24VDC RGBW high brightness color changing LED Flex Strip features a new 4 in one 5050 SMD LED Chip. The standard 5050 SMD has three colors, Red, Green and Blue but RGBW has Red, Green and Blue plus an additional color of Warm White (2700K +/-100K). Which adds to the wide color spectrum while creating a super bright LED strip! The roll comes in a 16.4 feet (5 meters) long roll in a flexible ultra-thin strip with a 3M adhesive backing. Use with LED World’s optional HUEDA™ DMX Color Controller.
Designed for the lighting designers and professionals. Ideal for architectural lighting, sign letter lighting, color cove lighting, bar lighting, stage lighting, and many other applications.
RGBW 5050 Chip has the standard three colors in one chip plus one separate 5050 SMD for white. This creates white spots and greatly diminishes the color mixing effect. Please see PDF and instructions for further details.
Note that this Type A is suitable for indoor use in dry location and has a peel and stick double-sided adhesive backing. It is recommended to be installed in the optional Aluminum Channel to extend the life of the LEDs. The FA60M50-5M-24V-RGBW comes with a five wire pigtail (50cm) 20″ long for easy connection to our optional color controllers. The LED strip can be cut to size at marked intervals, every 6 LED (24VDC). Please carefully read instructions before installing.
Note: This product requires an optional Class 2 Power Supply and Color Controller (not included)
Note: Accessories are not included with this product. See Accessories tab above
Separate Warm White LED for a wider color spectrum of White |
24 volts DC, 6 watts per foot |
Color changing RGBW Bright 5050 SMD LEDs with 4 Chips in 1 LED. |
Can be cut to size at marked intervals and rejoined by experienced personnel |
Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F) |
Long life span of LED lights of up to 25,000 hours + |
24VDC RGBW high brightness color changing LED Flex Strip features a new 4 in one 5050 SMD LED Chip. The standard 5050 SMD has three colors, Red, Green and Blue but RGBW has Red, Green and Blue plus an additional color of Warm White (2700K +/-100K). Which adds to the wide color spectrum while creating a super bright LED strip! The roll comes in a 16.4 feet (5 meters) long roll in a flexible ultra-thin strip with a 3M adhesive backing. Use with LED World’s optional HUEDA™ DMX Color Controller.
Designed for the lighting designers and professionals. Ideal for architectural lighting, sign letter lighting, color cove lighting, bar lighting, stage lighting, and many other applications.
RGBW 5050 Chip has the standard three colors in one chip plus one separate 5050 SMD for white. This creates white spots and greatly diminishes the color mixing effect. Please see PDF and instructions for further details.
Note that this Type A is suitable for indoor use in dry location and has a peel and stick double-sided adhesive backing. It is recommended to be installed in the optional Aluminum Channel to extend the life of the LEDs. The FA60M50-5M-24V-RGBW comes with a five wire pigtail (50cm) 20″ long for easy connection to our optional color controllers. The LED strip can be cut to size at marked intervals, every 6 LED (24VDC). Please carefully read instructions before installing.
Note: This product requires an optional Class 2 Power Supply and Color Controller (not included)
Note: Accessories are not included with this product. See Accessories tab above
Separate Warm White LED for a wider color spectrum of White |
24 volts DC, 6 watts per foot |
Color changing RGBW Bright 5050 SMD LEDs with 4 Chips in 1 LED. |
Can be cut to size at marked intervals and rejoined by experienced personnel |
Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F) |
Long life span of LED lights of up to 25,000 hours + |
Watt foot | 6 Watts/ft |
Max Voltage | 24 VDC (Regulated/Class 2) |
Amps/Roll | 4 Amps (5m Roll) |
Max Current | 250mA/Foot (30.5cm) |
Roll Size | 5m (16.4 ft) |
Light Source | 60 pcs/meter (39.37″) 5050 RGBW SMD LED (4 in 1) |
Dimensions | 12(W) x 2.5(H)mm (0.47″ x 3/32″) |
LEDs Type | 5050 SMD LED |
LED Angle | 120° |
Mount | Smooth Clean Surface – burrows free (ambient temperature) |
Pitch Distance of LEDs | 16.67 mm |
Lamp Life | >25,000 hours (70% Lumen Maintenance) |
Operating Temperature | -25°C ~ +40°C (-13°F ~ 104°F) |
DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting. Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 5 channels 256 shades of brightness.
DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures. Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.
H-2102B(W) is the water resistant standard DMX512 compliant control interface, allows you to set DMX address via digital numeric display. Compatible with DMX Master HUEDA™.
CL12BB-5 connector makes it easy to join two 12mm wide RGBW LED strips together. This transparent connector makes RGBW strip lighting seamless. Use only with LED World’s 12mm wide Type A RGBW Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
24VDC RGBW high brightness color changing LED Flex Strip features a new 4 in one 5050 SMD LED Chip. The standard 5050 SMD has three colors, Red, Green and Blue but RGBW has Red, Green and Blue plus an additional color of Warm White (2700K +/-100K). Which adds to the wide color spectrum while creating a super bright LED strip! The roll comes in a 16.4 feet (5 meters) long roll in a flexible ultra-thin strip with a 3M adhesive backing. Use with LED World’s optional HUEDA™ DMX Color Controller.
Designed for the lighting designers and professionals. Ideal for architectural lighting, sign letter lighting, color cove lighting, bar lighting, stage lighting, and many other applications.
RGBW 5050 Chip has the standard three colors in one chip plus one separate 5050 SMD for white. This creates white spots and greatly diminishes the color mixing effect. Please see PDF and instructions for further details.
Note that this Type A is suitable for indoor use in dry location and has a peel and stick double-sided adhesive backing. It is recommended to be installed in the optional Aluminum Channel to extend the life of the LEDs. The FA60M50-5M-24V-RGBW comes with a five wire pigtail (50cm) 20″ long for easy connection to our optional color controllers. The LED strip can be cut to size at marked intervals, every 6 LED (24VDC). Please carefully read instructions before installing.
Note: This product requires an optional Class 2 Power Supply and Color Controller (not included)
Note: Accessories are not included with this product. See Accessories tab above
Separate Warm White LED for a wider color spectrum of White |
24 volts DC, 6 watts per foot |
Color changing RGBW Bright 5050 SMD LEDs with 4 Chips in 1 LED. |
Can be cut to size at marked intervals and rejoined by experienced personnel |
Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F) |
Long life span of LED lights of up to 25,000 hours + |
Watt foot | 6 Watts/ft |
Max Voltage | 24 VDC (Regulated/Class 2) |
Amps/Roll | 4 Amps (5m Roll) |
Max Current | 250mA/Foot (30.5cm) |
Roll Size | 5m (16.4 ft) |
Light Source | 60 pcs/meter (39.37″) 5050 RGBW SMD LED (4 in 1) |
Dimensions | 12(W) x 2.5(H)mm (0.47″ x 3/32″) |
LEDs Type | 5050 SMD LED |
LED Angle | 120° |
Mount | Smooth Clean Surface – burrows free (ambient temperature) |
Pitch Distance of LEDs | 16.67 mm |
Lamp Life | >25,000 hours (70% Lumen Maintenance) |
Operating Temperature | -25°C ~ +40°C (-13°F ~ 104°F) |
DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting. Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 5 channels 256 shades of brightness.
DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures. Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.
H-2102B(W) is the water resistant standard DMX512 compliant control interface, allows you to set DMX address via digital numeric display. Compatible with DMX Master HUEDA™.
CL12BB-5 connector makes it easy to join two 12mm wide RGBW LED strips together. This transparent connector makes RGBW strip lighting seamless. Use only with LED World’s 12mm wide Type A RGBW Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
There are no reviews yet.
Reviews
There are no reviews yet.