$2.75 1   1-800-387-4081

Product Description

The new 2.9 Watt/ft Side emitting strip features 3014 Epistar SMD LEDs. Low voltage (12VDC) Side emitting LED lighting comes in a flexible ultra sleek thin PCB strip. IP22 rated type A Flex Strip is suitable for dry locations. Side emitting LED Strip available in pure white (5200K) and comes in 5m (16.4ft) roll.

Side Emitting LED Strip shines light out to one side of the Flex Strip, rather than straight up. This means that it can be concealed yet still illuminate something from the side. Ideal for creating lighted channel letters such that the lighting emits from the side rather than standard strips that emit light from the surface top.

Like our other LED Flex Strips, Side emitting strip has a 3M tape backing for easy installation. Cut-able LED Strip to size at each 3 LED intervals at marking points.

Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible. Easily mountable LED Strip onto clean dry surfaces free of burrows. Its small size and low voltage makes this lighting ideal for a wide range of applications.

Note: This product requires an optional Class 2 Power Supply (not included).

Note: Accessories are not included with this product. See Accessories tab above


Features

Side Emitting 3014 Epistar SMD LEDs
LM-80 tested
CRI>90
Low power consumption and little heat generated
Dimmable and Trimmable at every 3 LEDs
Flexible LED light strips
Continuous length
Solid-state, high vibration resistant
Use in Channel letters

Technical Specifications

Watt foot2.9 Watts/ft
Max Voltage12 VDC (Regulated/Class 2)
AMPs/Roll4 Amps
Brightness210-220 lumens / ft
CRI>90
Roll Size5 Meters (16.4 Feet)
LED Type3014 SMD (Super Bright Series)
Light Source120pcs/meter  3014 SMD LED
Dimensions5000(L) x 8(W) x 2(H)mm (16.4′ x 0.31″ x 0.07″)
LED Angle120°
Bend RadiusMax 50 mm (2”) on one Flat plane Axis
Lamp Life>25,000 hours estimated average*
IP RatingIP22 Type A
Operating Temperature-25°C ~ +40°C (-13°F ~ 104°F)

Dimmable LED Drivers

  • New Sale!

    60W 12VDC Class 2 Dimmable LED Driver MD-012-060VTH

    Max Continuous Load60 W
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Multi-Dim series is compatible with Forward phase, Magnetic low voltage, ELV and Triac dimmers
    $89.75 $81.00 Add to cart More Info
  • Sale!

    60W 12VDC Class 2 Dimmable Driver E60L12DC-KO

    Voltage12 VDC Output / 120 VAC 60Hz Input
    Total Wattage60W max
    Power Supply TypeClass 2 Electronic Dimmable
    Compatible with Magnetic low voltage rated Triac dimmers
    $87.00 $79.00 Add to cart More Info
  • 45W 12VDC Class 2 LED Dimmable Driver MD45W12VA

    Max Continuous Load45 W
    Voltage12 VDC Output / 110~120 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Compatible with Forward phase, Magnetic low voltage and Triac dimmers
    $77.75 Out of Stock More Info
  • New Sale!

    180W (3x60W) 12VDC Class 2 Dimmable LED Driver MD-012-180VTHJ

    Max Continuous Load180W (3 x 60W)
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Multi-Dim series is compatible with Forward phase, Magnetic low voltage and Triac dimmers
    $229.00 $206.25 Add to cart More Info
  • New

    50W 0-10V Dimmable Class 2 Driver CVD50L12DC

    Voltage12 VDC Output / 120~277 VAC Input
    Power Supply Type0-10V Dimmable Class 2
    IP RatingIP65 (Suitable for Indoor/Outdoor use)
  • New

    30W 12VDC Class 2 Dimmable LED Driver MD-012-030VTH

    Max Continuous Load30 W
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Multi-Dim series is compatible with Forward phase, Magnetic low voltage, ELV and Triac dimmers
  • 24W 12VDC Class 2 LED Dimmable Driver MD-012-024VT

    Max Continuous Load24 W
    Voltage12 VDC Output / 100~130 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Multi-Dim series is compatible with Forward phase, Magnetic low voltage and Triac dimmers

