1-800-387-4081
The new LED Strip Quattro Bright series with CRI 90 or better features a 5630 LED. In addition, it is IC regulated for maximum light output and long life of LEDs. Although the LED Strip is a constant voltage 12VDC, each interval section on the LED Strip has a IC chip. IC Chip regulates the current and temperature to protect the LED Strip. The Type A Flex Strip comes in 3 meters long (9.84 feet) roll. Hence, it is ideal for under counter lighting. QL-F-5630A30SA-X-12C LED Strip features lumens of up to 440lm/ft.
With Constant Current IC for each section, there is no need of constant current driver. Moreover, it works with Standard Class 2 DC12V constant voltage power supply and dimmable LED Drivers.
Designed for the lighting professional, this lighting can be used for applications such as architectural lighting, under counter lighting, under cabinet lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation.
Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The LED Strip can be easily mounted into LED World’s Aluminum Channel profiles. Its small size and low voltage makes this lighting ideal for a wide range of applications.
Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories are not included with this product. See Accessories tab above.
Features
| Constant Current IC |
| Temperature sensor to Protect LED Strip from Temperature change |
| 90-100 lumens per watt |
| 5630 SMD (Quattro Bright Series) CRI >90 |
| View Angle 120° |
| Package: 3 meters (9.8ft) |
| Little or no heat, low power consumption |
| Can be cut to size at marked intervals |
| Continuous length |
| Flexible LED Light Strips |
| Solid-state, high vibration resistant |
| Dimmable via any 12 VDC PWM or Dimmable LED Driver |
| cULus Standard |
Product Description
The new LED Strip Quattro Bright series with CRI 90 or better features a 5630 LED. In addition, it is IC regulated for maximum light output and long life of LEDs. Although the LED Strip is a constant voltage 12VDC, each interval section on the LED Strip has a IC chip. IC Chip regulates the current and temperature to protect the LED Strip. The Type A Flex Strip comes in 3 meters long (9.84 feet) roll. Hence, it is ideal for under counter lighting. QL-F-5630A30SA-X-12C LED Strip features lumens of up to 440lm/ft.
With Constant Current IC for each section, there is no need of constant current driver. Moreover, it works with Standard Class 2 DC12V constant voltage power supply and dimmable LED Drivers.
Designed for the lighting professional, this lighting can be used for applications such as architectural lighting, under counter lighting, under cabinet lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation.
Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The LED Strip can be easily mounted into LED World’s Aluminum Channel profiles. Its small size and low voltage makes this lighting ideal for a wide range of applications.
Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories are not included with this product. See Accessories tab above.
Features
| Constant Current IC |
| Temperature sensor to Protect LED Strip from Temperature change |
| 90-100 lumens per watt |
| 5630 SMD (Quattro Bright Series) CRI >90 |
| View Angle 120° |
| Package: 3 meters (9.8ft) |
| Little or no heat, low power consumption |
| Can be cut to size at marked intervals |
| Continuous length |
| Flexible LED Light Strips |
| Solid-state, high vibration resistant |
| Dimmable via any 12 VDC PWM or Dimmable LED Driver |
| cULus Standard |
Technical Specifications
| Watts/foot | 4.6 W/ft |
| Max Voltage | 12 VDC (Class 2 Type power) |
| Amps/Roll | 3.75 Amps |
| Brightness | 426-457 Lumens / ft (30.5 cm) (Warm White) |
| 472-503 Lumens / ft (30.5 cm) (Neutral White) | |
| 503-533 Lumens / ft (30.5 cm) (Pure White) | |
| Light Source | 60pcs/meter (39.37″) 5630 LED |
| Dimensions | 5000(L) x 10(W) x 1.2(H)mm (16.4′ x 3/8″ x 0.04″) |
| LEDs Type | 5630 SMD |
| Max Length | 3 meters (9.8 feet) |
| LED Angle | 120° |
| Bend Radius | Max 100mm (4″) |
| Lamp Life | >35,000 hours estimated average* |
| IP Rating | IP20 Type A |
Dimmable LED Drivers
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2
| Max Continuous Load | 180W (3 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2
| Max Continuous Load | 180W (3 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 LED Power Supply YHY-12005000
| Max Continuous Load | 60 W (48 W continuous) |
| Voltage | 12 VDC Output / 100~240 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Aluminium Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
2 Pin Strip to Power Clamp Connector – CL10XB-2G
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
2 Pin Strip to Strip Clamp Connector – CL10BB-2G
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Product Description
The new LED Strip Quattro Bright series with CRI 90 or better features a 5630 LED. In addition, it is IC regulated for maximum light output and long life of LEDs. Although the LED Strip is a constant voltage 12VDC, each interval section on the LED Strip has a IC chip. IC Chip regulates the current and temperature to protect the LED Strip. The Type A Flex Strip comes in 3 meters long (9.84 feet) roll. Hence, it is ideal for under counter lighting. QL-F-5630A30SA-X-12C LED Strip features lumens of up to 440lm/ft.
