Your cart is currently empty!
Bright Plus LED Flex Strip is a low voltage (24VDC) LED lighting in a flexible ultra sleek thin PCB strip. Bright Plus, Type A Flex Strip is suitable for dry locations. 24V Bright Plus LED Flex Strip roll comes in 10 meters long (32.8 feet) allowing for long runs of LED lighting in cove applications and other applications where longer runs of lighting are needed.
Designed for the lighting professional, this lighting can be used for architectural lighting, sign letter lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation.
Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible and can be easily mounted onto most flat, clean dry surfaces free of burrows.
Its small size and low voltage makes this lighting ideal for a wide range of applications.
Strip can be cut to size by at each 6 LED intervals at marked cutting points(24VDC).
Note: This product requires an optional Class 2 Power Supply (not included).
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat generated |
| Flexible LED light strips |
| Long life of LEDs |
| No RF interference |
| Solid state lighting |
| Length | 32.8 feet (10 meters) |
| Color Temperature | 3000K, 5200K |
| IP Rating | IP22 Indoor Type A |
$89.00
Bright Plus LED Flex Strip is a low voltage (24VDC) LED lighting in a flexible ultra sleek thin PCB strip. Bright Plus, Type A Flex Strip is suitable for dry locations. 24V Bright Plus LED Flex Strip roll comes in 10 meters long (32.8 feet) allowing for long runs of LED lighting in cove applications and other applications where longer runs of lighting are needed.
Designed for the lighting professional, this lighting can be used for architectural lighting, sign letter lighting, concealed lighting, perimeter lighting and many other applications. LED Flex Strip Lighting has a 3M tape backing for easy installation.
Our Flex Strips come with lead wires to enable easy connection to the Class 2 LED Power supply. The base of the Flex Strips are flat and flexible and can be easily mounted onto most flat, clean dry surfaces free of burrows.
Its small size and low voltage makes this lighting ideal for a wide range of applications.
Strip can be cut to size by at each 6 LED intervals at marked cutting points(24VDC).
Note: This product requires an optional Class 2 Power Supply (not included).
| Dimmable via LED World’s optional dimming solutions |
| Double sided 3M tape |
| Low power consumption and little heat generated |
| Flexible LED light strips |
| Long life of LEDs |
| No RF interference |
| Solid state lighting |
| Roll Size | 10 Meters (32.8 feet) |
| Max Voltage | 24 VDC (regulated) |
| Watts/foot | 2.2 |
| AMPs/Roll | 3A |
| Max Current/Ft | 91~92mA |
| Light Source | 30pcs/meter (39.37″) 5050 SMD LED |
| Dimensions | 10,000(L) x 10(W) x 2.5(H)mm (32.8′ x 3/8″x 3/32″) |
| Max Length | 10 Meters (33 feet) |
| LED Angle | 120° |
| Brightness | 198-209 Lumens / ft (30.5cm) |
| Bend Radius | 4″ (100mm) Max, one flat plane |
| Lamp Life | >25,000 hours estimated average* |
| IP Rating | IP22 type A |
| Mount | Smooth Solid Surface – burrows free |
| Operating Temperature | -25°C ~ +40°C (-13°F ~ 104°F) |
| Max Continuous Load | 300W (5 Tap x 60W) |
|---|---|
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 180W (3 Tap x 60W) |
|---|---|
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 30 W |
|---|---|
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 60 W |
|---|---|
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 300W (5 Tap x 60W) |
|---|---|
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 180W (3 Tap x 60W) |
|---|---|
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 60 W (48 W continuous) |
|---|---|
| Voltage | 12 VDC Output / 100~240 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor use) |
| Max Continuous Load | 30 W |
|---|---|
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Max Continuous Load | 60 W |
|---|---|
| Voltage | 12 VDC Output / 100~277 VAC Input |
| Power Supply Type | Regulated Class 2 (Indoor/Outdoor use) |
| Available Lengths | 1 meter(3.28ft), 2 meter(6.56ft) |
|---|---|
| Size | 17.5mm (0.68″) x 7mm (0.27″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
| Available Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
|---|---|
| Size | 23.5mm (0.92″) x 11mm (0.43″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
| Available Lengths | 1 meter (3.28ft), 2 meter(6.56ft) |
|---|---|
| Size | W 16mm (0.62″) x H 16mm (0.62″) |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
|---|---|
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
| Length | 1 meter (3.28ft) |
|---|---|
| Size | 17.1mm x 8.6mm (0.67″ x 0.33″) |
| Included Items | Opaque lens, End cap pair |
| Lengths | 2 meter (6.56ft) |
|---|---|
| Included Items | Opaque lens |
| Lengths | 1 meter (3.28ft), 2 meter (6.56ft) |
|---|---|
| Size | ø 20.8mm |
| Included Items | Opaque lens, Mounting clip pair, End cap pair |
CL10XB-2G connector makes it easy to connect single color 10mm wide LED strip to wire. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
CL10BB-2G connector makes it easy to join two single color 10mm wide LED strips together. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
Mini CL10BB-2 connector makes it easy to join two single color 10mm wide LED strips together in a narrow space. This transparent connector makes strip lighting seamless. Use only with LED World’s 10mm wide Type A (IP20) Flex Strip (Not silicone coated or covered). Max 5 Amps, 12/24V DC. Use only with Class 2 power supply. Indoor dry location use.
WAGO’s 221-412 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 2-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO’s 221-413 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 3-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
WAGO’s 221-415 COMPACT Splicing Connector is 40 % smaller than the 222 Series. Accommodate 5-wire connections with stranded wires from 0.14 to 4 mm², as well as solid and fine-stranded wires from 0.2 to 4 mm² (24–12 AWG).
Low voltage cable connector with 4 terminals lever clamps to connect wire to DC male end 2.1 x 5.5mm
Low voltage 20″ DC connector with one 2.1 x 5.5mm DC Plug Female at one end and two pigtail wires, red (+) and black (-) at the other end.
Reviews
There are no reviews yet.