1-800-387-4081
24VDC Weather Resistant Outdoor rated Long run series color changing RGBW LED Flex Strip features current IC driven 4 in one 5050 SMD LED Chip. The standard 5050 SMD RGBW color changing roll can have color shift due to voltage drops exceeding 16 feet (5 meters) in length but IC driven 4 in one 5050 SMD LED regulates the voltage for consistent color up to 33 feet. RGBW LED Flex Strip has three colors; Red, Green, Blue and an additional color of Warm White (3000K) for better whites. RGBW LED Flex Strip roll comes in a 32.8 feet (10 meters) long roll in a flexible ultra-thin strip with a 3M adhesive backing for easy mounting. Use with LED World’s optional HUEDA™ DMX Color Controller.
RGBW LED Strip is ideal for use in applications such as color changing architectural lighting, sign letter lighting, color cove lighting, bar lighting and many more.
RGBW is different from the older RGB-W where each 5050 Chip has the standard three colors in one chip plus one separate 5050 SMD for white. This creates white spots and greatly diminishes the color mixing effect. Please see PDF and instructions for further details.
Type C is suitable for damp outdoor location use. Strip comes in a protective Silicone covering. It has a peel and stick double-sided adhesive backing. The FC60M51-10M-24V-RGBW comes with a five wire pigtail (50cm) 20″ long for easy connection to our optional color controllers. In addition, our RGBW LED strip is cuttable at marked intervals (every 6 LEDs). Please carefully read instructions before installing.
Note: This product requires an optional Class 2 Power Supply and Color Controller (not included).
Note: Accessories are not included with this product. See Accessories tab.
RGBW LED Flex Strip Features
| Long run 10m (32.8ft) RGBW Protective Silicone covering Strip |
| Constant Current IC design |
| Separate Warm White LED for a wider color spectrum of White |
| Color changing RGBW Bright 5050 SMD LEDs with 4 Chips in 1 LED |
| Can be cut to size at marked intervals and rejoined by experienced personnel |
| Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F) |
| Long life span of LED lights of up to 25,000 hours + |
Product Description
24VDC Weather Resistant Outdoor rated Long run series color changing RGBW LED Flex Strip features current IC driven 4 in one 5050 SMD LED Chip. The standard 5050 SMD RGBW color changing roll can have color shift due to voltage drops exceeding 16 feet (5 meters) in length but IC driven 4 in one 5050 SMD LED regulates the voltage for consistent color up to 33 feet. RGBW LED Flex Strip has three colors; Red, Green, Blue and an additional color of Warm White (3000K) for better whites. RGBW LED Flex Strip roll comes in a 32.8 feet (10 meters) long roll in a flexible ultra-thin strip with a 3M adhesive backing for easy mounting. Use with LED World’s optional HUEDA™ DMX Color Controller.
RGBW LED Strip is ideal for use in applications such as color changing architectural lighting, sign letter lighting, color cove lighting, bar lighting and many more.
RGBW is different from the older RGB-W where each 5050 Chip has the standard three colors in one chip plus one separate 5050 SMD for white. This creates white spots and greatly diminishes the color mixing effect. Please see PDF and instructions for further details.
Type C is suitable for damp outdoor location use. Strip comes in a protective Silicone covering. It has a peel and stick double-sided adhesive backing. The FC60M51-10M-24V-RGBW comes with a five wire pigtail (50cm) 20″ long for easy connection to our optional color controllers. In addition, our RGBW LED strip is cuttable at marked intervals (every 6 LEDs). Please carefully read instructions before installing.
Note: This product requires an optional Class 2 Power Supply and Color Controller (not included).
Note: Accessories are not included with this product. See Accessories tab.
