Your cart is currently empty!
Stop the Spots! The EvenBrighter Cinco Series LED Flex Strip with 192 (2110 SMD) LEDs per foot for high light output. The high density of LEDs creates a even light distribution that has no spots from as little 1/4” way from the light (7mm) when used in combination with our optional Aluminum profile.
The dimmable LED Strip is available in Warm White (3000K) and Neutral white (4100K) with a coloring rendering index (CRI) of 90 or better. High CRI means better color definition in jewelry display cases, cosmetics displays, food displays and under cabinet lighting. The high lumen output of up to 90 to 100 lumens per watt allows this strip to be used in many commercial applications.
Type A Flex Strip is suitable for dry location use. It comes in 2m (6.54 feet) and 4m (13.1 feet) long roll options. Ideal lighting where LED dots of traditional LED strips are not wanted to be seen when mounted in the optional Aluminum Profile.
Ideal for applications such as architectural lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation. Our Flex Strips come with lead wires to enable easy connection to the Class 2 Regulated LED Power supply and Dimmable Class 2 Driver.
The 10mm (3/8”) wide LED Strip can be easily mounted into LED World’s Aluminum Channel profiles. The small size and low voltage makes this lighting ideal for a wide range of applications. Cut marks at each 7 LED (11.1mm / 0.43inch) intervals at marking points only.
Use EvenBrighter FA630M21-XM-24V-X LED Strip with LED World’s Aluminum profiles for better heat dissipation.
Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories are not included with this product. See under Accessories section.
| High density, No spotting even lighting |
| Dimmable |
| View angle 120° |
| Double sided 3M tape backing |
| Ultra bright surface mount LEDs |
| CRI 90 or better |
| 2110 super bright LEDs, perfect color consistency |
| Long life of LEDs, LM-80 tested LEDs |
| Can be cut to size at marked intervals only |
| Length | 2m (6.5ft), 4m (13.1ft) | |
| LED Type | 2110 SMD LED | |
$57.00 – $114.00
Stop the Spots! The EvenBrighter Cinco Series LED Flex Strip with 192 (2110 SMD) LEDs per foot for high light output. The high density of LEDs creates a even light distribution that has no spots from as little 1/4” way from the light (7mm) when used in combination with our optional Aluminum profile.
The dimmable LED Strip is available in Warm White (3000K) and Neutral white (4100K) with a coloring rendering index (CRI) of 90 or better. High CRI means better color definition in jewelry display cases, cosmetics displays, food displays and under cabinet lighting. The high lumen output of up to 90 to 100 lumens per watt allows this strip to be used in many commercial applications.
Type A Flex Strip is suitable for dry location use. It comes in 2m (6.54 feet) and 4m (13.1 feet) long roll options. Ideal lighting where LED dots of traditional LED strips are not wanted to be seen when mounted in the optional Aluminum Profile.
Ideal for applications such as architectural lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation. Our Flex Strips come with lead wires to enable easy connection to the Class 2 Regulated LED Power supply and Dimmable Class 2 Driver.
The 10mm (3/8”) wide LED Strip can be easily mounted into LED World’s Aluminum Channel profiles. The small size and low voltage makes this lighting ideal for a wide range of applications. Cut marks at each 7 LED (11.1mm / 0.43inch) intervals at marking points only.
Use EvenBrighter FA630M21-XM-24V-X LED Strip with LED World’s Aluminum profiles for better heat dissipation.
Note: This product requires an optional Class 2 Power Supply (not included).
Note: Accessories are not included with this product. See under Accessories section.
| High density, No spotting even lighting |
| Dimmable |
| View angle 120° |
| Double sided 3M tape backing |
| Ultra bright surface mount LEDs |
| CRI 90 or better |
| 2110 super bright LEDs, perfect color consistency |
| Long life of LEDs, LM-80 tested LEDs |
| Can be cut to size at marked intervals only |
| Watts/foot | 6.6 W/ft |
| Max Voltage | 24 VDC (Regulated/Class 2) |
| Amps | 1.8 (2m roll), 3.6 (4m roll) |
| Brightness | 590-620 Lumens / ft (30.5cm) |
| Roll Size | 2 Meters (6.5 ft), 4 Meters (13.1 ft) |
| Light Source | 630 pcs/meter (39.37″) 2110 SMD LED |
| Dimensions | 10mm(W) x 1.0mm(H) (25/64″ x 3/100″) |
| LEDs Type | 2110 SMD LED |
| LED Angle | 120° |
| Bend Radius | 0.78″(20mm) Max, one flat plane |
| Lamp Life | >25,000 hours estimated average |
| Mount | Smooth Clean Surface – burrows free (ambient temperature) |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ 104°F) |
| Max Continuous Load | 96 W |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 60 W |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 30 W |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 192W (2 Tap x 96W) |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 2 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 288W (3 Tap x 96W) |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3 x 4A |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 90 W |
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 3.75A |
| Max Continuous Load | 100 W |
|---|---|
| Voltage | 24 VDC Output / 100~277 VAC Input |
| Rated Current | 4.16A |
| Power Supply Type | DMX512 Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 96 W (77 W continuous) |
|---|---|
| Voltage | 24 VDC Output / 120 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
|---|---|
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
|---|---|
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
|---|---|
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
|---|---|
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
| Length | 1 meter (3.28ft) |
|---|---|
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
| Lengths | 2 meter (6.56ft) |
|---|---|
| Included Items | Opaque lens |
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
|---|---|
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Reviews
There are no reviews yet.