Your cart is currently empty!
The 90W DriveTone LED driver utilizes a wireless signal. It requires only the same wire set as a standard LED Driver, reducing labor time and installation cost. Providing smooth, dimming down to 0.1% before total darkness, and softly tuning white color temperature.
This UL listed Class 2 Driver line has an integrated junction box with a separate input and output wiring compartment each with three ⅞” knockouts for easy and safe installation.
Smooth Color Temperature Control |
No Extra Components Necessary |
UL Listed Class 2 |
Superior Flicker-Free Dimming to 0.1% |
No Compatibility Issues |
Current Limit Overload Protection |
Auto-Reset Short Circuits Protection |
Max Continuous Load | 90 W |
Voltage | 24 VDC Output / 100~277 VAC Input |
Rated Current | 3.75A |
$129.00
The 90W DriveTone LED driver utilizes a wireless signal. It requires only the same wire set as a standard LED Driver, reducing labor time and installation cost. Providing smooth, dimming down to 0.1% before total darkness, and softly tuning white color temperature.
This UL listed Class 2 Driver line has an integrated junction box with a separate input and output wiring compartment each with three ⅞” knockouts for easy and safe installation.
Smooth Color Temperature Control |
No Extra Components Necessary |
UL Listed Class 2 |
Superior Flicker-Free Dimming to 0.1% |
No Compatibility Issues |
Current Limit Overload Protection |
Auto-Reset Short Circuits Protection |
Rated Power | 90W |
Rated Current | 3.75A |
Rated Voltage | 24VDC |
No Load Voltage | 25.2VDC |
Voltage Ripple and Noise | 300mV (Vp-p) |
Input Voltage | 120VAC +/- 10% |
Input Frequency | 60Hz |
Power Factor | 0.96 |
Efficiency (Max Load) | 89% |
Over Current | CC Mode |
Short Circuit | Hiccup mode, auto-recovery after short circuit removed |
Size | L 8”(213mm) x W 4.1”(104mm) x H 1.5”(38mm) |
Certifications | cULus Listed |
Reviews
There are no reviews yet.