  • Regulated LED Drivers


  • 200W 12VDC Class 2 LED Power Supply XLD200B-412V-FC

    Voltage12 VDC Output / 90~277 VAC Input
    Power Supply TypeRegulated Class 2
    IP RatingIP65 (Indoor or Outdoor use)
    Warranty3 Years
  • 75W 12VDC Class 2 LED Power Supply XLD75B-112V-FC

    Voltage12 VDC Output / 90~277 VAC Input
    Power Supply TypeRegulated Class 2
    IP RatingIP65 (Indoor or Outdoor use)
    Warranty3 Years
  • New

    60W 12VDC Class 2 LED Power Supply YHY-12005000

    Max Continuous Load60 W (48 W continuous)
    Voltage12 VDC Output / 100~240 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Comes with barrel type connector for easy plug in and connect
    $26.50$29.50 Select options
    More Info
  • New

    50W 12VDC Class 2 Driver CVN50L12DC

    Voltage12 VDC Output / 120~277 VAC Input
    Power Supply TypeRegulated Class 2
    IP RatingIP65 (Suitable for Indoor/Outdoor use)
    Warranty5 Years
  • Product Accessories

  • New

    WAGO 221-412 Splicing Connector

    WAGO’s 221-412  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • H05-415 Wago Cable Connector

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

  • LED Low Voltage Mini Dimmer DIM-2430A

    Max Voltage12V~24VDC (Class 2 regulated)
    Output1 channel 30-Amps (peak)
    DimensionL 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H)
    Brightness0% to 100%
  • Reviews

    There are no reviews yet.

    Be the first to review “12VDC Side Emitting 5200K LED Strip light FA120M30-5M-12V-W”

    Your email address will not be published. Required fields are marked *

    Product Description

    The new 2.9 Watt/ft Side emitting strip features 3014 Epistar SMD LEDs. Low voltage (12VDC) Side emitting LED lighting comes in a flexible ultra sleek thin PCB strip. IP22 rated type A Flex Strip is suitable for dry locations. Side emitting LED Strip available in pure white (5200K) and comes in 5m (16.4ft) roll.

    Side Emitting LED Strip shines light out to one side of the Flex Strip, rather than straight up. This means that it can be concealed yet still illuminate something from the side. Ideal for creating lighted channel letters such that the lighting emits from the side rather than standard strips that emit light from the surface top.

    Like our other LED Flex Strips, Side emitting strip has a 3M tape backing for easy installation. Cut-able LED Strip to size at each 3 LED intervals at marking points.

    Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible. Easily mountable LED Strip onto clean dry surfaces free of burrows. Its small size and low voltage makes this lighting ideal for a wide range of applications.

    Note: This product requires an optional Class 2 Power Supply (not included).

    Note: Accessories are not included with this product. See Accessories tab above


    Features

    Side Emitting 3014 Epistar SMD LEDs
    LM-80 tested
    CRI>90
    Low power consumption and little heat generated
    Dimmable and Trimmable at every 3 LEDs
    Flexible LED light strips
    Continuous length
    Solid-state, high vibration resistant
    Use in Channel letters

    Technical Specifications

    Watt foot2.9 Watts/ft
    Max Voltage12 VDC (Regulated/Class 2)
    AMPs/Roll4 Amps
    Brightness210-220 lumens / ft
    CRI>90
    Roll Size5 Meters (16.4 Feet)
    LED Type3014 SMD (Super Bright Series)
    Light Source120pcs/meter  3014 SMD LED
    Dimensions5000(L) x 8(W) x 2(H)mm (16.4′ x 0.31″ x 0.07″)
    LED Angle120°
    Bend RadiusMax 50 mm (2”) on one Flat plane Axis
    Lamp Life>25,000 hours estimated average*
    IP RatingIP22 Type A
    Operating Temperature-25°C ~ +40°C (-13°F ~ 104°F)

    Dimmable LED Drivers

  • New Sale!

    60W 12VDC Class 2 Dimmable LED Driver MD-012-060VTH

    Max Continuous Load60 W
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Multi-Dim series is compatible with Forward phase, Magnetic low voltage, ELV and Triac dimmers
    $89.75 $81.00 Add to cart More Info
  • Sale!

