The LT-932-OLED constant voltage 32-Channel DMX Decoder 3A per Channel is designed for professional use where multiple DMX outputs for LED Strips are required. The LT-932-OLED has multiple connection interface that includes RJ45, 3-pin XLR, 5 pin XLR and terminal block connections for DMX in and out. The terminal block connection also serves as a DMX signal amplifier to ensure data transmission (Cat 5) over long distances. OLED screen with button control for easy setting the DMX address and other operations.
LT-932-OLED DMX Decoder Features
|Converts standard DMX signals to PWM output for driving 12 or 24 VDC LED lighting.|
|32 x 3A channel power rating supports large installations up LED Strips|
|Works with 12V and 24V LED lights.|
|OLED screen with button control for easy access and setting the DMX address|
|Uses universal standard DMX512/1990 with 8bit (256 levels) and 16 bit (65536 levels) grey scale output per channel, 0-100% brightness and various changing effect|
|RDM remote management protocol for the parameters browsing & setting, DMX address setting, equipment recognition operations|
|RJ45, 3-pin XLR, 5-pin XLR and terminal block connections for DMX signal in and out|
|Controls single color, CCT, RGB and RGBW LED fixtures|
|Terminal block DMX output includes a DMX signal amplifier|
|Rugged metal chassis with two sets of terminal screws for low voltage input power (capable of accepting 12 gauge wire)|
Use only with LED World’s Regulated Class 2 power supplies. Do not use with magnetic or electronic dimmable power supply.
Important note: The maximum length of RGB/W LED Flex Strip attached to DMX Decoder should not exceed 20 linear feet (due to voltage drop resulting in color loss).