Cart $0.00 0 item

Product Description

Deep Red LED Grow Strip and Blue Grow LED have a Nano-meter wavelength. LED Grow Strip is ideal for a specific range Laboratory growth.  Red comes in 660nm and Blue in 450-460nm wavelength.  The LED Grow Strip allows the full optimised LED light Spectrum with minimal light loss while combining the Blue and Red.

LED World’s optional Bendable Channel and Linear adjustable Channel system used for ease of installation. Cut LED Grow strip at marked intervals and shape to create different grow structures. Thus delivers maximum power and precise lighting to areas that are difficult to reach with traditional light fixture.

Moreover, LED Grow strips™ come with lead wires to enable easy connection to the Class 2 LED Power supply. Easily mountable into LED World’s Aluminium Channel profiles. Hence, Its small size and low voltage makes this lighting ideal for a wide range of grow applications. Cut to size by at each 6 LED (24VDC) intervals at marking points for custom length lighting.

The strip comes in 24VDC and produces very little added heat, reducing the cost of cooling. This saves energy over standard HPS lighting solutions and reduces cost of operations in indoor grow operations.

24V Triple Bright LED Grow Light roll comes in 16.4ft (5 meters) length.

Note: This product requires an optional Class 2 regulated Power Supply (not included).

See Accessory tab for further optional drivers

Trademark Notice: LED Grow Strip™ is a registered Trademark of LED World Inc.


Features & Benefits

Shapes and bends to plant with optimized light spectrum. Use optional channel system for custom shapes
Low power consumption and little heat generated
24VDC operation, reduces hazards, UL/CSA Standards, ETL listed (indoor use only).
LED Grow Strip™ seamlessly operates independently or alongside other lighting
Can be cut to length at marked intervals for custom shapes and sizes
IP22 rated for indoor use.

LED Grow Strips™ Red and Blue Graph

Grow Strip spectrum graph

Technical Specifications

Roll Size 5 Meters (16.4 Feet)
Max Voltage 24 VDC (Regulated/Class 2)
Watts/foot 4.4 Watts
AMPs/Roll 3A
Max Current/Ft 185mA
Light Source 60pcs/meter (39.37″) 5050 SMD LED
Dimensions 5000(L) x 10(W) x 2.5(H)mm (16.4′ x 25/64″ x 3/32″)
LEDs Type 5050 SMD LED
LED Angle 120°
Brightness 396-418 Lumens / ft (30.5cm)
Bend Radius 4″(100mm) Max, one flat plane
Lamp Life >25,000 hours estimated average*
Mount Smooth Surface/burrows free
Operating Temperature -25°C ~ +40°C (-13°F ~ 140°F)
  • Voltage 24 VDC Output / 120~277 VAC Input
    Power Supply Type Regulated Class 2
    IP Rating IP66 (Suitable for Indoor/Outdoor use)
    Warranty 5 Years
    $109.00 Add to cart More Info »
  • Sale!

    Voltage 24 VDC Output / 90~277 VAC Input
    Power Supply Type Regulated Class 2
    IP Rating IP65 (Indoor or Outdoor use)
    Warranty 3 Years
    $229.00 $199.00 Add to cart More Info »
  • Lengths 1 meter (3.28ft), 2 meter (6.56ft)
    Size  30mm (1.18″) x 26.5mm (1.04″)
    $16.75$33.50 Out of Stock More Info »
  • Size 1 meter x 18mm x 5.7mm
    Size (Imperial) 3.28 ft x 0.7″ x 0.22″
    Max Bend Radius 6″ (152.4mm)
    $13.50 Add to cart More Info »
  • Product Accessories

  • New

    WAGO's 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $0.95 Add to cart More Info »
  • New

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.25 Add to cart More Info »
  • Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

    $7.50 Add to cart More Info »
  • Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

    $2.75 Add to cart More Info »
  • S10W1 Single Connector with two pigtail wires at end. For Use with Class two power supplies. Max 4 Amps, 12/24V DC

    This connector is only compatible with Type A Flex Strip.

    Rated 5.00 out of 5
    $2.00 Add to cart More Info »
  • S10W2 Double Connector with wires in between. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with Type A Flex Strip.

    $3.00 Add to cart More Info »
  • S10W0 Splice Connector. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with Type A Flex Strip.

    Rated 4.00 out of 5
    $1.00 Add to cart More Info »
  • ST10 Single color 10mm T Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip. Note: T Connector comes with 3 pcs of Flexstrip connectors (S10W0).

    $4.00 Add to cart More Info »
  • SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip. Note: L Connector comes with 2 pcs of  Flexstrip connectors (S10W0).

    $3.00 Add to cart More Info »
  • SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip. Note: X Connector comes with 4 pcs of Flexstrip connectors (S10W0).

    $5.00 Add to cart More Info »
  • Reviews

    There are no reviews yet.

    Be the first to review “LED Grow Strip™ Triple Bright”

    Your email address will not be published. Required fields are marked *

    Product Description

    Deep Red LED Grow Strip and Blue Grow LED have a Nano-meter wavelength. LED Grow Strip is ideal for a specific range Laboratory growth.  Red comes in 660nm and Blue in 450-460nm wavelength.  The LED Grow Strip allows the full optimised LED light Spectrum with minimal light loss while combining the Blue and Red.