    60W 12VDC Class 2 Dimmable Driver E60L12DC-KO

    Voltage12 VDC Output / 120 VAC 60Hz Input
    Total Wattage60W max
    Power Supply TypeClass 2 Electronic Dimmable
    Compatible with Magnetic low voltage rated Triac dimmers
    $87.00 $79.00 Add to cart More Info
  • 45W 12VDC Class 2 LED Dimmable Driver MD45W12VA

    Max Continuous Load45 W
    Voltage12 VDC Output / 110~120 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Compatible with Forward phase, Magnetic low voltage and Triac dimmers
    $77.75 Out of Stock More Info
  • New Sale!

    180W (3x60W) 12VDC Class 2 Dimmable LED Driver MD-012-180VTHJ

    Max Continuous Load180W (3 x 60W)
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Multi-Dim series is compatible with Forward phase, Magnetic low voltage and Triac dimmers
    $229.00 $206.25 Add to cart More Info
  • New

    50W 0-10V Dimmable Class 2 Driver CVD50L12DC

    Voltage12 VDC Output / 120~277 VAC Input
    Power Supply Type0-10V Dimmable Class 2
    IP RatingIP65 (Suitable for Indoor/Outdoor use)
  • New

    30W 12VDC Class 2 Dimmable LED Driver MD-012-030VTH

    Max Continuous Load30 W
    Voltage12 VDC Output / 100~277 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Multi-Dim series is compatible with Forward phase, Magnetic low voltage, ELV and Triac dimmers
  • 24W 12VDC Class 2 LED Dimmable Driver MD-012-024VT

    Max Continuous Load24 W
    Voltage12 VDC Output / 100~130 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Multi-Dim series is compatible with Forward phase, Magnetic low voltage and Triac dimmers

  • Regulated LED Drivers


  • 200W 12VDC Class 2 LED Power Supply XLD200B-412V-FC

    Voltage12 VDC Output / 90~277 VAC Input
    Power Supply TypeRegulated Class 2
    IP RatingIP65 (Indoor or Outdoor use)
    Warranty3 Years
  • 75W 12VDC Class 2 LED Power Supply XLD75B-112V-FC

    Voltage12 VDC Output / 90~277 VAC Input
    Power Supply TypeRegulated Class 2
    IP RatingIP65 (Indoor or Outdoor use)
    Warranty3 Years
  • New

    60W 12VDC Class 2 LED Power Supply YHY-12005000

    Max Continuous Load60 W (48 W continuous)
    Voltage12 VDC Output / 100~240 VAC Input
    Power Supply TypeRegulated Class 2 (Indoor use)
    Comes with barrel type connector for easy plug in and connect
    $26.50$29.50 Select options
    More Info
  • New

    50W 12VDC Class 2 Driver CVN50L12DC

    Voltage12 VDC Output / 120~277 VAC Input
    Power Supply TypeRegulated Class 2
    IP RatingIP65 (Suitable for Indoor/Outdoor use)
    Warranty5 Years
  • Product Accessories

  • New

    WAGO 221-412 Splicing Connector

    WAGO’s 221-412  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-413 Splicing Connector

    WAGO’s 221-413  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • WAGO 221-415 Splicing Connector

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

  • H05-415 Wago Cable Connector

    Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

  • H05 Power Connector

    Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

  • LED Low Voltage Mini Dimmer DIM-2430A

    Max Voltage12V~24VDC (Class 2 regulated)
    Output1 channel 30-Amps (peak)
    DimensionL 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H)
    Brightness0% to 100%
  • Reviews

    There are no reviews yet.

    Be the first to review “12VDC Side Emitting 5200K LED Strip light FA120M30-5M-12V-W”

    Your email address will not be published. Required fields are marked *

    About Us

    Founded in 1995, LED World is an OEM of LED strip lighting, sign modules, dimmable and regulated Class 2 Power supplies. We supply Electricians, Designers, Electrical Contractors and Manufactures of quality and innovative commercial lighting products. We have a wide range of RGB color changing LED Strips, aluminium profiles, DMX wall washers and color controllers for interior and exterior applications. Most of our products are UL or Intertek listed.

    Connect


    visa   mastercard   discover   paypal  Wildcard SSL Certificates Secure Electronic Payment Processing