1-800-387-4081
$0.00 0 1-800-387-4081
Product Link 
Low Voltage Motion Sensors Switch LN-SPIR-1CH is an infrared low voltage detection sensor switch that use of infrared detection to turn on/off low voltage LED lighting (12/24VDC). As a person approaches the sensor within 16 feet (5 meter) area, the sensor acts as a switch to turn on the attached optional LED lighting. After a person leaves the sensor area, the Motion Sensors Switch will turn off automatically according to the set time delay (1 to 10 Minutes).
Note: For use only with Low voltage Class 2 Regulated LED Driver Models.
Features
| Motion Sensors Switch (Human body infrared sensor) |
| Dimension: L76 X W35 X H34 mm (2.99″ x 1.37″ x 1.33″) |
| Detection distance area: 16 feet (5 meter) |
| Compatible 12/24VDC LED lighting fixture and class 2 regulated power driver |
Motion Sensors Switch Wiring Diagram
Directions for Use
| Turn power off before connecting lighting or power source. Please carefully check that the wire attached to the screw terminal are screwed in tight to avoid short-circuit between connecting wires |
| Use the setting knob at the back of the controller to set the delay time (1 to 10 Minutes) to turn off after a person is away from the area. |
| The controller signal output line and input line should be connected with the correct polarity. Do NOT exceed 5 amps of power source. |
Product Description
Low Voltage Motion Sensors Switch LN-SPIR-1CH is an infrared low voltage detection sensor switch that use of infrared detection to turn on/off low voltage LED lighting (12/24VDC). As a person approaches the sensor within 16 feet (5 meter) area, the sensor acts as a switch to turn on the attached optional LED lighting. After a person leaves the sensor area, the Motion Sensors Switch will turn off automatically according to the set time delay (1 to 10 Minutes).
Note: For use only with Low voltage Class 2 Regulated LED Driver Models.
Features
| Motion Sensors Switch (Human body infrared sensor) |
| Dimension: L76 X W35 X H34 mm (2.99″ x 1.37″ x 1.33″) |
| Detection distance area: 16 feet (5 meter) |
| Compatible 12/24VDC LED lighting fixture and class 2 regulated power driver |
Motion Sensors Switch Wiring Diagram
Directions for Use
| Turn power off before connecting lighting or power source. Please carefully check that the wire attached to the screw terminal are screwed in tight to avoid short-circuit between connecting wires |
| Use the setting knob at the back of the controller to set the delay time (1 to 10 Minutes) to turn off after a person is away from the area. |
| The controller signal output line and input line should be connected with the correct polarity. Do NOT exceed 5 amps of power source. |
Technical Specifications
| Voltage | 12/24VDC Class 2 regulated power source |
| Output | 1 Channel |
| Detection Distance Area | 5 meter (16.4ft) |
| Approach Angle | 60 degrees |
| Output Current | <5A |
| Time Delay | 1-10 min (adjustable) |
| Dimension | Indoor use only (dry location) |
| Operating Environment | -20°C~ 60°C (-4°F ~ 140°F) indoor use only (dry location) |
12VDC Power Driver
New
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
New Sale!
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
200W 12VDC Class 2 LED Power Supply XLD200B-412V-FC
| Voltage | 12 VDC Output / 90~277 VAC Input |
| Power Supply Type | Regulated Class 2 |
| IP Rating | IP65 (Indoor or Outdoor use) |
| Warranty | 3 Years |
New
60W 12VDC Class 2 LED Power Supply YHY-12005000
| Max Continuous Load | 60 W (48 W continuous) |
| Voltage | 12 VDC Output / 100~240 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Comes with barrel type connector for easy plug in and connect
New
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
75W 12VDC Class 2 LED Power Supply XLD75B-112V-FC
| Voltage | 12 VDC Output / 90~277 VAC Input |
| Power Supply Type | Regulated Class 2 |
| IP Rating | IP65 (Indoor or Outdoor use) |
| Warranty | 3 Years |
24VDC Power Driver
New
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
New Sale!
