1-800-387-4081
$0.00 0 1-800-387-4081
New Multi-Dim Class 2 45W 12VDC Regulated LED Driver. The MD45W12VA features outstanding LED dimming performance for architectural-quality brightness control. It has wide range dimmer compatibility. Lightweight, compact size, wall mountable power supply for use in indoor and outdoor (with optional wet location enclosure) locations. LED driver features an integrated microprocessor that automatically senses and optimizes dimming performance based on the load and type of dimming technology being used.
Features
| Delivers smooth, stable, flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance |
| When a dimmer is set to full brightness there is no loss of top-end light output |
| No minimum lighting load required for wide range dimming |
| Auto reset protection in case of lighting overload, open-circuit, short-circuit, over-temperature or over voltage |
| No de-rating, load up to 100% of the model’s rated capacity |
| For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch |
| Compatible with both single color and RGB color-changing LED Lighting |
| Direct wire or plug-in configuration |
| Class 2 power unit with Class II AC inputs, fully isolated case –no ground wire is required |
| Rated for 30,000 hours when at 100% power, 24 hours a day, 50,000 hours if only on 8~12 hours a day |
| For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch |
| ETL listed for dry or damp locations. (Indoor use only) |
Compatible dimmers and lighting controls
| Legacy incandescent standard phase TRIAC dimmers |
| Electronic ELV reverse phase trailing edge dimmers |
| Magnetic, Low-Voltage (MLV) leading edge dimmers |
| 12VDC low-voltage Pulse Width Modulation (PWM) dimmers |
Product Description
New Multi-Dim Class 2 45W 12VDC Regulated LED Driver. The MD45W12VA features outstanding LED dimming performance for architectural-quality brightness control. It has wide range dimmer compatibility. Lightweight, compact size, wall mountable power supply for use in indoor and outdoor (with optional wet location enclosure) locations. LED driver features an integrated microprocessor that automatically senses and optimizes dimming performance based on the load and type of dimming technology being used.
Features
| Delivers smooth, stable, flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance |
| When a dimmer is set to full brightness there is no loss of top-end light output |
| No minimum lighting load required for wide range dimming |
| Auto reset protection in case of lighting overload, open-circuit, short-circuit, over-temperature or over voltage |
| No de-rating, load up to 100% of the model’s rated capacity |
| For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch |
| Compatible with both single color and RGB color-changing LED Lighting |
| Direct wire or plug-in configuration |
| Class 2 power unit with Class II AC inputs, fully isolated case –no ground wire is required |
| Rated for 30,000 hours when at 100% power, 24 hours a day, 50,000 hours if only on 8~12 hours a day |
| For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch |
| ETL listed for dry or damp locations. (Indoor use only) |
Compatible dimmers and lighting controls
| Legacy incandescent standard phase TRIAC dimmers |
| Electronic ELV reverse phase trailing edge dimmers |
| Magnetic, Low-Voltage (MLV) leading edge dimmers |
| 12VDC low-voltage Pulse Width Modulation (PWM) dimmers |
Technical Specifications
| Power | 45 Watts |
| Output Voltage | 12 VDC Constant Voltage, 45W, 3.75A Max |
| Input Voltage | 110-120V AC |
| Voltage | Regulated |
| Size | L 7.06″ (179.32mm) x W 2.37″ (60.1mm) x H 1″ (25.4mm) |
| Certifications | ETL Listed |
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Lutron DVLV-600P Magnetic Dimmable Switch
Lutron DVLV-600P Magnetic Dimmable Switch easily turn the lights on, off and dim. While the lights are on, use the sleek slide control to adjust lights to your perfect level.
1 review for 45W 12VDC Class 2 LED Dimmable Driver MD45W12VA
Product Description
New Multi-Dim Class 2 45W 12VDC Regulated LED Driver. The MD45W12VA features outstanding LED dimming performance for architectural-quality brightness control. It has wide range dimmer compatibility. Lightweight, compact size, wall mountable power supply for use in indoor and outdoor (with optional wet location enclosure) locations. LED driver features an integrated microprocessor that automatically senses and optimizes dimming performance based on the load and type of dimming technology being used.
Features
| Delivers smooth, stable, flicker-free dimming with soft start and desirable fade-on and fade-to-dark performance |
| When a dimmer is set to full brightness there is no loss of top-end light output |
| No minimum lighting load required for wide range dimming |
| Auto reset protection in case of lighting overload, open-circuit, short-circuit, over-temperature or over voltage |
| No de-rating, load up to 100% of the model’s rated capacity |
| For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch |
| Compatible with both single color and RGB color-changing LED Lighting |
| Direct wire or plug-in configuration |
| Class 2 power unit with Class II AC inputs, fully isolated case –no ground wire is required |
| Rated for 30,000 hours when at 100% power, 24 hours a day, 50,000 hours if only on 8~12 hours a day |
| For large area lighting brightness control, connect multiple LED Drivers to a single 120VAC dimmer switch |
| ETL listed for dry or damp locations. (Indoor use only) |
Compatible dimmers and lighting controls
| Legacy incandescent standard phase TRIAC dimmers |
| Electronic ELV reverse phase trailing edge dimmers |
| Magnetic, Low-Voltage (MLV) leading edge dimmers |
| 12VDC low-voltage Pulse Width Modulation (PWM) dimmers |
Technical Specifications
| Power | 45 Watts |
| Output Voltage | 12 VDC Constant Voltage, 45W, 3.75A Max |
| Input Voltage | 110-120V AC |
| Voltage | Regulated |
| Size | L 7.06″ (179.32mm) x W 2.37″ (60.1mm) x H 1″ (25.4mm) |
| Certifications | ETL Listed |
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Lutron DVLV-600P Magnetic Dimmable Switch
Lutron DVLV-600P Magnetic Dimmable Switch easily turn the lights on, off and dim. While the lights are on, use the sleek slide control to adjust lights to your perfect level.
1 review for 45W 12VDC Class 2 LED Dimmable Driver MD45W12VA
The products are as good as any name brand. What makes our decision to use this company from now on is the customer service they provide, IMPECABLE!!!! They review the order as you make it online and if two items do not work together, they call you with in minutes of placing your order to clarify what you need and correct the order before they ship. THAT’S NOT ALL!!! We placed our order on a Friday evening about 5 pm and we received Saturday morning, from Canada and shipping was only about $24.00!!
The best yet!!
Thank you Gentlemen, We will refer you to everybodyFurniture Quality Custom Cabinet Manufacturer
Tammy (verified owner) –
The products are as good as any name brand. What makes our decision to use this company from now on is the customer service they provide, IMPECABLE!!!! They review the order as you make it online and if two items do not work together, they call you with in minutes of placing your order to clarify what you need and correct the order before they ship. THAT’S NOT ALL!!! We placed our order on a Friday evening about 5 pm and we received Saturday morning, from Canada and shipping was only about $24.00!!
The best yet!!
Thank you Gentlemen, We will refer you to everybody
Furniture Quality Custom Cabinet Manufacturer