1-800-387-4081
New efficient and reliable 30W 12VDC Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming. Wiring Compartments with Knock-Outs for Easy Installation.
Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).
12VDC Class 2 driver MD-012-030VTDHV2 is suitable for indoor and outdoor location use
Universal 120-277VAC Input Voltage for Residential, Commercial and Industrial use.
30W 12VDC Class 2 Dimmable LED Driver Features
| Delivers smooth, stable, flicker-free dimming to 1% (with 0-10V PWM dimming). Smooth Ripple Free Output Voltage |
| When a dimmer is set to full brightness, there is no loss of top-end light output |
| Triac Dimming/Forward and Reverse Phase-Cut Dimming |
| 1~10V, 10V PWM or resistance dimming options |
| No minimum lighting load required for wide range dimming |
| Auto reset protection in case of lighting overload, open-circuit, short-circuit, over-temperature or over voltage |
| cULus listed for dry, damp and wet locations (Indoor/Outdoor use) |
| Meets California Title 24 standard |
| Universal AC input: 100~277 VAC |
| Rated for 30,000 hours at 80% power |
| Constant Voltage Output |
| Power Factor > 0.98 |
| High efficiency > 85% |
| Free Air convection cooling |
| Compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers |
| Suitable for LED lighting and sign lighting applications |
Product Description
New efficient and reliable 30W 12VDC Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming. Wiring Compartments with Knock-Outs for Easy Installation.
Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).
12VDC Class 2 driver MD-012-030VTDHV2 is suitable for indoor and outdoor location use
Universal 120-277VAC Input Voltage for Residential, Commercial and Industrial use.
30W 12VDC Class 2 Dimmable LED Driver Features
| Delivers smooth, stable, flicker-free dimming to 1% (with 0-10V PWM dimming). Smooth Ripple Free Output Voltage |
| When a dimmer is set to full brightness, there is no loss of top-end light output |
| Triac Dimming/Forward and Reverse Phase-Cut Dimming |
| 1~10V, 10V PWM or resistance dimming options |
| No minimum lighting load required for wide range dimming |
| Auto reset protection in case of lighting overload, open-circuit, short-circuit, over-temperature or over voltage |
| cULus listed for dry, damp and wet locations (Indoor/Outdoor use) |
| Meets California Title 24 standard |
| Universal AC input: 100~277 VAC |
| Rated for 30,000 hours at 80% power |
| Constant Voltage Output |
| Power Factor > 0.98 |
| High efficiency > 85% |
| Free Air convection cooling |
| Compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers |
| Suitable for LED lighting and sign lighting applications |
Technical Specifications
| Rated Power | 30W |
| Output Voltage | 12 VDC |
| Input Voltage | 100~277VAC |
| Rated Current | 2.5A |
| Voltage | Regulated |
| Voltage Tolerance | ±0.5 V |
| Voltage Regulation | ±0.5 % |
| Power Factor | 0.98 @ 120VAC, 0.95 @ 277VAC |
| Efficiency | > 83% |
| Operating Temp. | -40°C ~ 60°C (-40°F ~ 140°F) Indoor use |
| Size | L 6.49″ (165mm) x W 3.54″ (90mm) x H 1.57″ (40mm) |
| Certifications | cULus Listed |
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Product Description
New efficient and reliable 30W 12VDC Class 2 Triac/0-10V dimmable LED Driver that uses a integrated microprocessor that automatically senses and optimizes dimming performance for a smooth flicker free dimming. Wiring Compartments with Knock-Outs for Easy Installation.
Compatible with Forward phase, Magnetic low voltage, ELV, Triac and 0-10V Dimmers (see compatibility list of dimmers).
12VDC Class 2 driver MD-012-030VTDHV2 is suitable for indoor and outdoor location use
Universal 120-277VAC Input Voltage for Residential, Commercial and Industrial use.
30W 12VDC Class 2 Dimmable LED Driver Features
| Delivers smooth, stable, flicker-free dimming to 1% (with 0-10V PWM dimming). Smooth Ripple Free Output Voltage |
| When a dimmer is set to full brightness, there is no loss of top-end light output |
| Triac Dimming/Forward and Reverse Phase-Cut Dimming |
| 1~10V, 10V PWM or resistance dimming options |
| No minimum lighting load required for wide range dimming |
| Auto reset protection in case of lighting overload, open-circuit, short-circuit, over-temperature or over voltage |
| cULus listed for dry, damp and wet locations (Indoor/Outdoor use) |
| Meets California Title 24 standard |
| Universal AC input: 100~277 VAC |
| Rated for 30,000 hours at 80% power |
| Constant Voltage Output |
| Power Factor > 0.98 |
| High efficiency > 85% |
| Free Air convection cooling |
| Compatible with Forward phase, Magnetic low voltage, Triac and 0-10V dimmers |
| Suitable for LED lighting and sign lighting applications |
Technical Specifications
| Rated Power | 30W |
| Output Voltage | 12 VDC |
| Input Voltage | 100~277VAC |
| Rated Current | 2.5A |
| Voltage | Regulated |
| Voltage Tolerance | ±0.5 V |
| Voltage Regulation | ±0.5 % |
| Power Factor | 0.98 @ 120VAC, 0.95 @ 277VAC |
| Efficiency | > 83% |
| Operating Temp. | -40°C ~ 60°C (-40°F ~ 140°F) Indoor use |
| Size | L 6.49″ (165mm) x W 3.54″ (90mm) x H 1.57″ (40mm) |
| Certifications | cULus Listed |
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.