1-800-387-4081
$0.00 0 1-800-387-4081
Side Emitting RGB Strip FA60M40-2.5M-SV-12V-RGB Triple Bright LED Flex Strip lighting comes in a 8.2 feet (2.5 meters) long roll with side emitting Nichia tri-chip 4010 SMD LEDs in an ultra-thin strip. Standard RGB 5050 tri-chip is bendable on one axis emitting horizontally. The New side emitting Nichia tri-chip 4010 SMD LED is bendable on the horizontal while emitting light vertically. This allow more unique use of the RGB lighting when outlining channel letters, unique shapes that require a perpendicular emitting light. Triple Bright Side Emitting, Type A (IP20) Flex Strip is suitable for dry locations.
Designed for the lighting designers. Ideal for RGB sign letter lighting, bar lighting, stage lighting, perimeter lighting and many other applications. Use with any of our RGB Controllers to dynamically color control of the RGB strip lighting or multiple RGB strips VIA DMX or wireless smart phone app controls. See our color controllers tab for optional color controllers.
Like our other LED Flex Strips, Triple Bright-Side has a 3M tape backing for easy installation. Cut RGB strip at each 3 LED intervals at marking points. The base of the Flex Strips are flat and flexible. Its small size and low voltage makes this lighting ideal for a wide range of applications. Please see PDF and instructions for further details.
Note: This product requires an optional Class 2 Power Supply and Color Controller (not included). Please call us during business hours for multiple roll setup questions.
Note: Accessories are not included with this product. See Accessories tab.
Features
| Nichia tri-chip 4010 SMD LEDs with three colors in one chip |
| 12 volts DC, 4.4 watts per foot |
| 2.5 Meter roll (8.2ft) |
| Color changing RGB Triple Bright Side Emitting SMD LEDs. Little or no heat. |
| Can be cut to size at marked intervals and rejoined by experienced personnel in low voltage lighting |
| Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F) |
| Long life span of LED lights of up to 25,000 hours + |
Product Description
Side Emitting RGB Strip FA60M40-2.5M-SV-12V-RGB Triple Bright LED Flex Strip lighting comes in a 8.2 feet (2.5 meters) long roll with side emitting Nichia tri-chip 4010 SMD LEDs in an ultra-thin strip. Standard RGB 5050 tri-chip is bendable on one axis emitting horizontally. The New side emitting Nichia tri-chip 4010 SMD LED is bendable on the horizontal while emitting light vertically. This allow more unique use of the RGB lighting when outlining channel letters, unique shapes that require a perpendicular emitting light. Triple Bright Side Emitting, Type A (IP20) Flex Strip is suitable for dry locations.
Designed for the lighting designers. Ideal for RGB sign letter lighting, bar lighting, stage lighting, perimeter lighting and many other applications. Use with any of our RGB Controllers to dynamically color control of the RGB strip lighting or multiple RGB strips VIA DMX or wireless smart phone app controls. See our color controllers tab for optional color controllers.
Like our other LED Flex Strips, Triple Bright-Side has a 3M tape backing for easy installation. Cut RGB strip at each 3 LED intervals at marking points. The base of the Flex Strips are flat and flexible. Its small size and low voltage makes this lighting ideal for a wide range of applications. Please see PDF and instructions for further details.
Note: This product requires an optional Class 2 Power Supply and Color Controller (not included). Please call us during business hours for multiple roll setup questions.
Note: Accessories are not included with this product. See Accessories tab.
Features
| Nichia tri-chip 4010 SMD LEDs with three colors in one chip |
| 12 volts DC, 4.4 watts per foot |
| 2.5 Meter roll (8.2ft) |
| Color changing RGB Triple Bright Side Emitting SMD LEDs. Little or no heat. |
| Can be cut to size at marked intervals and rejoined by experienced personnel in low voltage lighting |
| Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F) |
| Long life span of LED lights of up to 25,000 hours + |
Technical Specifications
| Watt foot | 4.4 W/ft |
| Max Voltage | 12 VDC (Regulated/Class 2) |
| Roll Size | 2.5 Meters (8.2 feet) |
| Amps/Roll | 1.5 Amps Roll |
| Max Current | 60mA per Segment Max |
| Light Source | 60 pcs/meter 4010 Side Emitting SMD RGB (3in1) |
| Dimensions | 5000(L) x 10 (W) x 1.5(H)mm (16.4′ x 0.39″ x 0.059″) |
| LEDs Type | 4010 SMD Side Emitting LED |
| LED Angle | 120° |
| Mounting | 3M Adhesive Tape, Type A |
| Lamp Life | >30,000 hours |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ 104°F) |
Power Supplies
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
200W 12VDC Class 2 LED Power Supply XLD200B-412V-FC
| Voltage | 12 VDC Output / 90~277 VAC Input |
| Power Supply Type | Regulated Class 2 |
| IP Rating | IP65 (Indoor or Outdoor use) |
| Warranty | 3 Years |
60W 12VDC Class 2 LED Power Supply YHY-12005000
| Max Continuous Load | 60 W (48 W continuous) |
| Voltage | 12 VDC Output / 100~240 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2
| Max Continuous Load | 180W (3 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
75W 12VDC Class 2 LED Power Supply XLD75B-112V-FC
| Voltage | 12 VDC Output / 90~277 VAC Input |
| Power Supply Type | Regulated Class 2 |
| IP Rating | IP65 (Indoor or Outdoor use) |
| Warranty | 3 Years |
Value line Controllers
RGB-W Multi-Zone Remote Controller FUT089 for LS2
FUT089 Multi-Zone (8 zones) RGB-W LED remote controller with RF 2.4GHz. It covers distance upto 22.8m (75 feet) clear line of sight. Works with our LS2 Color Receiver.