With Constant Current IC for each section, there is no need of constant current driver. Moreover, it works with Standard Class 2 DC12V constant voltage power supply and dimmable LED Drivers.
Designed for the lighting professional, this lighting can be used for applications such as architectural lighting, under counter lighting, under cabinet lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation.
Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The LED Strip can be easily mounted into LED World’s Aluminum Channel profiles. Its small size and low voltage makes this lighting ideal for a wide range of applications.
Note: This product requires an optional Class 2 Power Supply (not included)
Note: Accessories are not included with this product. See Accessories tab above.
Features
| Constant Current IC |
| Temperature sensor to Protect LED Strip from Temperature change |
| 90-100 lumens per watt |
| 5630 SMD (Quattro Bright Series) CRI >90 |
| View Angle 120° |
| Package: 3 meters (9.8ft) |
| Little or no heat, low power consumption |
| Can be cut to size at marked intervals |
| Continuous length |
| Flexible LED Light Strips |
| Solid-state, high vibration resistant |
| Dimmable via any 12 VDC PWM or Dimmable LED Driver |
| cULus Standard |
Technical Specifications
| Watts/foot | 4.6 W/ft |
| Max Voltage | 12 VDC (Class 2 Type power) |
| Amps/Roll | 3.75 Amps |
| Brightness | 426-457 Lumens / ft (30.5 cm) (Warm White) |
| 472-503 Lumens / ft (30.5 cm) (Neutral White) | |
| 503-533 Lumens / ft (30.5 cm) (Pure White) | |
| Light Source | 60pcs/meter (39.37″) 5630 LED |
| Dimensions | 5000(L) x 10(W) x 1.2(H)mm (16.4′ x 3/8″ x 0.04″) |
| LEDs Type | 5630 SMD |
| Max Length | 3 meters (9.8 feet) |
| LED Angle | 120° |
| Bend Radius | Max 100mm (4″) |
| Lamp Life | >35,000 hours estimated average* |
| IP Rating | IP20 Type A |
Dimmable LED Drivers
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2
| Max Continuous Load | 180W (3 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Regulated LED Drivers
300W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-300VTD52JV2
| Max Continuous Load | 300W (5 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
180W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-180VTD52JV2
| Max Continuous Load | 180W (3 Tap x 60W) |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
60W 12VDC Class 2 LED Power Supply YHY-12005000
| Max Continuous Load | 60 W (48 W continuous) |
| Voltage | 12 VDC Output / 100~240 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
60W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-060VTDHV2
| Max Continuous Load | 60 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
30W 12VDC Class 2 Triac/0-10V Dimmable LED Driver MD-012-030VTDHV2
| Max Continuous Load | 30 W |
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
Aluminium Channel
Aluminum Channel Standard AC-1707
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Wide Standard Aluminum Channel AC-2310
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Round Aluminum Channel AC-LA01
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Corner Cove Aluminum LED Profile AC-3030G
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Aluminum Recessed Channel AC-AR1-1M
| Length | 1 meter (3.28ft) |
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
Drywall Aluminum LED Channel AC-501520-2M
| Lengths | 2 meter (6.56ft) |
| Included Items | Opaque lens |
Round Aluminum LED Channel AC-R008
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
Product Accessories
2 Pin Strip to Power Clamp Connector – CL10XB-2G
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
2 Pin Strip to Strip Clamp Connector – CL10BB-2G
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Mini 2 Pin Strip to Strip Clamp Connector – CL10BB-2
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO 221-412 Splicing Connector
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-413 Splicing Connector
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO 221-415 Splicing Connector
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
H05-415 Wago Cable Connector
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
H05 Power Connector
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
LED Low Voltage Mini Dimmer DIM-2430A
| Max Voltage | 12V~24VDC (Class 2 regulated) |
| Output | 1 channel 30-Amps (peak) |
| Dimension | L 86 x W 60 x H 35 mm (3.46″ L x 2.36″ W x 1.37″ H) |
| Brightness | 0% to 100% |
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.