1-800-387-4081
902 MHz- Constant Voltage LED Dimmers deliver 65,000 PWM dimming steps to provide ultra smooth dimming performance through all light levels.
These tiny dimmers are 1/2 to 1/4 the size of other LED dimmers and overcome a major challenge faced by traditional LED dimmers; the devices eliminate the issue of choppiness at low dim levels.
Through the use of thousands of PWM dimming steps, the ILLUMRA Constant Voltage LED Dimmers create what is perceived by the natural eye as a single continuous dim — even at low light levels.
The dimmers are perfect for energy-saving applications such as architectural dimming, daylighting, load shedding, and manual ON / automatic OFF control. The dimmers may also be used for custom lighting applications. The wireless Dimmer (E3X-D02FP) responds to self-powered wireless light switches, self-powered wireless sensors, wired sensors, and wired switches.
Note: Use only with Low Voltage Class 2 Power Supply (8-28VDC, 40mA – not incl. load current)
Pairing Wireless Switch and Receiver
1) Press LNK button on 902MHz Receiver for 0.5 seconds
2) LED Lights will start to Blink
3) On 902MHz wireless switch press the Top of the Rocker Button once
4) Wait for 30 seconds or Press LNK button on 902MHz for 2 seconds. If LED light stop blinking, both Switch and Receiver are paired and ready to use.
5) Press CLR button to reset pairing and start all over again.
Product Description
902 MHz- Constant Voltage LED Dimmers deliver 65,000 PWM dimming steps to provide ultra smooth dimming performance through all light levels.
These tiny dimmers are 1/2 to 1/4 the size of other LED dimmers and overcome a major challenge faced by traditional LED dimmers; the devices eliminate the issue of choppiness at low dim levels.
Through the use of thousands of PWM dimming steps, the ILLUMRA Constant Voltage LED Dimmers create what is perceived by the natural eye as a single continuous dim — even at low light levels.
The dimmers are perfect for energy-saving applications such as architectural dimming, daylighting, load shedding, and manual ON / automatic OFF control. The dimmers may also be used for custom lighting applications. The wireless Dimmer (E3X-D02FP) responds to self-powered wireless light switches, self-powered wireless sensors, wired sensors, and wired switches.
Note: Use only with Low Voltage Class 2 Power Supply (8-28VDC, 40mA – not incl. load current)
Pairing Wireless Switch and Receiver
1) Press LNK button on 902MHz Receiver for 0.5 seconds
2) LED Lights will start to Blink
3) On 902MHz wireless switch press the Top of the Rocker Button once
4) Wait for 30 seconds or Press LNK button on 902MHz for 2 seconds. If LED light stop blinking, both Switch and Receiver are paired and ready to use.
5) Press CLR button to reset pairing and start all over again.
Technical Specifications
| Range | 50-150 feet (typical) |
| Frequency | 902 MHz |
| Power Supply Input Rating | 8-28VDC, 40mA (not incl. load current) |
| Connectors | Flying Leads |
| Output Rating | Constant voltage 0-28VDC, 5A max. |
| Inputs | Power |
| Output Channels | 1 output PWM dimming |
| Memory | Stores up to 25 unique wireless transmitter IDs in memory |
| Operating Temperature | -13° to +140°F (- 25° to + 60°C) |
| Storage Temperature | -40° to +140°F (- 40° to + 60°C) |
| Dimensions | 2.88″(W) x 1.30″(H) x 0.67″(D) 7.32cm x 3.30cm x 1.70cm |
Wireless LED Dimmer Control
Product Accessories
Wireless LED Dimming Switch 902MHz E9T-S1AXX
Single Rocker Decorator style battery-free wireless switch. Includes basic switch, backplate and faceplate. (902 MHz). Works with the E9X-D02FL Constant Voltage LED Dimmers.
Product Description
902 MHz- Constant Voltage LED Dimmers deliver 65,000 PWM dimming steps to provide ultra smooth dimming performance through all light levels.
These tiny dimmers are 1/2 to 1/4 the size of other LED dimmers and overcome a major challenge faced by traditional LED dimmers; the devices eliminate the issue of choppiness at low dim levels.
Through the use of thousands of PWM dimming steps, the ILLUMRA Constant Voltage LED Dimmers create what is perceived by the natural eye as a single continuous dim — even at low light levels.
The dimmers are perfect for energy-saving applications such as architectural dimming, daylighting, load shedding, and manual ON / automatic OFF control. The dimmers may also be used for custom lighting applications. The wireless Dimmer (E3X-D02FP) responds to self-powered wireless light switches, self-powered wireless sensors, wired sensors, and wired switches.
Note: Use only with Low Voltage Class 2 Power Supply (8-28VDC, 40mA – not incl. load current)
Pairing Wireless Switch and Receiver
1) Press LNK button on 902MHz Receiver for 0.5 seconds
2) LED Lights will start to Blink
3) On 902MHz wireless switch press the Top of the Rocker Button once
4) Wait for 30 seconds or Press LNK button on 902MHz for 2 seconds. If LED light stop blinking, both Switch and Receiver are paired and ready to use.
5) Press CLR button to reset pairing and start all over again.
Technical Specifications
| Range | 50-150 feet (typical) |
| Frequency | 902 MHz |
| Power Supply Input Rating | 8-28VDC, 40mA (not incl. load current) |
| Connectors | Flying Leads |
| Output Rating | Constant voltage 0-28VDC, 5A max. |
| Inputs | Power |
| Output Channels | 1 output PWM dimming |
| Memory | Stores up to 25 unique wireless transmitter IDs in memory |
| Operating Temperature | -13° to +140°F (- 25° to + 60°C) |
| Storage Temperature | -40° to +140°F (- 40° to + 60°C) |
| Dimensions | 2.88″(W) x 1.30″(H) x 0.67″(D) 7.32cm x 3.30cm x 1.70cm |
Wireless LED Dimmer Control
Product Accessories
Wireless LED Dimming Switch 902MHz E9T-S1AXX
Single Rocker Decorator style battery-free wireless switch. Includes basic switch, backplate and faceplate. (902 MHz). Works with the E9X-D02FL Constant Voltage LED Dimmers.
Reviews
There are no reviews yet.
Reviews
There are no reviews yet.