RGBW LED Receiver LS2 featuring Mesh Network
LS2 is the 5 in 1 (RGB, RGBW, CCT, RGB+CCT and single color) color receiver can control RGB LED Flex Strips of either 12 or 24VDC. The LS2 controller features auto-transmitting and auto-synchronizing function with brightness, CCT, RGB, RGBW and RGB+CCT output mode.
Side Emitting RGB Strip Video
Master Color Controllers
DMX Touch Panel RGB/RGBW LED Master Controller HUEDA LW-2814DMX
HUEDA™ multi-zone DMX Touch Panel Master Color controller features easy to touch and control colors, brightness and color changing speed effects.
DMX Color Master Controller HUEDA Hub H-2818WIN
The H-2818WIN HUEDA™ Hub (master) is a WiFi/RF color controller that allows you to control color changing of RGB and RGBW LED Lighting through DMX standard or wireless Hueda RF color receivers.
Color DMX Decoders
5 Channel LED DMX Decoder & Zone Controller LT-995
DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting. Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 5 channels 256 shades of brightness.
32CH LT-932-OLED DMX/RDM LED Color Decoder
DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures. Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.
DMX512 Signal Amplifier/Repeater – SR-2100AMP
SR-2100AMP is a DMX512 signal amplifier complies with standard protocol DMX512 (1990). With DMX signal input and DMX signal output, the signal amplifier works with DMX decoder to expand DMX signals in parallel up to 100m (328ft) range.
Outdoor DMX 512 Decoder HUEDA H-2102B(W)
H-2102B(W) is the water resistant standard DMX512 compliant control interface, allows you to set DMX address via digital numeric display. Compatible with DMX Master HUEDA™.
5 Channel DMX512 8-16 bit Color Decoder Pro Series H-DMX2108A-5M-3
Multiple Zone Control DMX decoder to control multiple RGB-W strips as one. Converts analog signal to universal standard DMX512/1990. Uses 5 channels with 256 shades of brightness.
Product Accessories
L Connector for RGB Strip RGBL10MM
RGBL10MM RGB Strip 10mm L shape corner Connector. This connector is only compatible with Type A RGB Flex Strip (No coating or cover). Each connection (up to 2 for this connector) must be made with the RGB10W0 Splice Connector. Low voltage use only, max 4 Amps.
RGB 2464 Wire – 16.4ft (5m) length
Low voltage 20 Gauge / Meter cord. Comes in 16.40 feet length. RGB Power cord with pigtail wires on both ends
Product Description
Side Emitting RGB Strip FA60M40-2.5M-SV-12V-RGB Triple Bright LED Flex Strip lighting comes in a 8.2 feet (2.5 meters) long roll with side emitting Nichia tri-chip 4010 SMD LEDs in an ultra-thin strip. Standard RGB 5050 tri-chip is bendable on one axis emitting horizontally. The New side emitting Nichia tri-chip 4010 SMD LED is bendable on the horizontal while emitting light vertically. This allow more unique use of the RGB lighting when outlining channel letters, unique shapes that require a perpendicular emitting light. Triple Bright Side Emitting, Type A (IP20) Flex Strip is suitable for dry locations.
Designed for the lighting designers. Ideal for RGB sign letter lighting, bar lighting, stage lighting, perimeter lighting and many other applications. Use with any of our RGB Controllers to dynamically color control of the RGB strip lighting or multiple RGB strips VIA DMX or wireless smart phone app controls. See our color controllers tab for optional color controllers.
Like our other LED Flex Strips, Triple Bright-Side has a 3M tape backing for easy installation. Cut RGB strip at each 3 LED intervals at marking points. The base of the Flex Strips are flat and flexible. Its small size and low voltage makes this lighting ideal for a wide range of applications. Please see PDF and instructions for further details.
Note: This product requires an optional Class 2 Power Supply and Color Controller (not included). Please call us during business hours for multiple roll setup questions.
Note: Accessories are not included with this product. See Accessories tab.