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
New
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Comes with barrel connector for easy plug in and connect
New Sale!
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
200W 24VDC Class 2 LED Power Supply XLD200B-224V-FC
| Voltage | 24 VDC Output / 90~277 VAC Input |
| Power Supply Type | Regulated Class 2 |
| IP Rating | IP65 (Indoor or Outdoor use) |
| Warranty | 3 Years |
New
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
New
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
Product Description
Low Voltage Motion Sensors Switch LN-SPIR-1CH is an infrared low voltage detection sensor switch that use of infrared detection to turn on/off low voltage LED lighting (12/24VDC). As a person approaches the sensor within 16 feet (5 meter) area, the sensor acts as a switch to turn on the attached optional LED lighting. After a person leaves the sensor area, the Motion Sensors Switch will turn off automatically according to the set time delay (1 to 10 Minutes).
Note: For use only with Low voltage Class 2 Regulated LED Driver Models.
Features
| Motion Sensors Switch (Human body infrared sensor) |
| Dimension: L76 X W35 X H34 mm (2.99″ x 1.37″ x 1.33″) |
| Detection distance area: 16 feet (5 meter) |
| Compatible 12/24VDC LED lighting fixture and class 2 regulated power driver |
Motion Sensors Switch Wiring Diagram
Directions for Use
| Turn power off before connecting lighting or power source. Please carefully check that the wire attached to the screw terminal are screwed in tight to avoid short-circuit between connecting wires |
| Use the setting knob at the back of the controller to set the delay time (1 to 10 Minutes) to turn off after a person is away from the area. |
| The controller signal output line and input line should be connected with the correct polarity. Do NOT exceed 5 amps of power source. |
Technical Specifications
| Voltage | 12/24VDC Class 2 regulated power source |
| Output | 1 Channel |
| Detection Distance Area | 5 meter (16.4ft) |
| Approach Angle | 60 degrees |
| Output Current | <5A |
| Time Delay | 1-10 min (adjustable) |
| Dimension | Indoor use only (dry location) |
| Operating Environment | -20°C~ 60°C (-4°F ~ 140°F) indoor use only (dry location) |
12VDC Power Driver
New
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
New Sale!
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
200W 12VDC Class 2 LED Power Supply XLD200B-412V-FC
| Voltage | 12 VDC Output / 90~277 VAC Input |
| Power Supply Type | Regulated Class 2 |
| IP Rating | IP65 (Indoor or Outdoor use) |
| Warranty | 3 Years |
New
60W 12VDC Class 2 LED Power Supply YHY-12005000
| Max Continuous Load | 60 W (48 W continuous) |
| Voltage | 12 VDC Output / 100~240 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Comes with barrel type connector for easy plug in and connect
New
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
75W 12VDC Class 2 LED Power Supply XLD75B-112V-FC
| Voltage | 12 VDC Output / 90~277 VAC Input |
| Power Supply Type | Regulated Class 2 |
| IP Rating | IP65 (Indoor or Outdoor use) |
| Warranty | 3 Years |
24VDC Power Driver
New
30W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
New Sale!
60W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
New
96W 24VDC Class 2 LED Power Supply with Plug
| Max Continuous Load | 96 W (77 W continuous) |
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
Comes with barrel connector for easy plug in and connect
New Sale!
96W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-096VTDHV2
| Max Continuous Load | 96 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
200W 24VDC Class 2 LED Power Supply XLD200B-224V-FC
| Voltage | 24 VDC Output / 90~277 VAC Input |
| Power Supply Type | Regulated Class 2 |
| IP Rating | IP65 (Indoor or Outdoor use) |
| Warranty | 3 Years |
New
192W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-192VTD52JV2
| Max Continuous Load | 192W (2 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
New
288W 24VDC Class 2 Triac/0-10V Dimmable LED Driver MD-024-288VTD52JV2
| Max Continuous Load | 288W (3 Tap x 96W) |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
5 in 1 series is compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.