RGBW LED Flex Strip Features
| Long run 10m (32.8ft) RGBW Protective Silicone covering Strip |
| Constant Current IC design |
| Separate Warm White LED for a wider color spectrum of White |
| Color changing RGBW Bright 5050 SMD LEDs with 4 Chips in 1 LED |
| Can be cut to size at marked intervals and rejoined by experienced personnel |
| Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F) |
| Long life span of LED lights of up to 25,000 hours + |
Technical Specifications
| Watt foot | 2.7 Watts/ft |
| Max Voltage | 24 VDC (Regulated/Class 2) |
| Amps/Roll | 3.7 Amps (10m Roll) |
| Max Current | 112mA/Foot (30.5cm) |
| Roll Size | 10m (32.8 ft) |
| Light Source | 60 pcs/meter (39.37″) 5050 RGBW SMD LED (4 in 1) |
| Dimensions | 14(W) x 4(H)mm (0.55″ x 0.15″) |
| LEDs Type | 5050 SMD LED |
| LED Angle | 120° |
| Mounting | 3M Adhesive Tape, Type C (IP62) |
| Pitch Distance of LEDs | 16.67 mm |
| Lamp Life | >25,000 hours (70% Lumen Maintenance) |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ 104°F) |
Power Supplies
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
Value line Controllers
RGB-W Multi-Zone Remote Controller FUT089 for LS2
FUT089 Multi-Zone (8 zones) RGB-W LED remote controller with RF 2.4GHz. It covers distance upto 22.8m (75 feet) clear line of sight. Works with our LS2 Color Receiver.
RGBW LED Receiver LS2 featuring Mesh Network
LS2 is the 5 in 1 (RGB, RGBW, CCT, RGB+CCT and single color) color receiver can control RGB LED Flex Strips of either 12 or 24VDC. The LS2 controller features auto-transmitting and auto-synchronizing function with brightness, CCT, RGB, RGBW and RGB+CCT output mode.
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Master Color Controllers
DMX Touch Panel RGB/RGBW LED Master Controller HUEDA LW-2814DMX
HUEDA™ multi-zone DMX Touch Panel Master Color controller features easy to touch and control colors, brightness and color changing speed effects.
DMX Color Master Controller HUEDA™ Hub H-2818WIN
The H-2818WIN HUEDA™ Hub (master) is a Wi-Fi/RF color controller that allows you to control color changing of RGB and RGBW LED Lighting through DMX standard or wireless HUEDA RF color receivers.
Color DMX Decoders
5 Channel LED DMX Decoder & Zone Controller LT-995
DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting. Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 5 channels 256 shades of brightness.
32CH LT-932-OLED DMX/RDM LED Color Decoder
DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures. Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.
5 Channel DMX512 8-16 bit Color Decoder Pro Series H-DMX2108A-5M-3
Multiple Zone Control DMX decoder to control multiple RGB-W strips as one. Converts analog signal to universal standard DMX512/1990. Uses 5 channels with 256 shades of brightness.
DMX512 Signal Amplifier/Repeater – SR-2100AMP
SR-2100AMP is a DMX512 signal amplifier complies with standard protocol DMX512 (1990). With DMX signal input and DMX signal output, the signal amplifier works with DMX decoder to expand DMX signals in parallel up to 100m (328ft) range.
Outdoor DMX 512 Decoder HUEDA H-2102B(W)
H-2102B(W) is the water resistant standard DMX512 compliant control interface, allows you to set DMX address via digital numeric display. Compatible with DMX Master HUEDA™.
Product Accessories
RGBW 2464 Wire – 16.4ft (5m) length
Low voltage 20 Gauge / Meter cord. Comes in 16.40 feet length. RGBW Power cord with pigtail wires on both ends
Product Description
24VDC Weather Resistant Outdoor rated Long run series color changing RGBW LED Flex Strip features current IC driven 4 in one 5050 SMD LED Chip. The standard 5050 SMD RGBW color changing roll can have color shift due to voltage drops exceeding 16 feet (5 meters) in length but IC driven 4 in one 5050 SMD LED regulates the voltage for consistent color up to 33 feet. RGBW LED Flex Strip has three colors; Red, Green, Blue and an additional color of Warm White (3000K) for better whites. RGBW LED Flex Strip roll comes in a 32.8 feet (10 meters) long roll in a flexible ultra-thin strip with a 3M adhesive backing for easy mounting. Use with LED World’s optional HUEDA™ DMX Color Controller.
RGBW LED Strip is ideal for use in applications such as color changing architectural lighting, sign letter lighting, color cove lighting, bar lighting and many more.
RGBW is different from the older RGB-W where each 5050 Chip has the standard three colors in one chip plus one separate 5050 SMD for white. This creates white spots and greatly diminishes the color mixing effect. Please see PDF and instructions for further details.