Features
| Nichia tri-chip 4010 SMD LEDs with three colors in one chip |
| 12 volts DC, 4.4 watts per foot |
| 2.5 Meter roll (8.2ft) |
| Color changing RGB Triple Bright Side Emitting SMD LEDs. Little or no heat. |
| Can be cut to size at marked intervals and rejoined by experienced personnel in low voltage lighting |
| Operating temperature: -25°C ~ 40°C (-13°F ~ 104°F) |
| Long life span of LED lights of up to 25,000 hours + |
Technical Specifications
| Watt foot | 4.4 W/ft |
| Max Voltage | 12 VDC (Regulated/Class 2) |
| Roll Size | 2.5 Meters (8.2 feet) |
| Amps/Roll | 1.5 Amps Roll |
| Max Current | 60mA per Segment Max |
| Light Source | 60 pcs/meter 4010 Side Emitting SMD RGB (3in1) |
| Dimensions | 5000(L) x 10 (W) x 1.5(H)mm (16.4′ x 0.39″ x 0.059″) |
| LEDs Type | 4010 SMD Side Emitting LED |
| LED Angle | 120° |
| Mounting | 3M Adhesive Tape, Type A |
| Lamp Life | >30,000 hours |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ 104°F) |
Power Supplies
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
200W 12VDC Class 2 LED Power Supply XLD200B-412V-FC
| Voltage | 12 VDC Output / 90~277 VAC Input |
| Power Supply Type | Regulated Class 2 |
| IP Rating | IP65 (Indoor or Outdoor use) |
| Warranty | 3 Years |
60W 12VDC Class 2 LED Power Supply YHY-12005000
| Max Continuous Load | 60 W (48 W continuous) |
| Voltage | 12 VDC Output / 100~240 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2
| Max Continuous Load | 180W (3 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
75W 12VDC Class 2 LED Power Supply XLD75B-112V-FC
| Voltage | 12 VDC Output / 90~277 VAC Input |
| Power Supply Type | Regulated Class 2 |
| IP Rating | IP65 (Indoor or Outdoor use) |
| Warranty | 3 Years |
Value line Controllers
RGB-W Multi-Zone Remote Controller FUT089 for LS2
FUT089 Multi-Zone (8 zones) RGB-W LED remote controller with RF 2.4GHz. It covers distance upto 22.8m (75 feet) clear line of sight. Works with our LS2 Color Receiver.
RGBW LED Receiver LS2 featuring Mesh Network
LS2 is the 5 in 1 (RGB, RGBW, CCT, RGB+CCT and single color) color receiver can control RGB LED Flex Strips of either 12 or 24VDC. The LS2 controller features auto-transmitting and auto-synchronizing function with brightness, CCT, RGB, RGBW and RGB+CCT output mode.
Side Emitting RGB Strip Video
Master Color Controllers
DMX Touch Panel RGB/RGBW LED Master Controller HUEDA LW-2814DMX
HUEDA™ multi-zone DMX Touch Panel Master Color controller features easy to touch and control colors, brightness and color changing speed effects.
DMX Color Master Controller HUEDA Hub H-2818WIN
The H-2818WIN HUEDA™ Hub (master) is a WiFi/RF color controller that allows you to control color changing of RGB and RGBW LED Lighting through DMX standard or wireless Hueda RF color receivers.
Color DMX Decoders
5 Channel LED DMX Decoder & Zone Controller LT-995
DMX Decoder for use with RGB low voltage LED Strips, bars and other low voltage LED RGB lighting. Set DMX decoder to desire channel (address) to control one or many zones (to control multiple RGB strips). Converts analog signal to universal standard DMX512/1990. Uses 5 channels 256 shades of brightness.
32CH LT-932-OLED DMX/RDM LED Color Decoder
DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures. Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.
DMX512 Signal Amplifier/Repeater – SR-2100AMP
SR-2100AMP is a DMX512 signal amplifier complies with standard protocol DMX512 (1990). With DMX signal input and DMX signal output, the signal amplifier works with DMX decoder to expand DMX signals in parallel up to 100m (328ft) range.
Outdoor DMX 512 Decoder HUEDA H-2102B(W)
H-2102B(W) is the water resistant standard DMX512 compliant control interface, allows you to set DMX address via digital numeric display. Compatible with DMX Master HUEDA™.
5 Channel DMX512 8-16 bit Color Decoder Pro Series H-DMX2108A-5M-3
Multiple Zone Control DMX decoder to control multiple RGB-W strips as one. Converts analog signal to universal standard DMX512/1990. Uses 5 channels with 256 shades of brightness.
Product Accessories
L Connector for RGB Strip RGBL10MM
RGBL10MM RGB Strip 10mm L shape corner Connector. This connector is only compatible with Type A RGB Flex Strip (No coating or cover). Each connection (up to 2 for this connector) must be made with the RGB10W0 Splice Connector. Low voltage use only, max 4 Amps.
RGB 2464 Wire – 16.4ft (5m) length
Low voltage 20 Gauge / Meter cord. Comes in 16.40 feet length. RGB Power cord with pigtail wires on both ends
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.