| Flexible LED light strips |
| Long life of high output LEDs |
| No RF interference |
| Solid state lighting |
| Super Bright 2835 SMD LEDs |
Product Description
24VDC Multi-bend LED Flex Strip is an angle bendable LED Strip for custom shape lighting applications. Unlike standard LED Strips, Multi-bend LED Flex Strip can bend on two Axis allowing shaping to non-linear surfaces. Moreover, the strips features the new high power 2835 SMD LED (50% brighter than the 3528 SMD LED). It has a high lumen output of 1 watt to 100 lumens. Cut-able low voltage (24VDC) LED strip at marked intervals (6 LED intervals at indicated cutting points). It is suitable for dry locations use. LED Flex Strip Lighting has a 3M tape backing for easy installation. In addition, it is easily mountable onto most flat, clean dry surfaces free of burrows. All of our Flex Strips come with lead wires to make a hard-wired connection with our Class 2 power supply.
Size of roll and maximum length: 5 meter (16.4 feet) roll.
Ideal LED Strip for applications such as sign letter lighting, architectural lighting, perimeter lighting and many more. Moreover, Its small size and low voltage makes this lighting ideal for a wide range of applications.
Multi-bend LED Strip available in Warm White/Neutral White Color.
Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories are not included with this product. See Accessories tab above
Features
| Angle bendable for custom shape lighting |
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat produced |
| Flexible LED light strips |
| Long life of high output LEDs |
| No RF interference |
| Solid state lighting |
| Super Bright 2835 SMD LEDs |
Technical Specifications
| Watt foot | 2.2 W/ft |
| Max Voltage | 24 VDC (regulated) |
| AMPs/Roll | 1.5 Amps |
| Brightness | 170-180 Lumens / ft |
| Roll Size | 5 Meters (16.4 feet) |
| Light Source | 60pcs/meter (39.37″) 2835 SMD LED |
| Dimensions | 5000(L) x 8(W) x 1(H)mm (16.4′ x 0.31″ x 0.03″) |
| Max Length | 5 Meters (16.4 feet) |
| LED Angle | 120° |
| Lamp Life | >25,000 hours estimated average* |
| IP Rating | IP20 type A |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ +104°F) |
Dimmable LED Drivers
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Product Description
24VDC Multi-bend LED Flex Strip is an angle bendable LED Strip for custom shape lighting applications. Unlike standard LED Strips, Multi-bend LED Flex Strip can bend on two Axis allowing shaping to non-linear surfaces. Moreover, the strips features the new high power 2835 SMD LED (50% brighter than the 3528 SMD LED). It has a high lumen output of 1 watt to 100 lumens. Cut-able low voltage (24VDC) LED strip at marked intervals (6 LED intervals at indicated cutting points). It is suitable for dry locations use. LED Flex Strip Lighting has a 3M tape backing for easy installation. In addition, it is easily mountable onto most flat, clean dry surfaces free of burrows. All of our Flex Strips come with lead wires to make a hard-wired connection with our Class 2 power supply.
Size of roll and maximum length: 5 meter (16.4 feet) roll.
Ideal LED Strip for applications such as sign letter lighting, architectural lighting, perimeter lighting and many more. Moreover, Its small size and low voltage makes this lighting ideal for a wide range of applications.
Multi-bend LED Strip available in Warm White/Neutral White Color.
Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories are not included with this product. See Accessories tab above
Features
| Angle bendable for custom shape lighting |
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat produced |
| Flexible LED light strips |
| Long life of high output LEDs |
| No RF interference |
| Solid state lighting |
| Super Bright 2835 SMD LEDs |
Technical Specifications
| Watt foot | 2.2 W/ft |
| Max Voltage | 24 VDC (regulated) |
| AMPs/Roll | 1.5 Amps |
| Brightness | 170-180 Lumens / ft |
| Roll Size | 5 Meters (16.4 feet) |
| Light Source | 60pcs/meter (39.37″) 2835 SMD LED |
| Dimensions | 5000(L) x 8(W) x 1(H)mm (16.4′ x 0.31″ x 0.03″) |
| Max Length | 5 Meters (16.4 feet) |
| LED Angle | 120° |
| Lamp Life | >25,000 hours estimated average* |
| IP Rating | IP20 type A |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ +104°F) |
Dimmable LED Drivers
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.