1-800-387-4081
$0.00 0 1-800-387-4081
96 Watts 24 volt DC Electronic Dimmable Class 2 power supply is now available in a smaller compact in size with separate hardwired compartments for easy install and greater reliability. The E96 electronic transformer can be dimmed a with standard TRIAC wall dimmer switch that is rated for “Low Voltage Magnetic” such as the Lutron DVLV-600P-WH.
Encased in a low profile slim aluminum enclosure makes this a perfect choice for LED panels, Kick Lighting, Bar lighting, LED Strips, LED Cove, LED ascent Lighting and various other commercial and residential LED applications. The KO version includes a wiring compartment to enable easy-installation and eliminates the need of a J-Box.
The E series is UL certified (for use in USA and Canada) and covered by 5-year limited warranty.
While the E96L24DC-KO Class 2 Electronic Dimmable Transformer is rated to handle a maximum of 96 Watts, it is strongly recommended that maximum continuous output does not exceed 78 continuous Watts.
Do not use this transformer with RGB controllers.
List of compatible dimmers for our Dimmable Drivers
Features
| Dimmable with standard TRIAC dimmer switch |
| Slim compact Aluminum case |
| Class 2 |
| UL 8750 |
| Withstands damp and salty conditions |
| Auto-reset protection for short circuits, over-voltage & over-temperature |
| FCC 15 Part 2 |
| 24V DC True RMS |
Applications
| Strip/Tape Lighting |
| Tube Lighting |
| Panels |
| Fixtures |
| Cove Lighting |
| Bar Lighting |
| Kick Lighting |
| Under Cabinet Lighting |
Product Description
96 Watts 24 volt DC Electronic Dimmable Class 2 power supply is now available in a smaller compact in size with separate hardwired compartments for easy install and greater reliability. The E96 electronic transformer can be dimmed a with standard TRIAC wall dimmer switch that is rated for “Low Voltage Magnetic” such as the Lutron DVLV-600P-WH.
Encased in a low profile slim aluminum enclosure makes this a perfect choice for LED panels, Kick Lighting, Bar lighting, LED Strips, LED Cove, LED ascent Lighting and various other commercial and residential LED applications. The KO version includes a wiring compartment to enable easy-installation and eliminates the need of a J-Box.
The E series is UL certified (for use in USA and Canada) and covered by 5-year limited warranty.
While the E96L24DC-KO Class 2 Electronic Dimmable Transformer is rated to handle a maximum of 96 Watts, it is strongly recommended that maximum continuous output does not exceed 78 continuous Watts.
Do not use this transformer with RGB controllers.
List of compatible dimmers for our Dimmable Drivers
Features
| Dimmable with standard TRIAC dimmer switch |
| Slim compact Aluminum case |
| Class 2 |
| UL 8750 |
| Withstands damp and salty conditions |
| Auto-reset protection for short circuits, over-voltage & over-temperature |
| FCC 15 Part 2 |
| 24V DC True RMS |
Applications
| Strip/Tape Lighting |
| Tube Lighting |
| Panels |
| Fixtures |
| Cove Lighting |
| Bar Lighting |
| Kick Lighting |
| Under Cabinet Lighting |
Technical Specifications
| Max. Total Wattage | 96W |
| Output Voltage | 24VDC |
| Input Voltage | 120 V 60 Hz Class 2 |
| Efficiency | >90% |
| Operating Temperature | -30°C~70°C (-22°F~158°F) |
Can be dimmed VIA hardwire with a magnetic dimmer rated for low voltage magnetic with zero voltage when off (please see instructions enclosed for further important information). Tested with Lutron DVLV-600P (or MFG Part # : DVLV-600PH-WH) Dimmer
LED Driver Installation
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
610 Connector Wire 20AWG – 5m (16.4ft) long 6102051TFT4
Low voltage UL/CSA listed 610 Wire 20 Gauge / Meter. Comes in 16.40 feet length. Low voltage two end pigtail wire.
Lutron DVLV-600P Magnetic Dimmable Switch
Lutron DVLV-600P Magnetic Dimmable Switch easily turn the lights on, off and dim. While the lights are on, use the sleek slide control to adjust lights to your perfect level.
Product Description
96 Watts 24 volt DC Electronic Dimmable Class 2 power supply is now available in a smaller compact in size with separate hardwired compartments for easy install and greater reliability. The E96 electronic transformer can be dimmed a with standard TRIAC wall dimmer switch that is rated for “Low Voltage Magnetic” such as the Lutron DVLV-600P-WH.
Encased in a low profile slim aluminum enclosure makes this a perfect choice for LED panels, Kick Lighting, Bar lighting, LED Strips, LED Cove, LED ascent Lighting and various other commercial and residential LED applications. The KO version includes a wiring compartment to enable easy-installation and eliminates the need of a J-Box.
The E series is UL certified (for use in USA and Canada) and covered by 5-year limited warranty.
While the E96L24DC-KO Class 2 Electronic Dimmable Transformer is rated to handle a maximum of 96 Watts, it is strongly recommended that maximum continuous output does not exceed 78 continuous Watts.
Do not use this transformer with RGB controllers.
List of compatible dimmers for our Dimmable Drivers
Features
| Dimmable with standard TRIAC dimmer switch |
| Slim compact Aluminum case |
| Class 2 |
| UL 8750 |
| Withstands damp and salty conditions |
| Auto-reset protection for short circuits, over-voltage & over-temperature |
| FCC 15 Part 2 |
| 24V DC True RMS |
Applications
| Strip/Tape Lighting |
| Tube Lighting |
| Panels |
| Fixtures |
| Cove Lighting |
| Bar Lighting |
| Kick Lighting |
| Under Cabinet Lighting |
Technical Specifications
| Max. Total Wattage | 96W |
| Output Voltage | 24VDC |
| Input Voltage | 120 V 60 Hz Class 2 |
| Efficiency | >90% |
| Operating Temperature | -30°C~70°C (-22°F~158°F) |
Can be dimmed VIA hardwire with a magnetic dimmer rated for low voltage magnetic with zero voltage when off (please see instructions enclosed for further important information). Tested with Lutron DVLV-600P (or MFG Part # : DVLV-600PH-WH) Dimmer
LED Driver Installation
Product Accessories
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
610 Connector Wire 20AWG – 5m (16.4ft) long 6102051TFT4
Low voltage UL/CSA listed 610 Wire 20 Gauge / Meter. Comes in 16.40 feet length. Low voltage two end pigtail wire.
Lutron DVLV-600P Magnetic Dimmable Switch
Lutron DVLV-600P Magnetic Dimmable Switch easily turn the lights on, off and dim. While the lights are on, use the sleek slide control to adjust lights to your perfect level.
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.