1-800-387-4081
$0.00 0 1-800-387-4081
Alpha XLD series Class 2 200 watt 16.6 Amp LED Power Supply is the industry’s only UL Listed regulated LED driver. As a standalone unit, this unique patented, conduit ready, LED power supply will enable complete installation of your system without having to install external junction boxes, saving you invaluable time and money in installation and approvals. Suitable for wet location use.
Efficient, Reliable and easy to install, the XLD200 Class 2 LED Power Supply (200 Watt power rating, 16.6 amps) is fully potted and can work in extremely low temperature environments (-40°C – 60°C).
This unit is actually 4 x 50 Watt power supplies in one box, all Class 2. While the total wattage rating is 200 Watts, it is important to note that it is not one 200 Watt Power Supply (with one output) but rather 4 power supplies of 50 Watts each.
This unit features universal input range of 90-277 VAC and its user-friendly output voltage/current adjust pots allow you to easily tune the unit to drive your system at the appropriate power levels enabling flexibility and compatibility with a wide variety of indoor/outdoor LED lighting that are constant volts 12VDC.
Not for use with a Low Voltage Magnetic (120V AC) dimmer switch
GRE Alpha’s Easy-Install XLD Series is the industry’s only integrated UL listed Class II solution on the market. Boasting universal AC input, integral wiring compartments for reduced installation costs, constant current and constant voltage dual-mode operation for flexibility and optimal performance, the XLD Series offers up to 92 percent efficiency and heavy-duty design for harsh environments. Other features include user-adjustable output voltage and current, 1-10V dimming options with SLD SmartDim series dimming modules, active power factor correction at PF>0.9, up to four output channels, built-in protection (SCP, OTP, OVP, OCP), IP 65 standalone enclosure, and UL/CUL listed Class 1 and 2, CE, FCC Title 47 CFR 15 Class B, CQU certifications.
Features
| Input Voltage: 90-277 VAC |
| Output Voltage: Full Load 12V 4×50 watt outputs, DC 16.6 amps max |
| Over Current Protection |
| Over Voltage Protection |
| IP 65 / (UL standard/CSA Standards) |
| Indoor or Outdoor use |
| Remote Dimming Options |
| 3 Years Limited Factory Warranty |
Product Description
Alpha XLD series Class 2 200 watt 16.6 Amp LED Power Supply is the industry’s only UL Listed regulated LED driver. As a standalone unit, this unique patented, conduit ready, LED power supply will enable complete installation of your system without having to install external junction boxes, saving you invaluable time and money in installation and approvals. Suitable for wet location use.
Efficient, Reliable and easy to install, the XLD200 Class 2 LED Power Supply (200 Watt power rating, 16.6 amps) is fully potted and can work in extremely low temperature environments (-40°C – 60°C).
This unit is actually 4 x 50 Watt power supplies in one box, all Class 2. While the total wattage rating is 200 Watts, it is important to note that it is not one 200 Watt Power Supply (with one output) but rather 4 power supplies of 50 Watts each.
This unit features universal input range of 90-277 VAC and its user-friendly output voltage/current adjust pots allow you to easily tune the unit to drive your system at the appropriate power levels enabling flexibility and compatibility with a wide variety of indoor/outdoor LED lighting that are constant volts 12VDC.
Not for use with a Low Voltage Magnetic (120V AC) dimmer switch
GRE Alpha’s Easy-Install XLD Series is the industry’s only integrated UL listed Class II solution on the market. Boasting universal AC input, integral wiring compartments for reduced installation costs, constant current and constant voltage dual-mode operation for flexibility and optimal performance, the XLD Series offers up to 92 percent efficiency and heavy-duty design for harsh environments. Other features include user-adjustable output voltage and current, 1-10V dimming options with SLD SmartDim series dimming modules, active power factor correction at PF>0.9, up to four output channels, built-in protection (SCP, OTP, OVP, OCP), IP 65 standalone enclosure, and UL/CUL listed Class 1 and 2, CE, FCC Title 47 CFR 15 Class B, CQU certifications.
