Your cart is currently empty!
Wireless DMX Transmitter Pen 3-pin Male XLR connector- transmitter.
| Works with LC-512X-F (Receiver) |
| Power Supply included |
| Ready to use right out of the box |
| Turns any DMX Controller into a Wireless DMX Controller |
| Eliminate messy wires! |
Note: A DMX Controller or Decoder required but is not included.
| Standard DMX512-Male XLR connector |
| Transmission without delay and no packet loss |
| Transceiver, auto-switching |
| Three-color LED display working status and parameters, one-touch operation |
| 126 band Automatic frequency hopping, and automatically selects the band without interference, to ensure the reliability of communication |
| 6 group can be set ID code, the user can use a separate wireless network in one place without any interference |
Can operate in following modes.
|
Wireless DMX 3-pin XLR Male connector- Transceiver. LC-512x-M works with H-DMX2108A-5M-3 and transmits signal to LC-512x-F.
$89.00
Wireless DMX Transmitter Pen 3-pin Male XLR connector- transmitter.
| Works with LC-512X-F (Receiver) |
| Power Supply included |
| Ready to use right out of the box |
| Turns any DMX Controller into a Wireless DMX Controller |
| Eliminate messy wires! |
Note: A DMX Controller or Decoder required but is not included.
| Standard DMX512-Male XLR connector |
| Transmission without delay and no packet loss |
| Transceiver, auto-switching |
| Three-color LED display working status and parameters, one-touch operation |
| 126 band Automatic frequency hopping, and automatically selects the band without interference, to ensure the reliability of communication |
| 6 group can be set ID code, the user can use a separate wireless network in one place without any interference |
Can operate in following modes.
|
| Power supply (Included) | 5 v DC, 350 mA, via included power unit connected to 100-260 V, 50/60 Hz |
| Carrier frequency | 2.4 GHz ISM band, 78 channels |
| Modulation | GFSK |
| Coverage | 300 m (line-of-sight) |
| Parallel operation | max 6 transmitters |
| DMX connector | 3-pin Male XLR |
| DMX channels | 1 universe (512 channels) |
| Dimensions with antenna | L 212mm x W 18mm x H 18mm |
| Weight | 210 g |
1) DMX512 connector
Transmitter: 3-pin XLR mounting plug
Receiver: 3-pin XLR mounting jack
2) Power input
Plug in the mains cable of the supplied power unit here.
3) Status indicator
Lights permanently red at the transmitter when a DMX signal is being transmitted.
Flashes green at the receiver when a DMX signal being receive.
Shortly flashes red, green and blue after connecting the power supply.
4) Recessed button
To change the transmission channel and pair the devices.
5) Antenna
DMX Decoder for use with Single color, CCT, RGB and RGBW low voltage LED Strips, bars and other LED lighting fixtures. Set the DMX decoder to desired channel (address) to control one or more zones (to control multiple RGB/W strips as one). Uses 32 channels with 65536 levels grey scale output per channel.
Reviews
There are no reviews yet.