Type C is suitable for damp outdoor location use. Strip comes in a protective Silicone covering. It has a peel and stick double-sided adhesive backing. The FC60M51-10M-24V-RGBW comes with a five wire pigtail (50cm) 20″ long for easy connection to our optional color controllers. In addition, our RGBW LED strip is cuttable at marked intervals (every 6 LEDs). Please carefully read instructions before installing.
Note: This product requires an optional Class 2 Power Supply and Color Controller (not included).
Note: Accessories are not included with this product. See Accessories tab.
RGBW LED Flex Strip Features
| Long run 10m (32.8ft) RGBW Protective Silicone covering Strip |
| Constant Current IC design |
| Separate Warm White LED for a wider color spectrum of White |
| Color changing RGBW Bright 5050 SMD LEDs with 4 Chips in 1 LED |
| Can be cut to size at marked intervals and rejoined by experienced personnel |
| Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F) |
| Long life span of LED lights of up to 25,000 hours + |
Technical Specifications
| Watt foot | 2.7 Watts/ft |
| Max Voltage | 24 VDC (Regulated/Class 2) |
| Amps/Roll | 3.7 Amps (10m Roll) |
| Max Current | 112mA/Foot (30.5cm) |
| Roll Size | 10m (32.8 ft) |
| Light Source | 60 pcs/meter (39.37″) 5050 RGBW SMD LED (4 in 1) |
| Dimensions | 14(W) x 4(H)mm (0.55″ x 0.15″) |
| LEDs Type | 5050 SMD LED |
| LED Angle | 120° |
| Mounting | 3M Adhesive Tape, Type C (IP62) |
| Pitch Distance of LEDs | 16.67 mm |
| Lamp Life | >25,000 hours (70% Lumen Maintenance) |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ 104°F) |
Power Supplies
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
100W 24VDC Class 2 DMX LED Driver LW-24100-5C-ADJ
| Max Continuous Load | 100 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
Value line Controllers
RGB-W Multi-Zone Remote Controller FUT089 for LS2
FUT089 Multi-Zone (8 zones) RGB-W LED remote controller with RF 2.4GHz. It covers distance upto 22.8m (75 feet) clear line of sight. Works with our LS2 Color Receiver.
RGBW LED Receiver LS2 featuring Mesh Network
LS2 is the 5 in 1 (RGB, RGBW, CCT, RGB+CCT and single color) color receiver can control RGB LED Flex Strips of either 12 or 24VDC. The LS2 controller features auto-transmitting and auto-synchronizing function with brightness, CCT, RGB, RGBW and RGB+CCT output mode.
Aluminum Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Master Color Controllers
DMX Touch Panel RGB/RGBW LED Master Controller HUEDA LW-2814DMX
HUEDA™ multi-zone DMX Touch Panel Master Color controller features easy to touch and control colors, brightness and color changing speed effects.
DMX Color Master Controller HUEDA™ Hub H-2818WIN
The H-2818WIN HUEDA™ Hub (master) is a Wi-Fi/RF color controller that allows you to control color changing of RGB and RGBW LED Lighting through DMX standard or wireless HUEDA RF color receivers.
Color DMX Decoders
5 Channel LED DMX Decoder & Zone Controller LT-995
DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting. Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 5 channels 256 shades of brightness.
32CH LT-932-OLED DMX/RDM LED Color Decoder
DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures. Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.
5 Channel DMX512 8-16 bit Color Decoder Pro Series H-DMX2108A-5M-3
Multiple Zone Control DMX decoder to control multiple RGB-W strips as one. Converts analog signal to universal standard DMX512/1990. Uses 5 channels with 256 shades of brightness.
DMX512 Signal Amplifier/Repeater – SR-2100AMP
SR-2100AMP is a DMX512 signal amplifier complies with standard protocol DMX512 (1990). With DMX signal input and DMX signal output, the signal amplifier works with DMX decoder to expand DMX signals in parallel up to 100m (328ft) range.
Outdoor DMX 512 Decoder HUEDA H-2102B(W)
H-2102B(W) is the water resistant standard DMX512 compliant control interface, allows you to set DMX address via digital numeric display. Compatible with DMX Master HUEDA™.
Product Accessories
RGBW 2464 Wire – 16.4ft (5m) length
Low voltage 20 Gauge / Meter cord. Comes in 16.40 feet length. RGBW Power cord with pigtail wires on both ends
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.