Features
| Input Voltage: 90-277 VAC |
| Output Voltage: Full Load 12V 4×50 watt outputs, DC 16.6 amps max |
| Over Current Protection |
| Over Voltage Protection |
| IP 65 / (UL standard/CSA Standards) |
| Indoor or Outdoor use |
| Remote Dimming Options |
| 3 Years Limited Factory Warranty |
Technical Specifications
| Power | 4 x 50 W |
| Output Voltage | Full Load 12V DC |
| Input Voltage | 90-277 VAC, 200 W |
| Protection | Over Current & Voltage Protection |
| IP Rating | IP 65 / (UL standard/CSA listed) |
| Usage | Indoor / Outdoor use |
| Size | L 312mm x W 113.5mm x H 60.5mm (L12.28″ x W4.46″ x H2.38″) |
| Dimming Options | Remote Dimming Options |
| Warranty | 3 Years Limited Factory Warranty |
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
610 Connector Wire 20AWG – 5m (16.4ft) long 6102051TFT4
Low voltage UL/CSA listed 610 Wire 20 Gauge / Meter. Comes in 16.40 feet length. Low voltage two end pigtail wire.
0-10V LED Dimmer module SLD-DIM-1B
| Input Range | 8-30 VDC |
| Input Current | 5.1A max |
| Output Freq | 1kHz PWM |
| Output Current | 5.1 max at full load |
Product Description
Alpha XLD series Class 2 200 watt 16.6 Amp LED Power Supply is the industry’s only UL Listed regulated LED driver. As a standalone unit, this unique patented, conduit ready, LED power supply will enable complete installation of your system without having to install external junction boxes, saving you invaluable time and money in installation and approvals. Suitable for wet location use.
Efficient, Reliable and easy to install, the XLD200 Class 2 LED Power Supply (200 Watt power rating, 16.6 amps) is fully potted and can work in extremely low temperature environments (-40°C – 60°C).
This unit is actually 4 x 50 Watt power supplies in one box, all Class 2. While the total wattage rating is 200 Watts, it is important to note that it is not one 200 Watt Power Supply (with one output) but rather 4 power supplies of 50 Watts each.
This unit features universal input range of 90-277 VAC and its user-friendly output voltage/current adjust pots allow you to easily tune the unit to drive your system at the appropriate power levels enabling flexibility and compatibility with a wide variety of indoor/outdoor LED lighting that are constant volts 12VDC.
Not for use with a Low Voltage Magnetic (120V AC) dimmer switch
GRE Alpha’s Easy-Install XLD Series is the industry’s only integrated UL listed Class II solution on the market. Boasting universal AC input, integral wiring compartments for reduced installation costs, constant current and constant voltage dual-mode operation for flexibility and optimal performance, the XLD Series offers up to 92 percent efficiency and heavy-duty design for harsh environments. Other features include user-adjustable output voltage and current, 1-10V dimming options with SLD SmartDim series dimming modules, active power factor correction at PF>0.9, up to four output channels, built-in protection (SCP, OTP, OVP, OCP), IP 65 standalone enclosure, and UL/CUL listed Class 1 and 2, CE, FCC Title 47 CFR 15 Class B, CQU certifications.
Features
| Input Voltage: 90-277 VAC |
| Output Voltage: Full Load 12V 4×50 watt outputs, DC 16.6 amps max |
| Over Current Protection |
| Over Voltage Protection |
| IP 65 / (UL standard/CSA Standards) |
| Indoor or Outdoor use |
| Remote Dimming Options |
| 3 Years Limited Factory Warranty |
Technical Specifications
| Power | 4 x 50 W |
| Output Voltage | Full Load 12V DC |
| Input Voltage | 90-277 VAC, 200 W |
| Protection | Over Current & Voltage Protection |
| IP Rating | IP 65 / (UL standard/CSA listed) |
| Usage | Indoor / Outdoor use |
| Size | L 312mm x W 113.5mm x H 60.5mm (L12.28″ x W4.46″ x H2.38″) |
| Dimming Options | Remote Dimming Options |
| Warranty | 3 Years Limited Factory Warranty |
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
610 Connector Wire 20AWG – 5m (16.4ft) long 6102051TFT4
Low voltage UL/CSA listed 610 Wire 20 Gauge / Meter. Comes in 16.40 feet length. Low voltage two end pigtail wire.
0-10V LED Dimmer module SLD-DIM-1B
| Input Range | 8-30 VDC |
| Input Current | 5.1A max |
| Output Freq | 1kHz PWM |
| Output Current | 5.1 max at full load |
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.