    LED World’s optional Bendable Channel and Linear adjustable Channel system used for ease of installation. Cut LED Grow strip at marked intervals and shape to create different grow structures. Thus delivers maximum power and precise lighting to areas that are difficult to reach with traditional light fixture.

    Moreover, LED Grow strips™ come with lead wires to enable easy connection to the Class 2 LED Power supply. Easily mountable into LED World’s Aluminium Channel profiles. Hence, Its small size and low voltage makes this lighting ideal for a wide range of grow applications. Cut to size by at each 6 LED (24VDC) intervals at marking points for custom length lighting.

    The strip comes in 24VDC and produces very little added heat, reducing the cost of cooling. This saves energy over standard HPS lighting solutions and reduces cost of operations in indoor grow operations.

    24V Triple Bright LED Grow Light roll comes in 16.4ft (5 meters) length.

    Note: This product requires an optional Class 2 regulated Power Supply (not included).

    See Accessory tab for further optional drivers

    Trademark Notice: LED Grow Strip™ is a registered Trademark of LED World Inc.


    Features & Benefits

    Shapes and bends to plant with optimized light spectrum. Use optional channel system for custom shapes
    Low power consumption and little heat generated
    24VDC operation, reduces hazards, UL/CSA Standards, ETL listed (indoor use only).
    LED Grow Strip™ seamlessly operates independently or alongside other lighting
    Can be cut to length at marked intervals for custom shapes and sizes
    IP22 rated for indoor use.

    LED Grow Strips™ Red and Blue Graph

    Grow Strip spectrum graph

    Technical Specifications

    Roll Size 5 Meters (16.4 Feet)
    Max Voltage 24 VDC (Regulated/Class 2)
    Watts/foot 4.4 Watts
    AMPs/Roll 3A
    Max Current/Ft 185mA
    Light Source 60pcs/meter (39.37″) 5050 SMD LED
    Dimensions 5000(L) x 10(W) x 2.5(H)mm (16.4′ x 25/64″ x 3/32″)
    LEDs Type 5050 SMD LED
    LED Angle 120°
    Brightness 396-418 Lumens / ft (30.5cm)
    Bend Radius 4″(100mm) Max, one flat plane
    Lamp Life >25,000 hours estimated average*
    Mount Smooth Surface/burrows free
    Operating Temperature -25°C ~ +40°C (-13°F ~ 140°F)
  • Voltage 24 VDC Output / 120~277 VAC Input
    Power Supply Type Regulated Class 2
    IP Rating IP66 (Suitable for Indoor/Outdoor use)
    Warranty 5 Years
    $109.00 Add to cart More Info »
  • Sale!

    Voltage 24 VDC Output / 90~277 VAC Input
    Power Supply Type Regulated Class 2
    IP Rating IP65 (Indoor or Outdoor use)
    Warranty 3 Years
    $229.00 $199.00 Add to cart More Info »
  • Lengths 1 meter (3.28ft), 2 meter (6.56ft)
    Size  30mm (1.18″) x 26.5mm (1.04″)
    $16.75$33.50 Out of Stock More Info »
  • Size 1 meter x 18mm x 5.7mm
    Size (Imperial) 3.28 ft x 0.7″ x 0.22″
    Max Bend Radius 6″ (152.4mm)
    $13.50 Add to cart More Info »
  • Product Accessories

  • New

    WAGO's 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $0.95 Add to cart More Info »
  • New

    WAGO’s 221-415  COMPACT Splicing Connector is 40 % smaller than the 222 Series.  Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).

    $1.25 Add to cart More Info »
  • Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm

    $7.50 Add to cart More Info »
  • Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.  

    $2.75 Add to cart More Info »
  • S10W1 Single Connector with two pigtail wires at end. For Use with Class two power supplies. Max 4 Amps, 12/24V DC

    This connector is only compatible with Type A Flex Strip.

    Rated 5.00 out of 5
    $2.00 Add to cart More Info »
  • S10W2 Double Connector with wires in between. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with Type A Flex Strip.

    $3.00 Add to cart More Info »
  • S10W0 Splice Connector. For use with Class two power supplies. Max 4 Amps, 12/24V DC.

    This connector is only compatible with Type A Flex Strip.

    Rated 4.00 out of 5
    $1.00 Add to cart More Info »
  • ST10 Single color 10mm T Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip. Note: T Connector comes with 3 pcs of Flexstrip connectors (S10W0).

    $4.00 Add to cart More Info »
  • SL10 Single color 10mm L corner Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip. Note: L Connector comes with 2 pcs of  Flexstrip connectors (S10W0).

    $3.00 Add to cart More Info »
  • SX10 Single color 8mm X Connector. Low voltage use only, max 3 Amps. This connector is only compatible with Type A Flex Strip. Note: X Connector comes with 4 pcs of Flexstrip connectors (S10W0).

    $5.00 Add to cart More Info »
  • Reviews

    There are no reviews yet.

    Be the first to review “LED Grow Strip™ Triple Bright”

    Your email address will not be published. Required fields are marked *

    About Us

    Founded in 1995, LED World is an OEM of LED strip lighting, sign modules, dimmable and regulated Class 2 Power supplies. We supply Electricians, Designers, Electrical Contractors and Manufactures of quality and innovative commercial lighting products. We have a wide range of RGB color changing LED Strips, aluminium profiles, DMX wall washers and color controllers for interior and exterior applications. Most of our products are UL or Intertek listed.

    Connect


    visa   mastercard   discover   paypal 
    Secure Electronic Payment Processing